Construction of ESR, UGR along with laying of pipeline including other ancillary work in Khariar Road NAC

Construction of R.C.C Reservoir/ R.C.C ESR Supplying all materials, labour, T& P including design, construction, testing & commisioning of R.C.C Reservoir/ R.C.C ESR and piping arrangement up to 5.0 Running meter from external face, Raft/Pile foundation & Shaft/Column staging including all work such as soil investigation, earth work in excavation, back filling & disposal of earth, RCC & PCC of required grade, centering and shuttering, brick work, painting, finishing, connection pipes valves fitting, expansion joint, mechanical level indicator etc with lead of all materials to site as per the site requirement and as directed by the Engineer-in- Charge

Proposed ESR Zone-5 (700 KL) (25 mtr. Ht.)

Proposed UGR Zone-5 (500 KL).

Supplying all materials, labour, T & P for filling sand in foundation and plinth, well watered and rammed with cost, conveyance, taxes, lead of all materials to site

Supplying all materials, labour, T&P for fitting & fixing, testing & commissioning of 3 Tonne Capacity EOT Crane, Approx span :12 m, Type – Suspended, Worm / Spur gear, Range of lifting – 0 to 8 m, Load Chain – Alloy steel for single Girder with support as per IS 3109 / 6216, Hand Chain – IS 2429 / BS 6405 including installation, testing & commissioning with lead of all materials to site. Zone - 2, 5, 6 & 7

Supplying all materials, labour, T&P and Design & Construction of Sunken Pump House (Size - 6.0 M x 5.0 M x 4.0 M Height) at Zone - 2, 5, 6 & 7 Site with R.C.C pillar, R.C.C Beam, Lintel, Chajja, roof slab, Fly ash brick work in C.M (1:6), Cement plaster & painting works with lead of all materials to site. (The height of roof slab should not be less than 4.0 mtr from plinth level).

Laying of CWRM Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Cutting concrete road of granular course of flexible pavments and disposal of dismantelled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Supplying all labour, T&P and earth work excavation in following kinds of soil within initial laed of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges & labour cess etc, as per direction of Engineer-in-charge

Supply of all labour, T&P for laying of K9 & K7 Class Ductile Iron Socket & Spigot Pressure Pipes in standard length with internal cement mortar lining and external bituminous coating conforming to IS 8329:2000 and its subsequent amendments & ISI Marked SB/EPDM Rubber Gasket (IS:5382) for Push-on type Flexible Joints of DI Pipes,including inspection, transportation, handling, loading, unloading, stacking, etc. all complete as per specification and direction of Engineer-in-charge.

150mm dia DI (K7)

250mm dia DI (K9)

300mm dia DI (K9)

Supplying all materials, labour and T&P for providing, laying, fixing & testing of D.I/C.I Specials, Bends, etc. in trenches confirming to IS: 1538 all complete as per specification and direction of Engineer-in-charge including supplying of all labour, material, T&P required to perform to work. (excluding earth work)

Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete .

150mm diameter

250mm diameter

300mm diameter

Supplying all materials, labour and T&P for providing, laying, fixing & testing of DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60 (IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) for Installation/ Replacement of Sluice Valve in Existing Water Supply Pipe Line & Newly Proposed Pipeline for controlling flow & scouring Purpose.

150mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)

250mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)

300mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)

Sluice Valve Laying Cost

150mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)

250mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)

300mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)

Supplying all materials, labour and T&P for providing, laying, fitting-fixing & testing of Tamper Proof Kinetic Air Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast iron pipes with metal straps) as per specification complete

50mm dia Tamper Proof Kinetic Double Air Valve

80mm dia Tamper Proof Kinetic Double Air Valve

Supplying all materials, labour and T&P for constructing brick masonry Sluice Valve Chamber of size (.9mx.9mx1.5m) as per P.H. specification and design all complete including RCC Cover Slab (per each) Construction

Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.

