Restoration of Rain damages on various roads of Pragpur Sub Division for Section Pir saluhi (SH Repair to Pot Hole in various road).Section Pir saluhi .

Providing, laying, spreading by mechanically means and compacting to 75mm (seventy five millimeter) compacted thickness, stone aggregates of Grading-III, 53mm to 22.4mm (fifty three to twenty two point four millimeter) size to water bound macadam specification including spreading in uniform thickness, using template, hand packing motor grader, rolling with three wheeled roller 80-100 (eighty to one hundred) kN static weight in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (eleven point two millimetre) nominal size at the rate of 0.18cum (zero point one eight cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Technical specification section 400 and as per entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government.

Repair to pot holes by removal of loose material, trimming of sides, cleaning of surface, then providing tack coat at the rate of 0.300Kg per square meter road surface with bitumen VG-10 followed 20 mm thick compacted pre-mix carpet using 1.46Kg of bitumen VG-10 and 0.027 cubic meter of crushed stone aggregate of proper grading per square meter of road surface mixed and heated to proper temperature in mix-all 6-10 tonne capacity rolled to desired density with 8-10 tonne weight static road roller followed by seal coat IRC type B using 0.68Kg of bitumen VG-10 and 0.006 cubic meter sand per square meter of road surface duly mixed and heated in mixall to the required temperature and property rolled after laying with 8-10 tonne weight static road roller to the desired density as per technical specification Clause 1904.2, direction of the Engineer-in-Charge. including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government.