SITC of Filtration Equipment Underwater Lighting Equipment and Air Bubbler Equipment including associated Piping Plumbing Electrical Panels and Cabling for Life Support System of Underwater Theming Area and associated GE Work at NMHC Lothal

Price in Words

Life Support System (LSS) Work incl. Associated General Electrical Work of Underwater Theming Area

General Electrical Work other than Underwater Theming Area

In Figure

Rupees Five Crore Six Lakh Eleven Thousand Four Hundred Ninety-Six and Ninety-Two Paise Only.

In Figure

Category

Filtration Equipment

Filtration Equipment

Filtration Equipment

Filtration Equipment

Lighting Equipment

Air Bubblers equipment

Air Bubblers equipment

Filtration Equipment

ITEM DESCRIPTION

Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required Light point for store room / ELV room / office / secuirty cabin (circuit mains ZHFR flexible cable )

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

6 x 4 sq. mm

10 x 4 sq. mm

5/6 A switch

2 way 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1 or 2 Module (65 mmX75 mm)

4 Module (125 mmX75 mm)

Supplying and fixing 3 module GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing 6 module GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet - 2 nos. and 5/6 A modular switch-1 no., connections etc. as required.

Supplying and fixing 8 module GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet - 3 nos. and 5/6 A modular switch-2 no., connections etc. as required.

Supplying and fixing 6 module GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet - 1 nos. and 5/6 A modular switch-4 no., connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing LED fitting, complete with all accessories including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Group-C

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25A modular SP MCB, “C” curve including connections, painting etc. as required.

SITC of 20 A 1 phase 3 pin Thermo Plastic type industrial sockets of IP 67 category with Rotatory Switch complete in thermo plastic encloser . (cost of cable or wiring for the same shall be paid in rmt)

SITC of 32 A 3 phase 5 pin Thermo Plastic type industrial sockets of IP 67 category with Rotatory Switch complete in thermo plastic encloser . (cost of cable or wiring for the same shall be paid in rmt)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way, Double door

16 way, Double door

6 way (4 + 18), Double door

8 way (4 + 24), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (MCB INCOMER)

12 way (4 + 36), Double door

Supplying and fixing 5A to 32A Rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Triple pole

Triple pole and neutral

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A, 415 V “C” curve TP MCB complete with connections, testing and commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.

3 output (1output per phase) and suitable for three phase supply

Supply,installation of hot dip galvanised, heavy duty,Ladder /perforated type cable trays wire mash type cable tray as mentioned below. The work shall be carried out as per the standered practice and as per the guide line given by cable tray manufacturers and to the satisfaction of engineer incharge or consultants.

225 mm width X 50 mm depth X 1.6 mm thickness -WIRE MASH type cable tray

600 mm width X 50 mm depth X 2.0 mm thickness - Ladder type cable tray

CEILING CABLE RACEWAYS (Hot Dipped Galvanized Iron) Supplying and installing following size of Galvanized Iron Ceiling Cable Raceway (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

150 mm width X 38 mm depth X 1.6 mm thickness

100 mm width X 38 mm depth X 1.6 mm thickness

50 mm width X 38 mm depth X 1.6 mm thickness

Supply & making of maintenance free Earthing station with the use of 21/19 MM dia copper ROD ,3M long- ,with 50kg- grounding material (back fill compound with moisture capture capacity and reuse soil) resistivity - scope includes supply of electrod/ back fill compund / labour charges fo bore of 200- 3.5 mtrs depth/making earth chember with 450 mm x 450 mm x CI / FRP cover Installation detail - making 3.5 m depth bore - 100 mm fill with chemical compund paste / put electrode in centre of bore / fill up balance space of bore with chemical compund / balck cotton soil ( if avilable ) paste - carefull for no air gap in paste , ALSO CHECK WITH ELECTRODE / COMPOUND MANUFACTURE FOR INSTALLATION DETAIL TO ACHIVE LESS THEN 1 OHM

Supply & making of maintenance free Earthing station with the use of 25mm dia copper bonded (250 micron) ,3M long- ,with 50kg- grounding material (back fill compound with moisture capture capacity and reuse soil) resistivity - scope includes supply of electrod/ back fill compund / labour charges fo bore of 200mm- 3.5 mtrs depth/making earth chember with 450 mm x 450 mm x CI / FRP cover Installation detail - making 3.5 m depth bore - 100 mm fill with chemical compund paste / put electrode in centre of bore / fill up balance space of bore with chemical compund / balck cotton soil ( if avilable ) paste - carefull for no air gap in paste , ALSO CHECK WITH ELECTRODE / COMPUND MANUFACTURE FOR INSTALLATION DETAIL TO ACHIVE LESS THEN 1 OHM

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying and laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.

Equipotential Bars- SCOPE OF RSUPPLY & INSTALLATION WITH 40 MM 11000 VOLT INSULATOR / ANCHOR BOLT/FASHNER , TOOLS

Equipotential bars - 300 x 50 x 6 mm GI.

Equipotential bars - 150 x 50 x 6 mm copper

Equipotential bars - 200 x 50 x 6 mm GI.

Supply of following sizes 11 KV Earthed XLPE insulated aluminium conductor armoured cable conforming to IS : 7098 complete as required. - 3C X 300 sq.mm (AL.)

