REPAIR/REPLACEMENT OF WOODEN, STEEL JOINERY, CURTAIN RODS, WIREMESH, GLASS PANE AND MISC WORKS AT DOMESTIC AREA AT AF STATION NALIYA

Amount

Taking down chowkats or frames (without taking of shutter from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.

All as per serial item number 1.00 here-in-before but exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutter of any description not exceeding 1 Sqm each.

All as per serial item number 3.00 here-in-before but exceeding 1 Sqm but not exceeding 2 Sqm each.

Taking down shutter of any description exceeding 2 Sqm but not exceeding 4.00 Sqm each and refixing in same opening after replacing frame complete all as specified and directed. Note :- Frame/chowkats shall be measured & paid separately.

Without taking down shutter of any description not exceeding 1 Sqm and resecuring or easing,repairing & adjusting complete all as specified and directed.

All as per serial item number 6.00 here-in-before but exceeding 1 Sqm and not exceeding 4 Sqm each.

Supply and fix second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and fix second class hard wood 35mm thick glazed and skeleton shutter, open rebated and prepared to receive glass, gauze etc (with out sash bars)including middle stiles overall(top to bottom) , edges of framing plain, chamfered or rounded,fitted with out and retired beads for securing glass etc size of membrane of shutter as specified in SSR part I, Section 8, clause 8.20 (a) and fitted to chowkats complete all as specified and directed.

Supply and fix factory made 35 mm thick plain framed, panelled shutter (two panned/single panel) with lock rail and middle style top to bottom and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The sizes of 2nd class hardwood rail and stiles as per IS 1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix 30 mm thick flush shutters, solid core commercial construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheet reinforced with M.S. square tube ,including taking down old frame with shutter and fittings etc complete all as specified and directed.

Supply and fix 150 mm long aluminium, anodized barrel tower bolts of extruded section complete all as specified and directed (ISI Marked).

All as per serial item number 14.00 here-in-before but 100 mm long (ISI Marked).

Supply and fix in repairs 150 mm long aluminium, anodized barrel tower bolts of extruded section fixed (ISI Marked) complete all as specified and directed.

All as per serial item number 16.00 here-in-before but 100 mm long (ISI Marked).

Supply and fix 300 mm long aluminium alloy, anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed (ISI Marked).

All as per serial item number 18.00 here-in-before but fixed in repair.

Supply and fix 100mm butt hinges stainless steel complete all as specified and directed (ISI Marked).

All as per serial item number 19.00 here-in-before but 75 mm size (ISI Marked).

Supply and fix in repairs 100mm size butt hinges stainless steel complete all as specified and directed (ISI Marked).

Supply and fix in repairs 75mm size butt hinges stainless steel complete all as specified and directed (ISI Marked).

Supply and fix continuous (piano) hinges, mild steel, 30 mm width flaps (when open), bright finish or electro galvanized) complete all as specified and directed (ISI Marked).

Supply and fix 300mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed (ISI Marked).

Supply and fix 150mm extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed (ISI Marked).

Supply and fix in repairs 100mm extruded aluminium alloy handles,fabricated type anodized complete all as specified and directed (ISI Marked)

Supply and fix in repairs 150 mm extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed (ISI Marked).

Supply and fix in repairs 125mm extruded aluminium alloy handles,fabricated type anodized complete all as specified and directed (ISI Marked).

Supply and fix in repairs 100 mm size hasp and staple, aluminium anodised type, stove enamelled black including bolt to hinges plate and fixed with screws complete all as specified and directed.

Supply and fix in repairs floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring, fixed in floor (overall length of cover plate 150mm) complete all as specified and directed.

Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples/wooden beads complete all as specified and directed.

All as per serial item number 31.00 here-in-before but fixed in repair.

Supply and fix mild steel works for hold fasts onforming to Fe-290 Gde-E-165 complete all as specified and directed.