150mm dia M.S.Pipe (4.50mm thick)

150mm dia M.S. Flange.(12mm thick)

150mm dia x 45' M.S. Bend

250mm dia M.S.Pipe (6.30mm thick)

250mm dia M.S. Flange.(12mm thick)

250mm dia x 90' M.S. Bend

250mm dia M.S. Flange Joint

300mm dia M.S.Pipe (7.10mm thick)

300mm dia M.S. Flange.(12mm thick)

Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete

Welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.

Supplying all materials, labour, T&P and filling in pipe line trenches with sand well watered and rammed including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc all complete as per specifiation and direction of Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40cm size crusher broken black hard granite metal including watering, curing, conveyance of all materials to work site, payment of royalty & labour cess etc all complete as per specifications and direction of Engineer-in-charge.(Mending the C.C Road)

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as per the direction of Engineer-in-charge.

Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.

Supplying all materials, labour, T&P and providing RCC M20 grade Thrust Block including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as per the direction of Engineer-in-charge.

Construction of RCC Thrust Block of size 1.0 x 1.0 x 1.0 m

Construction of RCC Thrust Block of size 1.50 x 1.50 x 1.30m

NH Crossing

Supplying all material, labour, T&P for crossing of M.S pipe line across NH by Horizonal Trust boring/pushing method (in slope of 1 in 40 towards downstream including encasing the 300mm dia Carrier Pipe line by 500 mm dia Casing Pipe including excavation of Push pit, dewatering if any, laying & jointing of casing & carrier pipe, capping & sealing casing pipe, spacer etc. for carrier pipe & installation of sign boards on either side of railway track (BS 105 GUIDELINES ON PIPELINE CROSSING UNDER NH/SH) & direction of Engineer-in-charge & approved by Railway Department etc. all complete. 500 mm Dia

Supplying all material, labour, T&P for crossing of M.S pipes of all classes conforming to IS:3601 of the following outer diameter with internal grit blasted to Sa 2.5 to ISO 8501-1 following by 500-700 micron two component 100% solid solvent free liquid epoxy coating all complete as per AWWA-210-07 and direction of Engineer-in-charge including supplying of all labour, material, tools & plants required to perform the work 500 mm Dia 6.3mm Thickness

Supplying all material, labour, T&P for crossing of M.S pipes of all classes conforming to IS:3601 of the following outer diameter with internal grit blasted to Sa 2.5 to ISO 8501-1 following by 500-700 micron two component 100% solid solvent free liquid epoxy coating all complete as per AWWA-210-07 and direction of Engineer-in-charge including supplying of all labour, material, tools & plants required to perform the work 300mm Dia 5.6 mm Thickness

Supplying all materials, labour and T&P for Providing and fixing High Density Polyethyiene Spacers Betwwen Casing and Carrier pipe to avoied Contact 2.5 m c/c all complete as per Specification (BS 105: Guideline on Pipeline Crossing Under NH/SH and Direction of EIC (80/2)+1=41

Railway Crossing

Supplying all material, labour, T&P for crossing of M.S pipe line across Railway line by Horizonal Trust boring/pushing method (in slope of 1 in 40 towards downstream including encasing the 250mm dia Carrier Pipe line by 500 mm dia Casing Pipe including excavation of Push pit, dewatering if any, laying & jointing of casing & carrier pipe, capping & sealing casing pipe, spacer etc. for carrier pipe & installation of sign boards on either side of railway track (BS 105 GUIDELINES ON PIPELINE CROSSING UNDER RAILWAY LINE) & direction of Engineer-in-charge & approved by Railway Department etc. all complete. 500 mm Dia

Supplying all material, labour, T&P for crossing of M.S pipes of all classes conforming to IS:3601 of the following outer diameter with internal grit blasted to Sa 2.5 to ISO 8501-1 following by 500-700 micron two component 100% solid solvent free liquid epoxy coating all complete as per AWWA-210-07 and direction of Engineer-in-charge including supplying of all labour, material, tools & plants required to perform the work 500 mm Dia 6.3mm Thickness

Supplying all material, labour, T&P for crossing of M.S pipes of all classes conforming to IS:3601 of the following outer diameter with internal grit blasted to Sa 2.5 to ISO 8501-1 following by 500-700 micron two component 100% solid solvent free liquid epoxy coating all complete as per AWWA-210-07 and direction of Engineer-in-charge including supplying of all labour, material, tools & plants required to perform the work 250mm Dia 6.3 mm Thickness

