CA NO. CWE/HILLS/RKT/35 OF 2025-2026 REPAIR TO CERTAIN MISC B/R EXTERNAL SERVICES AT KAUSANI MIL STN UNDER GE RANIKHET

Amount

Demolition of brick masonry/precast block/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excl ashlars facing,dressed stone work and pre-cast concrete articles complete all as specified & directed by Engr-in-charge

M&L precast cement concrete 1:3:6 type C1(using 20 mm graded stone agg) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.

M&L for raised pointing to block in course or ashlar masonry or concrete block walling in Cement mortar1:4 as specified by Engr-in-Charge and as directed

Taking down cement / lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed

M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement including mixing only water proofing compound as per manufacturer instruction on external wall complete. Note:- WPC will be measured & Paid separately

Supply only integral water proofing compound

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment , plastered or un-plastered surfaces of walls and applying two coats of cement base paint white or tinted over a coat of primer complete all as specified and directed.

Dismantaling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with ‘L’ type or ‘J’ type or cranked hook bolts with bitumen washer in roof or wall and making good Complete all as specified and directed.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified & directed.

Dismantling mild steel or wrought iron work in roof trusses,gratings etc and similar work complete all as directed

M&L Mild steel work in framed work such as grills, gratings, guard bars, doors etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290.Gde-E-165, complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness(below or above ground level) complete all as specified and directed.

M&L for Providing cement concrete type B-2, 1:2:4 (using 40mm graded aggregate) as in surface channel and drains complete all as specified & directed by Engr-in-charge

Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as specified and directed. concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc all as specified and directed.

M&L for 100 mm thick plan cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in hardstanding,path, flooring surface finished even & smooth using extra cement complete all as specified & directed by Engr-in-charge.

M&L for 75mm thick plain cement concrete type C-2 1:3:6 type (using 40mm graded stone aggregate) in sub base to floors and paving etc all complete all as directed by Engr-in-charge

M&L for Chequered cement concrete tiles size 20cm x 20cm x 25mm thick,set,jointed and pointed in neat cement slurry in floors with mixture of grey cement and pigment over and including 15 mm thick screed bed or bedding in CM (1:6) for laying floor finishes complete all as specified & directed

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping /kerb/Side of chequered tiling etc.including weathering and throating including necessary form work etc.complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Cement concrete type D-2 1:4:8 (40mm graded aggregate) in foundations, filling,sub base and mass concrete complete all as specified & directed by Engr-in-charge.

M&L for Sand filling under interlocking tiles or in foundations including watering and consolidation complete all as specified & directed by Engr-in-charge.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified by Engr-in-charge.

Joshi Constructions (BID ID -3349027)