SPECIAL REPAIR TO REFUELER BAY OF REFUELING SECTION AND PROVN OF FENCING AROUND SMALL ARMS RANGE, SHED FOR MAFI ASSETS ALONGWITH TOILET FACILITY NEAR SAFETY BAY AT AF STN BHUJ

Amount

Demolition Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge

Material & labour for cement concrete C2 1:3:6 (40mm graded aggregate), 75mm thick as in plinth protection, etc., laid in alternate bays, finishing concrete surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

Material & labour for forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'B' complete all as specified and directed by Engineer-in-Charg

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr-in-Charge.

Use & waste of form work to side and soffits of floor or roof beams, lintels, cantilever, shelves including supports etc for rough finished surface of concrete complete all as specified and directed by Engr-in-Charge.

Materal & labour for RCC M-25 design mix by using 20 mm graded crushed stone aggregate as in beams supported on walls complete all as specified and directed by Engineer-in-Charge

Use & waste of form work to soffits of suspended slabs, such as roof slabs floor slabs and similar work not exc 200 mm thick for rough finished surfaces of concrete complete all as specified and directed by Engineer-in-Charge

Material & labour for reinforced cement concrete M-25 design mix in slab supported on walls, beams and column in floor roof and landing all as specified complete all as specified and directed by Engineer-in-Charge.

Supply & fix TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.

All as per item no. 9.00 abvoe, but 5 MM dia and over upto and including 10MM dia in stirrups spacers and binders. complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by the Engineer-in-Charge.

Supply & fix GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed by the Engineer-in-Charge.

Material & labour for rendering 15mm thick in cement sand mortar 1:4 on fair faces of brick work, PCC block masonry or concrete surfaces, mixed with water proofing compound and finished even and smooth without using extra cement as per manufacturer's instructions complete all as specified and directed by the Engineer-in-Charge. Note:- (a) Supply only Integral water proofing compound will be measured and paid seperately (b) Height of building may vary from 3 m to 6 m.

Supply only integral water proofing compound complete all as specified and directed by the Engineer-in-Charge

Material & labour for 10mm thick cement plastering in cement mortar 1:6 on fair faces of stone work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by the Engineer-in-Charge Note: Height of building may vary from 3 m to 6 m.

Material & labour for 5 mm thick cement plastering in cement mortar 1:3 on fair faces of ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed by the Engineer-in-Charge Note: Height of building may vary from 3 m to 6 m.

Material & labour for preparation of new or previously untreated concrete/plaster surfaces and applying two coats of exterior emulsion paint (in camouflage pattern) as approved by the GE over a coat of primer complete all as specified and directed by the Engineer-in-Charge.

Material & labour for preparation of new surfaces of wall surfaces and applying three coats of color wash, complete all as specified and directed by the Engineer-in-Charge.

Material & labour for complete removal of existing treatment from old decorated plastered surfaces of walls by Vaccum based sand machine complete all as specified, and applying two coats of color wash, complete all as specified and directed by the Engineer-in-Charge.

Material & labour for preparation of new untreated surfaces of ceiling and appying three coats of white wash complete all as specified and directed by the Engineer-in-Charge

Material & labour for rendering 10mm thick in CM 1:3 over RCC roof mixed with water proofing compound @ 3% by weight of cement finished even and fair without using extra cement complete all as specified and directed by the Engineer-in-Charge.

Material & labour for priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 complete all as specified and directed by the Engineer-in-Charge.

Material & labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed by the Engineer-in-Charge.

Excavation in trenches n.exc. 1.5 m wide and n exc 1.5 m deep for foundation etc.in any type of soil and getting out complete all as specified and directed by the Engineer-in-Charge.

Material & labour for cement concrete 1:4:8 D-2(Using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by the Engineer- in-Charge.

Material & labour for reinforced cement concrete M-25 design mix as in footings, foundation beams, plinth beams, bases for column etc complete all as specified and directed by the Engineer-in-Charge.

Material & labour for reinforced cement concrete M-25 design mix in column, pillar, piers, posts and struts complete all as specified and directed by Engr-in-Charge.

Material & labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified and directed by the Engineer-in-Charge. complete all as specified and directed by Engr-in-Charge.

Material & labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces complete all as specified and directed by the Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in concrete complete all as specified and directed by the Engineer- in-Charge.