Supplying all materials, labour and T&P for Providing and fixing High Density Polyethyiene Spacers Betwwen Casing and Carrier pipe to avoied Contact 2.5 m c/c all complete as per Specification (BS 105: Guideline on Pipeline Crossing Under Railway Line and Direction of EIC (80/2)+1=41

House Service Connection Supplying all materials, Labour & T&P for providing New House connections to beneficiaries from PHE Deptt./ WATCO CI/ DI pipe line to the property of beneficiaries/ Repair of House connection with extension of service etc. including earth work excavation, cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damaged road with CC (1:2:4) after completition of the work, lifting of excess excavated materials/ debrises from work site & disposing within 5 KM radious by mechanical transport, fixing 1/8" dia brass/ GM ferrule with following dia. composite Strap Saddle in the CI/DI pipe line, cutting holes in brick/ stone/ RCC masonary work, repair the broken holes, cost of uPVC Schedule - 80 pipe (25 mm / 20 mm dia up to 7.0mtr /10 mtr respectively ) & fittings, 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of Engineer - in- Charge.

With 100mm dia distribution main

With 150mm dia distribution main

Supplying all materials Labour & T & P for fitting & fixing of 20mm dia MDPE pipe (10kgf/cm2) with compression fittings for connection with ferrule & uPVC service pipe of different diameter to make the connection leak proof including cost of required length of 20mm dia MDPE pipe up to 1.0 mtr ,both side elbow/Female threaded elbow/Male threaded elbow/Both side adopter/Male threaded adoptor/ Female threaded adoptor etc.complete as per site condition & ditrection of Engineer in charge.

Supplying all Labour,T&P and laying in trenches ASTM (Sch-80)PVC pipes & fittings of the following nominal bore including testing as per P.H specification except earth work as per direction of Engineer-in charge

25mm dia PVC pipe(Sch-80)

Replace/Refix damaged Ferrules

Laying of Distribution Network Supplying all labour, T&P and Cutting asphalt or bituminous of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge.

Supplying all labour, T&P and Cutting Concrete road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge.

Supplying all labour, T&P and earth work excavation in following kinds of soil within initial lead of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges & labour cess etc, as per direction of Engineer-in-charge.

Supply all labour & T&P for Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete.

100mm dia DI (K7)

150mm dia DI (K7)

200mm dia DI (K7)

250mm dia DI (K7)

Supplying & laying of Ductile Iron fittings & Specials confirming to IS Specification including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.

Construction of Thrust Block of RCC M-20 with surface reinforcement.(1.00 x 1.00 x 1.00m) (for100mm to 400mm size pipe)

Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete. (Labour Only)

100mm diameter

150mm diameter

200mm diameter

250mm diameter

Supplying all material, labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.

100mm dia M.S.Pipe (4 mm thick)

100mm dia M.S. Flange.(12mm thick)

100mm dia x 90' M.S. Bend

100mm dia M.S. Flange Joint

150mm dia M.S.Pipe (4.5 mm thick)

150mm dia M.S. Flange.(12mm thick)

150mm dia x 90' M.S. Bend

150mm dia M.S. Flange Joint

200mm dia M.S.Pipe (6.30mm thick)

200mm dia M.S. Flange.(12mm thick)

200mm dia x 90' M.S. Bend

200mm dia M.S. Flange Joint

250mm dia M.S.Pipe (6.30mm thick)

250mm dia M.S. Flange.(12mm thick)

250mm dia x 90' M.S. Bend

250mm dia M.S. Flange Joint

Supplying all labour and T&P for cutting of following dia MS pipe of following thicknesss in trenches by Flame cutting set of pocket etc all complete.

Welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site

Supplying all materials, labour and T&P for providing, laying, fitting-fixing & testing of DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves)

100mm dia

150mm dia

200mm dia

250mm dia

Laying Cost 100mm dia

Laying Cost 150mm dia

Laying Cost 200mm dia

Laying Cost 250mm dia

Supplying all materials, labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab (per each) Construction of brick masonry sluice valve Chamber of size (0.9x.9x1.5mtr) Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.

