Supply, Delivery and Erection of 50HP Stand-by Motor with Pump Set along with necessary accessories at IGMC Stadium Reservoir Booster in Circle-III Area. 1st Call General Funds

Supply and delivery of 50HP 3PH, 1450 RPM Squirel cage induction motor and split casing pump set type UP 150/30B with a discharge of 375 mtr.cube/Hr with a head of 25mtrs, pump size 250 x200mm dia, 1450RPM, efficiency 85% with all CI Construction with bronz impiller of motor and pump Kirloskar/ CG/Texmo/Jyothi make etc., including pump and motor bed frame, couppling set Suitable for Existing including cost and conveyance of all materials etc., complete as directed by the departmental authorities

Supply of 3 Core 25Sqmm flat Copper cable of ISI for submersible motors of makes Finolex / GM / Million / V-Guard / Payal / Nakoda / Gold Medal / HPL / RPG including cost and convayance etc., as directed by the departmental authorities

Supply and Erection of control panel board with suitable size with following -L&T make, ML6 fully automatic star delta starter - 2Nos, current preventer - 2Nos, 250Amps incommer 3 Pole MCCB - 3Nos 63Amps MCB's - 2Nos for capacitors, 2Nos Ammeter, 2Nos 20KVAR Oil cool power capacitors, 2Nos Volt meter, with CT coils, selector switches, 3-Phase indecating lamps, 32Amps DP MCB for lighting control 1No and 3-Phase alumininum busbar, necessary wiring etc., including cost and conveyance of all material charges etc., completed as directed by the departmental authorities

Supply, delivery, fabrication and fixing of MS pipe for suction and delivery line of "ZINDAL" or "TATA" make including cost of specials, coupplings, bends "Tee" etc., including cost and conveyance of all materials labour charges etc., complete as directed by the departmental authorities For 200/250mm dia MS pipe for suction delivery

Cost of MS Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness confirming to IS 7322-1985 and flange dimensions confirming to IS 1538-1993 excluding cost of MS specials including cost and conveyance to site, vat etc., complete as per SS For 200mm dia x 15mm dia thick

Cost of MS Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness confirming to IS 7322-1985 and flange dimensions confirming to IS 1538-1993 excluding cost of MS specials including cost and conveyance to site, vat etc., complete as per SS For 250 mm dia. x 15 mm thick

Supply and delivery of MS bends including cost and conveyance of all materials and labour cahrges etc., complete as directed by the departmental authorities (200mm dia 8mm thick MS bends)

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. For 250mm dia PN-1.60

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. For 200mm dia PN-1.60

Manufacture, Supply and delivery of DI D/F Tilting disc Swing Check Valves Slanted seated with maximum swing of 59 degree with metallic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Shafts of stainless steel, shaft bearing of zinc free bronze and Integral body seat face & disc face with nickel- chromium overlay welding and micro finished. All the inside and outside of the body is to be coated with double coating of food grade epoxy liquid lacquer (EP-F) with minimum thickness of 150 microns, color: RAL 5005 Blue face to face dimensions according to EN 558-1/14/DIN 3202-F4, Flange dimensions according to EN1092-2/IS 1538 For 250mm dia PN-1.60

Manufacture, Supply and delivery of DI D/F Tilting disc Swing Check Valves Slanted seated with maximum swing of 59 degree with metallic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Shafts of stainless steel, shaft bearing of zinc free bronze and Integral body seat face & disc face with nickel- chromium overlay welding and micro finished. All the inside and outside of the body is to be coated with double coating of food grade epoxy liquid lacquer (EP-F) with minimum thickness of 150 microns, color: RAL 5005 Blue face to face dimensions according to EN 558-1/14/DIN 3202-F4, Flange dimensions according to EN1092-2/IS 1538 For 200mm dia PN-1.60

Supply of 70Sqmm 3.50 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification comfirming to IS : 7098 (Part-I) of makes polycab / KEI / Finolex / Havells / Paragon / V-Guard / Gloster including cost and convayance etc., as directed by the departmental authorities

Supply and delivery of bolts and nuts and washers including taxes conveyance etc., complete as per SS (1/2" To 1")

Supply and delivery of 6mm thick rubber packing including taxes and conveyance etc., complete as per SS.

Labour charges for erection of pump set including foundation bed frame and bolts, fabrication, welding, laying charges for pipe line including earth work excavation, electrical connections and trail run etc., complete as directed by the departmenatal authroities