Supply of following size of 1.1KV grade multicore Aluminium / copper conductor XLPE insulated & PVC sheathed armoured power cable as per IS: 7098 (Part-1) 1988 complete as required. 1.1 KV L.T.CABLE (XLPE)

4C X 240 sq. mm (62mm) (AL.)

4C X 185 sq. 'mm (AL.)

4C X 35 sq. mm (AL.)

4C X 25 sq. mm (AL.)

4C X 6 sq. mm (Cu)

4C X 4 sq. mm (Cu)

4C X 2.5 sq. mm (Cu)

3C X 6 sq. mm (Cu)

3C X 4 sq. mm (Cu)

3C X 2.5 sq. mm (Cu)

3C X 4 sq. mm (Cu) ZERO HALOGEN FLAME RETARDANT FLEXIBLE CABLE

3C X 2.5 sq. mm (Cu) ZERO HALOGEN FLAME RETARDANT FLEXIBLE CABLE

3C X 1.5 sq. mm (Cu) ZERO HALOGEN FLAME RETARDANT FLEXIBLE CABLE

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Above 120 sq. mm and upto 400 sq. mm

Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 11 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

Above 120 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/HUME/ METAL pipe as required.

Above 120 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.

Above 120 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size

3 core, XLPE aluminium conductor cable of 11 KV grade as required 300sq. mm

Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size

3 core, XLPE aluminium conductor cable of 11 KV grade as required 300 sq. mm

4C X 240 sq. mm (62mm) (AL.)

4C X 185 sq. 'mm (AL.)

4C X 35 sq. mm (AL.)

4C X 25 sq. mm (AL.)

4C X 4 sq. mm (Cu)

4C X 2.5 sq. mm (Cu)

3C X 6 sq. mm (Cu)

3C X 4 sq. mm (Cu)

3C X 2.5 sq. mm (Cu)

3C X 4 sq. mm (Cu) ZERO HALOGEN FLAME RETARDANT FLEXIBLE CABLE

3C X 2.5 sq. mm (Cu) ZERO HALOGEN FLAME RETARDANT FLEXIBLE CABLE

3C X 1.5 sq. mm (Cu) ZERO HALOGEN FLAME RETARDANT FLEXIBLE CABLE

SUPPLY AND INSTALLTION OF STRUCTURAL STEEL FOR SUPPORTS FOR TRAY, PDB, MCC, CAPACITOR BANKS / D.G. Ex. Piping ETC. The job includes supply of structural steel for supports cable tray panel base frames, all types of supports or brackets from mild steel angle, channels, flats, details given from MS flat / angle / plates etc complete with 2 coats of red oxide and 2 coats of silver paint on the same along with mounting of supports with use of necessary hardwares complete.

SUPPLY AND INSTALLTION OF Moduler STEEL FOR SUPPORTS FOR TRAY, MCBDB ETC. The job includes supply of Modular steel for supports ( 41 x 21 mm / 41 x 41 mm /'Z' section for cable tray & MCBDB / wall mounting Panel , all types of supports or brackets should be moduler type with complete with 2 coats of red oxide and 2 coats of silver paint on the same along with mounting of supports with use of necessary hardwares complete.

Supplying , Installation, Testing & Commissioning of Passive Infrared (PIR) technology based occupancy sensor with day light dimming (lighting level shall be regulated as per availability of natural day light in an area along with occupancy detection.) having high preformance, regulating programmable type, suitable for connected load upto 10 A, for mounting height up to 2.8 meter and for 5 meter diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.

150 mm dia

300 mm dia

Providing & laying UPVC pressure pipes of 10Kg/Sq.cm pressure rating class V (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing - 40mm Dia

-do as above but 50 mm dia.

120 mm dia (OD-120 mm & ID-103 mm nominal)

SITC of IP 65 category Thermo Plastic Material junction boxes with necessary loop in loop out connectors / busbars / internal wiring if required etc. complete. The boxes if required shall be mounted on 9" MS supports which shall be considered in cost.rate considering terminal require up 35 sqmm cable - ampproved make - HENSAL / SECHME / SPELSBERG- SIZE TO BE CHECK WITH VENDOR - NEAR SIZE TO BE CONSIDERING & MENTION IN OFFER

Excavation of cable trench of suitable size depending upon the Nos. of cables to be laid in average soil and refiling of cable trench after laying of cable including watering and removing supply earth..(For HT.cable - 1200 mm depth & for L.T. Cable 1000 mm depth) for HT. CABLE )

Supplying & installation of HALF ROUND HUME PIPE 150 MM at the top through out the length

Supplying & filling of clean river sand.200 mm

Supplying & installation of cable route markers (H.T /L.T)

Design, supply, Installation, testing,and commissioning of LT panels for the Lothal Water Body Project comprising Main Filtration Panel with 800A TPN aluminium busbar, 800A 4P MCCB incomer (36kA, LSIG protection), MFM with RS485 and 800/5A CTs, along with outgoing feeders consisting of 4 Nos. 200A 4P MCCBs (25kA) for Pump Rooms 1 to 4, 1 No. 63A 4P MCB (spare), 1 No. 125A 4P MCCB (spare) and 1 No. 200A 4P MCCB (spare) for a connected load of 440 kW.