Filling in foundation and plinth with sand watered and rammed including cost of sand & labour.

Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .

Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as per the direction of Engineer-in-charge.

Removing & re-fixing of precast cement concrete interlocking paving blocks of all sizes over 50 mm thick course sand bedding (duly compacted) including filling of joints with sand complete in all respect.

Providing Supplying, fitting and fixing of 80mm thick interlock concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand. including cutting corbelling, splays wherever necessary to proper size with cost, conveyance, royalties and taxes of all materials and cost of all labour, etc. complete in all respect as directed by Engineer in charge.

Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.

Supply installation of globe valve OS & Y type rising spindle bolted bonnet with parabolic disc for manual flow control Moc - ASTM 216 Gr WCB SS410 disc nut stem and back sheet bush with handle wheel and nut flanged end with pilot threaded bore on both flange for pressure gauge attachment etc all complete as per the direction of Engineer-in-charge.

Valve Cost 100mm dia

Valve Cost 150mm dia

Laying Cost 100mm dia

Laying Cost 150mm dia

Cutting of CI /DI Pipe by eletric arc welding at site including cost of materials, labour, T&P etc., with earthwork in excavation for automization purposes, all complete as directed by Engineer In-charge

CC Approach Road at ESR Site - 50 Mtrs Supplying all materials, labour, T&P and filling with sand well watered and rammered including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc all complete as per specifiation and direction of Engineer-in-charge.

Construction of granular sub-base by providing Coarse graded Grading-II material as per Table 400-2, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works.(Latest Revision)

P.C.C.(1:3:6) in foundation & plith using 40 mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete in all respecte as per Scope & Technical Specification & direction of Engineer-in-Charge.

Supplying all materials, labour, T&P and providing cement concrete M-30 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete etc. all complete as per the direction of Engineer-in-charge.

Boundary Wall - 150 Mtrs Supplying all labour, T&P and Earthwork in excavation in Stony earth and gravels mixed with stone & boulders not exceeding 0.014 cum in volume with in 50mtr. Initial lead & 1.50m. initial lift including rough dressing, breaking clods & laying in layers not exceeding 0.30m In depth, leveling the bed & including sundries, supervision charges, contractor profit & labour cess etc, & as per the direction of engineer- in-charge.

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc, all complete as per specification and direction of Engineer-in-charge.

Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision conveyance of all materials to worksite, payment of royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.

Supplying all labour, materials, T&P and providing Cement concrete M20 Concrete with crusher broken hard granite chips on 12mm size RCC works including cost of conveyance & royalty, sundries, watering, curing & lifting & laying concrete at a height of 5 mtr. Maximum, contractor profit & labour cess etc all complete etc all complete (Excluding cost of reinforcement & centering & shuttering)

Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.

Column Base, Plint Beam, Beam etc

Column

Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and laying the grill and position including cost of binding wire 18 to 20 gauge, conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and Providing Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strength not Less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar(1:6 ) in S/S including cost of conveyance & royalty, sundries & watering for curing & supervision charges, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge.

Supplying all materials, labour, T&P and making 12mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of engineer-in-charge.

Supplying all materials, labour, T&P and making 16mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of engineer-in-charge.

Supplying all materials, labour, T&P and filling of foundation and plinth with excavated materials with all kinds of soil as per the direction of engineer-in-charge.

Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge. (on Plastered surface)

Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge

Pillar and Gate (2 Sets at ESR & UGR Site) Supplying all labour, T&P and Earthwork in excavation in Stony earth and gravels mixed with stone & boulders not exceeding 0.014 cum in volume with in 50mtr. Initial lead & 1.50m. initial lift including rough dressing, breaking clods & laying in layers not exceeding 0.30m In depth, leveling the bed & including sundries, supervision charges, contractor profit & labour cess etc, & as per the direction of engineer- in-charge.

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc, all complete as per specification and direction of Engineer-in-charge.

Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision conveyance of all materials to worksite, payment of royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.

