Dutibagar G.O.V Pumping Water Supply Scheme Didihat

Rates Dutibagar pumping W/S Scheme

Intake Well

Excavation of earth for foundation In soil mixed 75 % of total

In medium rock 25 % of total

Dewatering during excavation up to minimum water level pumping of 16 hrs per day including cost of diesel,labour etc complete.(3PumpsX4 MonthX8 hours)

R.C.C. 1:1.5:3 Raft

R.C.C. 1:1.5:3 slab of pump house

Ist Class Brick Work in Superstructure in 1:6

R.C.C. (Lintel) 1:1.5:3

12 mm thick P.C. plaster 1:6

Supply fixing of door, Window, Steel Ladder & Railling

Supply fixing of girder, chain pully for lifting of pumps from well

R.C.C. 1:2:4 slab in Balcony

Supply fixing of 15 m beam to rest on floor and wall of pump house 8 mm thick MS plate in level including supply of all materials labour T&P etc required for proper completion of work

150 mm dia. Cast steel Reflux / Swing Check Valve, Class 150

Supply & fixing of Nuts & Bolts to fix casing size of bolts 30mm dia & 30 cm long

Supply & fixing of 200 mm dia sluice valve

P.C.C. 1:2:4 for installation of water pumps.

M.S. work for R.C.C. work 1.25 % of

Snowcem painting two coat on in intake well & pump house

One coat white washing & two coat distemper in pump house

Diverson Of River

Excavation in soil mixed with singleboulders with lift up to 1.50 m &lead up to 3 m including filling and ramming of excavated earth & removal of surplus aerth up to a distance of 60 m to divert river. in soil mixed with single boulder.

in medium rock.

Making coffer dam of sand bags including supply of / sand, labour T&P complete. Requirment of sand filling for coffer dam

Providing and laying of Empty Cement Bags ( Gunny Bags) filled with local sand and tightened using sutli and carriage upto site including preparing subgrade before placing in position, also including supply of all material, labour, T&P etc required for proper completion of the work.

Dismentling of coffer dam afer completion of work (5X5X 324)

Filter Plant Treatment Plant

Supply of all materials, labours,T&P etc and all the equipment to construct 1 MLD capacity rapid gravity treatment plant consisting of two equal units of presedimentation tank, mixing unit,flocculation unit ,hopper bottom setteling tanks,rapid sand filter of two equal units 0.5 mld each with alum doser & Back wash arrangement

Detailed Survey Design, Planning & Drawing for 1 MLD treatment plant @ 2.75 % On Total Estimate Of treatment Plant

Inflation Charges 8 Year @ 3% Per Year

Cartage @ 1% For every 10 Km On total Cost for 125 KM(22.5%)

Provision For Boundary wall or such other work all round the stations for preventing approach of unauthorised souls At FILTER PLANT

As per unit Estimate

Provision of P.C.C. (1:4:8) with cement,sand 40 mm guage stone ballast in foundation including supply of all material labour T & P etc.

Protection works of the above items as per site requirement R.R. 1:6 Stone masonary

Bridge 12 M Excavation of earth in soil mixed with shingle and boulders including lift up to 1.5 m and lead upto 30m including back filling of excavated earth, watering, ramming of excavated earth into space between the building and plinth & removal and disposal of surplus earth upto 60m distance from the foundation trenches.

Providing concrete for plain/ reinforced concrete in open foundations complete as perb drawings and technical specifications Clause 802, 803, 1202 & 1203 (P.C.C grade M 10) (Nominal mix 1:3:6) (For Bridge & Culvert)

Providing concrete for plain/ reinforced concrete in open foundations complete as perb drawings and technical specifications Clause 802, 803, 1202 & 1203 ( R.C.C grade M 25) (For Bridge & Culvert)

Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructruer complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202. (The reinforcement steel shall be procured from original (primary) steel producers as per clause no. 2011.3.1 of MORD specifications (First Revision'2014) and IS1786:2008 clause no. 1.6) (For Bridge & Culvert)

Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows duly painted on medium weight steel channels (ISMC series) 100 mm x 50 mm, 1.2 m high above ground, 2 m centre-to-centre, complete as per approved drawings Clause 1706

Gravity Main

Providing of all materials, carting from site store to site of work, laying & jointing of G.I. screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc.) in trenches with its cutting, threading and testing of pipe line etc complete. 25mm dia

32 mm dia

40mm dia

50mm dia

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete. 80mm dia 4.8 mm Thick

Excavation of earth for pipe line in following strata lift upto 1.5m. Lead upto 30m. Including refilling,watering,ramming of excavated earth into the trenches and removal of surplus earth upto adistance of 60m. Fromtrenches including supply of labour,T&P.etc complete.Assuming that 90%pipe line is laid in trenches ,it is estimated that 75% exavation will be in soil mixed with shingle,bajri&boulders and rest 25%will be in soft rock Soil mixed with boulder and bajri

25mm dia

32mm dia

40mm dia

80mm dia

High Head Cast Iron Air Valve 80mm TP-10kg/Sqm

80mm TP-10kg/Sqm

Construct gate valve chamber as per type design complete.

Construct air valve chamber as per type design complete.

Supply of all materials, labour, T & P etc. and Construction of R.C.C Anchor Block @ 50 m interval as per type design complete

Makig 2 M wide Briddle path for rising main including hill side cutting and coolie walling of all materials, labour, T & P etc.