Dismantling fencing wire mesh, any type complete all as specified and directed by the Engineer- in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed by the Engineer-in-Charge.

Material & labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410- W(Gde- E-250) quality- B complete all as specified and directed by the Engineer-in-Charge.

Material and labour for preparing new or previously untreated surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface complete all as specified and directed by the Engineer-in-Charge.

Removing excavated materials at a distance exc 250m and n. exc 500m and depositing/spreading and leveling where directed at a level of n. exc above the starting point complete all as specified and directed by the Engineer-in-Charge.

Returning filling in excavated soil in layers n.exc. 25cm thick including spreading, leveling, ramming and watering complete all as specified and directed by the Engineer- in-Charge.

Demolition of PCC block masonry built in cement mortar complete all as specified and directed by the Engineer- in-Charge.

Material & labour for pre-cast cement concrete block masonry with solid blocks of mix (1:3:6) type C1 exc.10 CM in width and setting in cement mortar (1:6) Complete complete all as specified and directed by the Engineer-in-Charge.

Material & labour for 100 mm thick for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in path/ hard standing finishing smooth without using extra cement complete all as specified and directed by the Enginer-in-Charge.

Material & labour for 100 mm thick for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in path/ hard standing complete all as specified and directed by the Engineer-in-Charge.

Material & labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor FRLSH PVC insulated but unsheathed cable 1100 volts grade drawn through and including rigid steel ERW conduit of 20 mm dia (external) heavy duty including necessay flame proof /weather proof conduit accessories and fitting concealed in wall/ceiling etc including sealing threaded jointsin conduit accessories with teflon tape including 1.5 sqmm single core FRLSH PVC insulated but unsheathed multistranded copper conductor cable as in continuous earth.Wiring shall be suitable for flame proof area as per STEC-7 for One flame proof light point/fan point controlled by one,single pole flame proof switch complete all as specified and directed by Engineer-in-Charge.

All as per item No.41.00 here-in-before but with 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge. .

Supply & fixing flame proof/weather proof 4 feet LED light fitting 2x20 Watt CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix flame proof and weather proof rotary type switch,16 Amps,230 Volts,AC single pole, (LM-6) aluminium alloy with flame proof cable entry glands CMRS certified,ISI marked complete all as specified and directed by Engineer-in-Charge

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 2.5 Sqmm single core, copper conductor drawn through ERW steel conduit heavy duty ISI mark of size 20 mm external dia and 2.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engr-in-Charge. (Note: Two runs of conductor with one run of earth wire and one run of conduit will be measured & paid as one unit)

Excavating in post holes in hard/dense soil(or similar holes) each n exc 0.5cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed withearth around, in layers not exceeding 25 cm complete all as specified and directed by the Engineer- in-Charge.

Supply & fix of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 and purlin, wind ties, gusseted plate,sliding purlin for steel tube trusses; fixed with angle cleats or other connecting plates complete all as specified and directed by the Engineer-in-Charge.

Material & labour for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by the Enginer-in-Charge.

Material & labour for cement concrete 1:3:6 C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by the Engineer- in-Charge.

Supply & fix of hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts ,posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by the Engineer-in-Charge.

Material & labour for mild steel screw bolts 11 to 15 mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed by the Engineer-in-Charge.

Supply only chain link MS galvanised fencing of 3.15mm dia of wire and 40mm X40mm mesh size (pitch of wires) conforming to IS 2721: 2003 including line wires of 4mm dia straining bolts, etc including provision of binding wire complete all as specified and directed by the Engineer-in-Charge.

Supply & fix for MS framed work by fabrication such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, waik ways railing framed of watertanks etc including portions framed and hung as gates including pintle hinges, stops, hand-made sliding bolts etc conforming to Fe-290, Gde- E-165, complete all as specified and directed by the Engineer-in-Charge.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in any type of complete all as specified and directed by the Engineer- in-Charge.

Material & labour for 100 mm thick plain cement concrete type C-2 1:3:6 (using 40mm graded aggregate) as in sub base under interlocking tiles complete all as specified and directed by the Engineer- in-Charge.

Material & labour for 60mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed by the Engineer-in-Charge.