Supplying all labour, materials, T&P and providing Cement concrete (1:1½ :3) with crusher broken hard granite chips on 12mm size RCC works including cost of conveyance & royalty, sundries, watering, curing &lifting & laying concrete at a height of 5 mtr. Maximum, contractor profit & labour cess etc all complete etc all complete (Excluding cost of reinforcement & centering & shuttering)

Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.

Column Base up to plinth

Column

Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and laying the grill and position including cost of binding wire 18 to 20 gauge, conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge (SAIL STEEL TMT-EQR 500/IS 1786 Fe 500 D)

6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment

Supplying all materials, labour, T&P and filling of foundation and plinth with excavated materials with all kinds of soil as per the direction of engineer-in-charge.

Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge. (on Plastered surface)

Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge

Supplying all materials, labour, T&P and Fitting & Fixing of SS Gate including cost of conveyance, brushes, sundries, contractor profit & labour cess etc., all complete as per the direction of Engineer-in-charge

2 Leaf SS Gate (Size 6.0 M x 1.8 M Ht.) @ 30 KG/Sqm

1 Leaf SS Gate (Size 1.3 M x 1.8 M Ht.) @ 30 KG/Sqm

Centrifugal Pump Set Providing, erecting and giving test of Centrifugal Pump Set conforming to IS 9079 operating at 2900 RPM with Bronze impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type. Pump set shall be suitable for working at Discharge 24 LPS and Head 34 mtr requirements. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block. (Required capacity of Pump Sets to be calculated as per above Head & Discharge - (1W+1S) 2 nos. at Zone-5 Pump House)

VFD compatible Control Panel: Supplying all materials, labour, t&p and fixing of PLC Compatable ATV 930 VFD (Required capacity of VFD to be calculated to run the above capacity of 2 Nos. Centrifugal Pumps), HEAVY DUTY 16AMP, WITH BREAKING UNIT VFD floor mounted Control Panel made out of 2MMC. Powder coated sheet & alluminium Bus Barinter connected with copper wire and lugsh having 50KA -125A MCCB including spreader link and extended ROM-1No, RYB indicator -1set, digital ammeter- 1 No, digital volt meter- 1No, 4A control all complete as per direction of Engineer-in-Charge.

Supplying all materials labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.

100mm dia M.S.Pipe (4 mm thick)

100mm dia M.S. Flange.(12mm thick)

100mm dia x 90' M.S. Bend

100mm dia M.S. Flange Joint

150mm dia M.S.Pipe (4.5 mm thick)

150mm dia M.S. Flange.(12mm thick)

150mm dia x 90' M.S. Bend

150mm dia M.S. Flange Joint

200mm dia M.S.Pipe (6.30mm thick)

200mm dia M.S. Flange.(12mm thick)

200mm dia x 90' M.S. Bend

200mm dia M.S. Flange Joint

250mm dia M.S.Pipe (6.30mm thick)

250mm dia M.S. Flange.(12mm thick)

250mm dia x 90' M.S. Bend

250mm dia M.S. Flange Joint

Supplying all labour and T&P for cutting of following dia MS pipe of 8mm thick in treanches by Flame cutting set of pocket etc all complete

Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set of pocket etc all complete

Supplying all materials Labour & T & P for Fixing Ductile Iron Sluice Valve / NR Valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve .

150mm dia D/F Sluice Valve (PN1.6)

150 MM NRV

Earthing: Supply, installation of chemical earthing with crystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all complete as per the site requirement.

Supply installation testing & commissioning of Float Control valve to the fixed in UGR/OGR to shutup the incoming flow after filled up the reservoir & open automatically when water receeds in a particular level etc. complete as per direction of Engineer in charge.

150 mm dia

200mm dia -

250mm dia -

300mm dia -

Internal & External Electrification Supplying, fitting, & fixing of 11 kv Line with 160x160 mm 11 Mtr. Height GI Pole with all required accessories

Supplying, installation , testing and commissioning of 63 KVA 11/0.4 transformer for pump house at Zone - 05 with Online Automatic Voltage Regulator

Supply, installation, and commissioning of a 25 KVA (CPCB IV+) LT diesel generator with an AMF control panel, ensuring reliable power backup. This includes the provision and laying of Suitable copper armoured cable for electrical connectivity from the generator to the LT panel, complete with proper terminations and earthing. Additionally, a weatherproof DG shed will be constructed to house the generator, with adequate ventilation, exhaust provisions, and a robust foundation. All installations will comply with local regulations, and final approval will be secured through an electrical inspection by the department. This project ensures a complete, efficient, and safe setup for power backup as per specifiation and direction of Engineer-in-charge.