Material and labour for PCC 1:2:4, type B1(using 20 mm graded aggregate) for hold fast complete all as specified and directed.

Material and labour for treating backs of chowkats area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm each complete all as specified and directed.

Material and labour for treating hold fast, small artcle with tar or coal tar black paint area not exceedig 0.1 sqm each complete all as specified and directed.

Dismantling boarding, any description fixed in any position with nails complete all as specified and directed.

Supply and fix 25 mm thick flush shutters, solid core commercial construction with block board core and plywood face panels, commercial type one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

Supply and fix 18/19mm thick pre-laminated particle board, inerior grade, prelaminaed one side wih decorative choice laminaion & other side balancing white lamination lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer complete all as specified and directed.

Supply and fix in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of ild steel heavy duty complete all as specified and directed.

Supply and fix anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing (minimum thickness of powder coating 50 micron) complete all as specified and directed.

Supply and fix powder coated (minimum thickness of polyster powder coating 50 micron) work in approved colour anodised aluminium door shutter, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handle 02 Nos in each door, hinges, anodised aluminium sbap beading screws complete all as specified and direced

Supply and fix powder coated aluminium three track sliding window comprising of one fly proof shutter and two glazed shutters with window frames of size 92mm x 31.63mm x 1.50mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement and with aluminium Deco grill DG/01 7x4.5mm thick, fixed with channel of size 38mm x 12mm x 13mm (Section 8778) complete all as specified and directed. Notes:- (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item. (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and average width of aperture 1.40mm, fixed with aluminium wire staples shall be deemed to be included in the quoted rate for the item. (iii) Glass filling in panels of glazed shutter shall be 5mm thick tinted sheet glass of approved make and shade/ tint shall be deemed to be included in the quoted rate for the item. Make:- (i) Make of powder coated aluminium section : As per Appendix B. (ii) Make of Grill : DECO GRILL or equivalent make as approved by GE.

Supply and fix aluminium (powder coated in approved colour) glazed/ gauzed window shutters with frame, side hung type with sash bars, including necessary joining cleats for fixing etc, glazing clips, rubber packing, aluminium anodised snap beading, screws, aluminium (anodised) fittings such as peg stays 150mm long - 01 No, hooks and eyes - 01 Set, hinge type B-21, 100mm long - 01 No, suitable handle - 01 No, locking device, tower bolts 100mm long - 02 Nos. and glazing panels with 5.5mm thick coloured/ tinted glass with rubber beading, glazing clips and gauzing in with stainless steel wire mesh 0.36mm nominal dia of wire with average 1.40mm width of aperture fixed with aluminium 'C' section, with aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications, complete all as specified and as directed:-

Material & labour for aluminium composite panel sheet of 4 mm thcik which consists of 3mm thick thermoplastic core of anti-toxic LDPE sandwhiched between 2 skins of 0 mm thick aluminium foils with outer surfaces finished with 30 PVDF and inner surface finished with a thin coat of polyster paint, fixed in panel to aluminium frame including all neessary frame work or poder coated snap beading and rubber basket complete all as specified and

Supply and fix aluminum window/ventilator fixed type with two track of section 85.00 mm x 31.75mm 1.50 mm thick section No 78687,24758 shutter of sec 18 x 40 x1.25 mm (Section Number 8663/8664/8665) with rubber gasket beading and locking arrangement including taking down old unserviceable aluminium window/ventilator complete all as specified and directed. Note :-Glass shall be measured and paid separetely.

Supply and fix in repairs aluminum anodised grill of 7 mm dia rod square, rectangular, circular or similar tupe of shape aperture not exc 7.00cm in length or width fixed with H or F channel 38 mm x 12 mm x 1.30 mm (Sec No 8778 complete all as specified and directed. Make -Grill No 20 of Decoare or equivalent.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or metal frame, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oilputty or wooden beads in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

All as per serial item number 52.00 above but figured glass, pin headed type complete all as specified and directed.