Material & labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by the Engineer-in-Charge. ( Note : For measurement purpose punned thickness shall be considered)

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains, for shafts, wells, cesspits, manholes, pier holes, etc (not exceeding 1.5m in width or 10 sqm on plan), all kind of soil including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m complete for getting out in all kind of soil complete all as specified and directed by the Engineer- in-Charge.

Material & labour for rendering 5mm thick on fair faces of concrete surface in CM 1:3 and rendering is ot be finished even and smooth with out using extra cement complete all as specified and directed by the Engineer-in-Charge.

Material & labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by the Engineer-in-Charge.

Material & labour for cement concrete 1:2:4 B-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by the Engineer- in-Charge.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in Soft/ loose soil soil complete all as specified and directed by Engineer-in-Charge.

Material & labour for Use & waste of form work to side and soffits of floor or roof beams, lintels, cantilever, shelves including supports etc for rough finished surface of conc complete all as specified and directed by Engr-in-Charge.

Material & labour for reinforced cement concrete nominal mix type B-1 1:2:4( using 20 mm graded stone aggregate) in beam and cantilever, lintels over 1.5 m span complete all as specified and directed by Engr-in-Charge.

Material & labour for rendering 10mm thick in CM 1 : 6 on fair faces of conc, brick work surface incl finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of wall primer complete all as specified and directed by Engr-in-Charge.

Supply & fix anodised aluminium frame powder coated for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

Supply & fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed by Engr-in-Charge.

Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by Engr-in-Charge.

Supply & fix aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

Supply & fix ialuminum anodized barrel tower bolt of extruded section , length of bolt 150mm complete all as specified and directed by Engr-in-Charge.

Supply & fix aluminum handle cast type anodized 150 mm complete all as specified and directed by Engr-in-Charge.

Supply & fix SM butt hinges medium weight cold rolled 100 mm size complete all as specified and directed by Engr-in-Charge.

Material & labour for vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete in all respect complete all as specified and directed by Engr-in-Charge.

Material & labour for 10 litres, cast iron, valveless. syphonic action type, flushing cistern, high level, with inlet, ball valve, float, chain and pull, and bracket complete all as specified and directed by Engr-in-Charge.

Material & labour for seat and cover for pedestal pan complete all as specified and directed by Engr-in-Charge.

Supply & fix flush pipes to pedestal pan, including all joints complete all as specified and directed by Engineer-in-Charge

Supply & fix 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.

Supply & fix hard core of broken stone gauge not exc 63mm deposited speared and leveled in layers not exc 15 cm thick watered and rammed to the surfaces complete all as specified and directed by Engr-in-Charge.

Material & labour for 75mm thick PCC type C-2 1:3:6 (using 40mm graded stone aggregate) finished even and smooth without using extra cement as in sub base or plinth protection complete all as specified and directed by Engr-in-Charge.

Material & labour for 20mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge.

Material & labour for non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.

Material & labour for rendering 10mm thick on fair faces of brick work or concrete surfaces CM 1:4 to receive tiles etc on vertical surface of walls complete all as specified and directed by Engineer-in-charge.

Material & labour for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC connection 15 mm size with PTMT ruts of length 600mm complete all as specified and directed by Engineer-in-Charge.

Supply & fix brass chromium plated tubular towel rail 20 mm dia `D’ type 60 cm long between flanges complete all as specified and directed by Engineer-in-Charge.

Supply & fix CPVC pipes ISI marked with all fittings fixed with solvent cement complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge of following sizes .

20mm bore of pipe

25mm bore of pipe

Supply & fix stop valve 20 mm (ISI marked) cast copper alloy screwd down, high pressure with but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed by Engr-in-Charge.

Supply & fix 15mm dia bib taps, cast copper alloy fancy type chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

Supply & fix brass ball valve high pressure with polyethylene float and ply nut complete screwed for iron pipe or for brass ferrule and fixed bore of pipe 20 mm size complete all as specified and directed by Engr-in-Charge.

Supply & fix PVC (SWR) gulley trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

Supply & fix vitreous china wash basin white, flat back 580x 450 mm excluding taps, waste, chain plug and porcelain stopper incl bracket complete all as specified and directed by Engr-in-Charge.