Supplying all materials, labour T&P for complete installation and commissioning of sub-station structure as per OERC guideline

Proposed Pump House Internal Electrification (Zone-2,5,6&7) Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth with lead of all materials to site.( Polycab / Havels / V Guard )

Light point Group A

Light point Group B

Recessed wiring for light / power plug with 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 1.5 sq.mm F.R.P insulated single core multistrand copper conductor for loop earthing with lead of all materials to site..

Supplying all materials, labour, t&p and cutting grooves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification.

Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire .

Supplying all materials, labour, t &p and laying 2.24mm dia copper bare copper wire as running earth and testing with lead of all materials to site.

Supplying all materials, t&p for providing Earthing with G.I earth pipe 2.5 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required with lead of all materials to site.

Instrumentation Work at Distribution Site HDPE PIPE: Supply and Laying of 40MM dia HDPE pipe (Make: Supreme/ equvalent) in cable trench or buried as per specification and directions of Site Engineer / Engineer-in-Charge.

Supply, Installation and commissioning of Control cables to be inserted in conduit pipe in trenches, cables to be laid in racks, cleated on walls, cable lugs, cables glands, conduits, cablejoints Screened cable unarmoured etc all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge.

CAT-6 Dlink cable

Supply and installation of MS pipe including required numbers of bends and flanges and dismentaling joint etc required for installation of control units (i.e- Globe valve, flow meter, PG, PT etc.) and fiber cover over the arrangement fixing on CC(1:3:6) platform including cost of all materials, labour for fitting and fixing etc. all complete.as per site requirement and as per the direction of the engineer in charge.( excluding cost of Sluice valve, flow meter, PG, PT.)

Supply with fitting and fixing of of D.I. Mechanical Dismantling Joints for use to main uninterrupted water supply in the pipeline in case of repair of Flow meter as per specification and direction of Enginer - in - charge

CONTROL ROOM PLC for ESR/Hill Top OGR and Distribution system OPERATION: Supply all material, labour T&P for installation & testing commissioning of PLC System of appropriate capacity & sufficient provision of digital & analog input and output to rum the plant & machineries within the campus limit, with minimum 20% spare cards, being operated locally at ESR campus, with provision of PLC operation (On & Off) of feed pump with respective Chlorine analyzer with an architecture of maintaining water quality in distribution pipeline at identified location. Complete operation of the feed pump depends upon the water quality communicated via point to point (P2P) signal from the remote analyzer unit to main PLC. Provision should be there for LIVE data communication (by agency) between the PLC panels through FO Cable for the operation (on & off) of clear water Well Pumps as per the water requirement . Local data storing facility should be there and for monitoring and analysis as per the user needs and report generation. (The Cost is inclusive of cost of materials, installation & successful commissioning etc) The PLC & all necessaries shall be of high standard make all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge. (Schneider/ Siemens/ Rockwell).

Supply, Installation, Testing, Intgeration & Commissioning of 49" LCD monitor at Conf. Room for display of total water system (Online) complete as per specification and directions of Site Engineer /Engineer-in-Charge.

Supply,Installation & Commissioning of SCADA software (Make-Schiender/Simens/Rockwell) and cost for development of 24x7 distribution management system software, with Graphical processor visualisation Advanced alarm management, historical and Real time trending, Built-in-reporting, Stastical process control, Multithreaded citect VBA and Cicode programming language including installations of Desk top PC, Modem for receiving data etc all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge

Supplying,Installation & testing of 4G/5G Dual Sim LTE Router with 1 X LAN, 1 X WAN, RS485 on board with one at a time usage, WI-FI (802.11 b / g / n), 1 X Cellular Antenna, 1 X WIFI Antenna, Model- SW245 (RS485) Make- SWTPL and comlpeted as per Ingineering_In-Charge.