Supply and fix tempered or toughened galss 12 mm thickness used for preparing balcony doors, windows, bathroom doors with all necessery fittings complete all as specified and as directed.

Supply and fix in repairs magnate type PVC door stopper 30 to 40mm dia fixed with screw behind the door complete all as specified and as directed.

Supply and fix aluminium (Die cast) body, door closer hydraulically regulated designation No-1, universal type, suitable for door shutters of weight not more than 35 kg complete all as specified and directed.

Supply and fix in repair, aluminium (Die cast) body, door closer hydraulically regulated designation No-1, universal type, suitable for door shutters of weight not more than 35 kg complete all as specified and directed.

Material and labour for repair to aluminium door of size exceeding 1.2 sqm including taking down of aluminium door and refixing in same opening including fixing of 6mm dia bolts with threads overall in top, lock and bottom rail section, floor door spring, dead lock complete all as specified and directed.

Taking down for repair, painting, greasing and maintainence and re-fixing steel shutter of area exc 2 Sqm but not exceeding 4 Sqm including welding, riveting, changing of hinges if required, making good the disturbed surfaces complete all as specified and directed.

Taking down for repair, painting, wood rot, framing molding interior and exterior trim door replacement, porches, rails, maintainence and re-fixing panel door and glazed door or flush door of area exc 1.5 sqm but n exc 4 Sqm including welding, riveting, changing of hinges etc if required, making good the disturbed surfaces complete all as specified and directed.

Supply and fix in repair 25 mm dia stainless steel curtain rod cut to length and fixed incl suitable bracket complete all as specified and directed.

Supply and fix in repair bracket suitable for 25mm dia curtain rod with steel screw/ wooden screw complete all as specified and directed.

Supply and fix in repair framed work such as grills,gratings with ends of bars shouldered and/or riveted,or forged into spikes; ramed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings;including welding, fixing to wall/floor surface etc, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply and fix in repair telescopic channel (heavy duty) of size 300mmx450mm long and roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete for each basket of kitchen cabinet complete all as specified and directed.

Supply and fix Mortice lock 4 lever in aluminium doors complete all as specified and directed.

Supply and fix in repair Mortice lock 4 lever in aluminium doors complete all as specified and directed.

Supply and fix 150mm double action spring hinges, mild steel with steel wire spring, stove enamelled, black all as specified and directed.

Supply and fix in repair 150mm double action spring hinges, mild steel with steel wire spring, stove enamelled, black all as specified and directed.

Welding in repairs not exceeding 2.5 cm in length for exceeding 09 mm not exceeding 20 mm bars all as specified and directed.

Supply and fix in repairs 3mm thick silicon door sealing strip for airgap,water proof shield water resistant weather strip self adhesive door tape for seal, cockroach, bugs, insect stopper seling tape not exceeding 1mtr long complete all as specified and directed.

Dismantliing of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Supply and fix collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets,complete all as specified and directed.

Supply and fix in repairs for steel rolling shutters thickness 1.25 mm, with out ball bearing, as specified including top cover, an choring rod,MS Spring,gear set, hasp and staple and one shop coat of primer;erected in position as indi cated, complete: push pull or manual type including sefety lever locks mild steel with 4 levers for rolling shutter complete all as specified and directed.

Material and labour for preparation of new steel surfaces and applying two coats of sythentic enamel paint over surfaces 10 cm width or girth including one coat of red oxide zinc primer complete all as specified and directed.

Supply and fix in repair 350mm MS spring for rolling shutter complete all as specified and directed.

Supply and fix in repair 450mm MS spring for rolling shutter complete all as specified and directed.

Supply and fix in repair ball bearing of size 50mm inner dia for rolling shutter complete all as specified and directed.

Supply and fix in repair gear set for rolling shutter complete all as specified and directed.

TAKHUBHA KANUBHA JADEJA