Material & labour for 32 mm bore waste fitting, brass chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts, flange and bedded in red laid cement and other and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix 15 mm dia fancy type pillar taps, cast copper alloy with capstan head, chromium plated screwed down high pressure, with or without lettered hot or cold with long screw shank and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

Supply & fix grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix cat iron floor trap 75 mm dia, plain with grating including pointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

Supply & fix 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in trenches or floors complete all as specified and directed by Engr-in-Charge.

Supply & fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in trenches or floors complete all as specified and directed by Engr-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed by Engr-in-Charge.

Supply & fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

Supply & fix soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

Supply & fix vitreous china urinal bowl flat back, size of 465x 355 x 265 mm (white) with grating and union for discharge pipe incl providing and fixing plugs, bedding urinal against wall in CM 1:2 , securing urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed by Engr-in-Charge.

Supply & fix angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed by Engineer-in-Charge.

Material & labour for precast cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in cover slabs for man holes and set in CM 1:4 incl necessary form work complete all as specified and directed by Engr-in-Charge. ( Note : Reinforcement steel shall be measured and paid separately)

Material & labour for cement concrete (1:3:6) type C-2 (using 40 mm graded aggregate) as in bed to drain pipe and packing under and haunching against the sides of pipes after they are laid and tested complete pipe size of 200mm bore complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC (SWR) bends 110 mm dia with access door of any radius complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC (SWR) 110 mm dia branch piece, single (single Y) equal or unequal complete all as specified and directed by Engr-in-Charge.

Supply & fix PVC (SWR) 110 mm dia vent cowl complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC (SWR) 'P’ trap 125mm complete all as specified and directed by Engineer-in-Charge.

Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG false ceiling at all heights with GRS( Glass fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS476( Part4)-1970 and light reflectance of 85%(minimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33mm thick( galvanised @ 120 grams per sqm incl both sides) comprising of main T-runners of size 15 x 32mm of length 300mm, cross T of size 15 x 32mm of length 600mm to form grid module of size 600 x 600mm, suspended fromceiling using galvanised mild steel items( galvanising @ 80 grams per sqm) i.e.50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x 25 x 2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm c/c and 40mm long dry wall wood screws complete all as specified and directed by Engineer-in-Charge.

Material & labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI marked drawn concealed with PVC conduit accessories etc including fixed to wall/ceiling including provn of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with and pressed steel terminal box powder coated of suitable size 3mm thick bakelite white/colour sheet top cover ISI marked with brass screws and cup washers for housing switches, sockets, fan regulator, etc complete all as specified and directed by Engineer-in-Charge for the following :-

One light point controlled by one, one way switch single pole piano type

One exhaust point controlled by one, one way switch single pole piano type each

One 3 pin 5 Amps socket out let on same board

Supply & fix switch piano flush type 230/250 Volt, 5 Amps single pole one way etc complete all as specified and directed by Engineer-in-Charge

Supply & fix switch socket combination multi purpose 2 in 1, 5 pin 5 Amps, flush type, ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix ceiling rose surface bakelite 65mm x 50mm three terminal complete all as specified and directed by Engineer-in-Charge.

Supply & fix double door sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 single pole and neutral 8 ways with 200 Amp rated bus bar 240 volts powder coated complete all as specified and directed by Engineer-in-Charge.

Supply & fix isolators/MCBs of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) (Note:- Make of the isolator should be the same as that of DB) complete all as specified and directed by Engineer-in-Charge. for the following:-

SPN 240 volts 40 Amps capacity 'C' series

SP 240 volts 6-40 Amps capacity 'C' series

Supply & fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 W 4 ft indoor decorative with 2 Core copper wire freom ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge

Supply & fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 Core copper wire freom ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge

Supply & fix metal body exhaust fan, AC single phase 230/240V of size 300 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan complete all as specified and directed by Engineer-in-Charge

Material & labour for for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 2.5 Sqmm single core, copper conductor drawn through and including PVC conduit ISI marked with accessories and 2.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed. (Note: Two runs of conductor with one run of earth wire and PVC conduit will be measured & paid as one unit)

Supply & fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, crass section area of size 6 sqmm, 2.0 core for cable laying on wallcomplete all as specified and directed by Engr-in-Charge.

sudarshan builders (BID ID -3460432)

Vijay Construction Co (BID ID -3458336)