Supply, Installation and commissioning of single phase 1KVA online UPS with pure sine wave & float cum boost charging with battery rack and maintenance free battery system including cables power plug, switch having application in 24V lot DC Battery (drytype) charging to output continuous 3 hrs power backup all Complete Works and all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge

Supply, Installation and commissioning of Control cables to be inserted in conduit pipe in trenches, cables to be laid in racks, cleated on walls, cable lugs, cables glands, conduits, cablejoints etc. as per specification. all Complete Works Screened cable unarmoured and comlpeted as per Ingineering_In-Charge. (Make:- Finolex/L&T/Anchor/Havells/V-Guard/Equivalent Make with approval of the Authority)

1.5 sqmm 4 C CU AR Shielded Cable

1.5 sqmm 2 CU AR Shielded Cable

Instrument Cable- 2 Pair 1.5 mm2 cable

Supply and delivery of Actuator control sluice valve of PN 1.6 with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof . Fitting and fixing of sluice valves with tail pieces, nesaceery rubber packing, SS 204 nut bolt including labour, T&P, transportation to site from store and fixing the surface boxes with electric actuator resistant to high pressure and robust design, torque 7-2000 Nm, motion range 0-360°, voltage 220V AC, applicable for actuating multi-turn valves, with Case Body, Opening Mete, Inlet Wire Lock, Rubber Cover of Handle Shaft, No-Bracket Installation, Gear Box Cover, Electric Cover, Wiring Cover, Handle Shaft Cover, Output Shaft & Adapter and completed as per specification and directions of Site Engineer / Engineer-in-Charge.

Supplying, Fitting, fixing & Commissioning of The body PN-16 and cover will be ASTM A536 Ductile lion can be integrated with PLC panel for operation with a minimum pressure in upstream 0.2 kglcm2 to a maximum pressure of 8 kglcm2. The valve seat shall be a solid, one-piece SS-316 desian and shall have a minimum five-degree taper on the se ating surf ace for a positive , drip-tight shut off. The diaphragm assembly shall contain a self-cleaning S5-303 stainless steel stem of sufficient diameter to withstand high hydraulic pressure differentials and shallbe fully guided atits both ends by a bearing in the main valve cover and an integral bearing in the valve seat, in order to be pr actically in balance along its fullift for limiting encessive friction, thus incre asing its ability to react when performing a correction. The diaphragm shall not be usedias the seating surface and it shall be fully supported by machined surfaces of the valve body or cover in its closed or opened position. In operating position, its inactive surface shall be completely supported for securing its maximum longevity. The control willbe achieved by, operating 2 number Solenoid Valves mounted on the main Valve. The Connecting tubing on the Main Valve willbe SS with |SS fiting from reputed companies makes. The flexible tubing on Main valves will not be allowed. of the approved make:(Make- KROHNE, MARSHAL, LIE&HIAB, BISIEMENS/ Equivalent make with approval of authority) to control water supply, including cost of material with alltaxes transporatation to sitelstorage with insurance.

Providing, installation, testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass, Over range protection: 125% of maximum pressure, Material of sensor and other wetted parts: SS type 316, Housing material: Die cast aluminum with linear scale and all complete as per the direction of Engineer-in-charge.

Pressure Transmitter :Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement along with snubber and needle valve, 1.0 sq.mm 2 core copper braided screen cable Wire, screw, grip & clamp for DI / MS pipe fitting. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED Accuracy - +/- 0.1 % of full scaleor better Enclosure- IP 68 and all complete as per the direction of Engineer-in-charge.

Supplying all materials Labour & T&P for Fixing of DI tamper proof Kinatic Air Valve P.N 1.0 for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Air valve and isolation valve all complete and as per the direction of Engineer-in-charge.

50 mm dia

Supply, installation, testing & commissioning of Online Chlorine Analyser with following technical specification. i.e.Single Channel free Chlorine Analyser, FRC sensor with 10 feet cable (with manual PH compensetion), Complete system pre mounted on plate with FTC sensors, Power supply110-240VAC, Transmitter wall /Panel mount type, Range FRC-0-10 ppm, Complete plate mounted system, (The Analyzer must be pre wired on plate,we will provide only power supply & pipe connection system) and all complete as per the direction of Engineer-in-charge. (Make - Forbes Marshall/Tethys/Horiba/Hach)

Supplying all materials, labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab (chamber internal size:-[3.00x2.00x1.50mtr] for SCADA Instrumentation) and all complete as per the direction of Engineer-in-charge

Designing, Supplying, Installing, commissioning & testing of Ultrasonic level transmitter CE marked with following technical parameters Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext.,Display - 4" LED ,Range- 0-10 mtr - 20 mtr.,Accuracy - +/- 0.25% of Full Scale or better ,Enclosure- IP 68 ,Mounting - On PLC panel at ESR/UGR and all complete as per the direction of Engineer-in-charge

Supply & installation of full-bore type electromagnetic water flow meter at various locations for monitoring volume of water flow, with following technical specification: Drinking Water Application, Liner:- Hard rubber, Process Connection:- PN10, St37-2/FE 410W B, flange EN1092, Electrodes:- 1.4435/3161, Calibration: 0.5%, Approval: Nonhazardous area Housing Field Alu, Sensor IP68 NEMA6P, Cable, Remote Version: 20 m coll and signal cable, Power Supply: 20-28VDC /11-40VDC Display: 2-line, push buttons, all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge Make- KROHNE MARSHALL, E&H, ADEPT, ABB, SIEMENS

150 mm dia

200 mm dia

250mm dia

300mm dia

Supply, Installation, Testing and commissioning of Chlorine Dosing machine incluiding laying of pvc pipe interconnection with main waterline, Chemical storage and handling equipment etc. 0-500 Lph Zeroleakge pneumatic diapharm dosing pump - 2nos, one primary and one standby mode, pressure upto-10bar, 1000 Ltr Chemical tank capacity. Agitator motor - 1nos, strainer, NRV on Pump Outlet, Electrically actute Flow control Valve with PLC compatible VFD Panel for dosing pump and agitator etc. transportation & packaging including cost of materials, all labours, T&P etc. all complete as per the direction of Engineer-in-charge.

Earthing: Providing Electrical system system's earthing as per latest IS 3043, and the work shall include the following: Earthing electrodes comprising of GI pipe 40mm dia 2.9 mm thick 2.5 mtrs long with mesh covered funnel. Digging 300mm dia earthing pits to suitable depth for buring the main electrodes in the pit. The pit shall be filled with alternate layers of salt and charcoal 150mm thick around the pipe to the entire depth. An inspection chamber of 300x300x300mm size shall be constructed with CC 1:3:6 prop. The chamber shall be provided with CI/MS cover hinged to the frame. The Electrical Metering & switching , encloser electrical equipment shall be connected to the earth pit through 4 Sqmm Cu (green) for equipment/PLC earthiing.

Supplying all materials, labour, t&p and fixing of PLC Compatable ATV930-VFD, HEAVY DUTY 16AMP, WITH BREAKING UNIT VFD floor mounted with Control Panel made out of 2MM C.R Powder coated sheet & alluminium Bus Barinter connected with copper wire and lugsh having 50KA-125A MCCB including spreader link and extended ROM-1 No, RY B indicator- 1set, digital ammeter- 1No digital volt meter- 1No, 4A control all complete as per specification and the direction of Engineer-in-charge.

upto 15 KW(Zone-2&6)

upto 22 KW(Zone-3,4&7)

upto 37 KW(Zone-1&8)

Design, Drawing and Construction of RCC frame structure with brickwork wall single storied building (Master Control Center System Room, Electrical System Room with Toilet) for SCADA control room with Toilet block and Laboratory at MBR site, complete as per the direction of Engineer-in-charge. (Size 40M x 7M) Supply of all material, labour, T&P for PH work and Electrification Work and chairtable, almera, etc of SCADA controlroom, complete as per the direction of Engineer-in-charge

O&M for 5 (Five) Years

Please Enable Macros to View BoQ information