Beldar for site clearence work& other unforseen items

Supply of all materials, labour, T&P etc and construction of R.C.C. Sump / CWR of following capacities (KL) with M.S. ladder outside & inside of the tank, M.S.M.H. cover with locking arrangement, supply and fixing of chlorinator, cowl,outlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2 . 5.00KL Top CWR Earth Work

M.S Iron Work

Supply fixing & Removal Including Cartege Of M.S Suttering For Slab

For Wall & Raft

P.C.C 1:2:4 Apron

Wash out & Overflow 32mm Dia

Inlet & Outlet 25mm Dia

Painting Outer Wall

Painting Of Slab Area

Painting In Steel Main Hole Cover(Both side)Black Japan Paint

Main Hole Cover

5.00KL Top CWR

Earth Work

M.S Iron Work

Supply fixing & Removal Including Cartege Of M.S Suttering For Slab

For Wall & Raft

P.C.C 1:2:4 Apron

Wash out & Overflow 32mm Dia

Inlet & Outlet 25mm Dia

Painting Outer Wall

Painting Of Slab Area

Painting In Steel Main Hole Cover(Both side)Black Japan Paint

Main Hole Cover

10.00KL Top CWR

Earth Work

M.S Iron Work

Supply fixing & Removal Including Cartege Of M.S Suttering For Slab

For Wall & Raft

P.C.C 1:2:4 Apron

Wash out & Overflow 40mm Dia

Inlet & Outlet 40mm Dia

Painting Outer Wall

Painting Of Slab Area

Painting In Steel Main Hole Cover(Both side)Black Japan Paint

Main Hole Cover 22.50KL Top CWR

Earth Work

M.S Iron Work

Supply fixing & Removal Including Cartege Of M.S Suttering For Slab

For Wall & Raft

P.C.C 1:2:4 Apron

Wash out & Overflow 40mm Dia

Inlet & Outlet 40mm Dia

Painting Outer Wall

Painting Of Slab Area

Painting In Steel Main Hole Cover(Both side)Black Japan Paint

M.S angle Ladder

Main Hole Cover

40.00KL Top CWR Earth Work

M.S Iron Work

Supply fixing & Removal Including Cartege Of M.S Suttering For Slab

For Wall & Raft

P.C.C 1:2:4 Apron

Wash out & Overflow 65mm Dia

Inlet & Outlet 50mm Dia

Painting Outer Wall

Painting Of Slab Area

Painting In Steel Main Hole Cover(Both side)Black Japan Paint

M.S angle Ladder

Main Hole Cover

40.00KL Top CWR Earth Work

M.S Iron Work

Supply fixing & Removal Including Cartege Of M.S Suttering For Slab

For Wall & Raft

P.C.C 1:2:4 Apron

Wash out & Overflow 65mm Dia

Inlet & Outlet 50mm Dia

Painting Outer Wall

Painting Of Slab Area

Painting In Steel Main Hole Cover(Both side)Black Japan Paint

M.S angle Ladder

Main Hole Cover

50.00KL Top CWR Earth Work

M.S Iron Work

Supply fixing & Removal Including Cartege Of M.S Suttering For Slab

For Wall & Raft

P.C.C 1:2:4 Apron

Wash out & Overflow 65mm Dia

Inlet & Outlet 50mm Dia

Painting Outer Wall

Painting Of Slab Area

Painting In Steel Main Hole Cover(Both side)Black Japan Paint

M.S angle Ladder

Main Hole Cover

Supply and installation of bucket type chlorinator of 25 liters capacity including bleeching powder solution doser,chloroscope kit with stop cock & iron cage fabricated with 25mm x 25mm square mesh with locking arrangements below dozer to protect flexible pipe connection with CWR complete with all arrangements in position.

Protection works

Excavation in ordinary soil mixed with single, boulder requiring special T&P like pickaxe, crowbar etc. for foundation including lift upto 1.5 m. and Lead upto 30 m. Including refilling, watering, ramming of excavated earth into the trenches or space between the sides of foundation trenches or in to the plinth and removal and disposal of surplus earth upto a distance of 60 m. from trenches nearby sources, along the pipe line

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

RR stone masonary with 1:6 cement and sand mortar nearby sources and along the pipe line for proper completion of work.

Beldar for Site clearance and other unforeseen items

Distribution System

Providing of all materials, carting from site store to site of work, laying & jointing of G.I. screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc.) in trenches with its cutting, threading and testing of pipe line etc complete. G.I. Medium quality 15mm dia

20mm dia

25mm dia

Excavation of earth for pipe line in following strata lift upto 1.5m. Lead upto 30m. Including refilling,watering,ramming of excavated earth into the trenches and removal of surplus earth upto adistance of 60m. Fromtrenches including supply of labour,T&P.etc complete.Assuming that 90%pipe line is laid in trenches ,it is estimated that 75% exavation will be in soil mixed with shingle,bajri&boulders and rest 25%will be in soft rock Soil mixed with boulder and bajri

Soft rock

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Cross Wall

Excavation of earth in foundation in soil mixed with shingle, bajri etc., including lift upto 1.5 m and lead upto 50 m. filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus earth upto a distance of 50m. from the centre of the foundation trenches, incl. labour, T&P etc. all complete. In soil mixed with boulders 75%

In Soft rock 25%

P.C.C. in 1:4:8 with cement, local sand and 40mm gauge stone ballast including supply of material, labour, T&P etc. for proper completion of work.

R.C.C. in stabs, 1:1.5:3 with cement, coarse sand & 20 mm gauge stone ballast but excluding supply of reinforcement and its bending but including its fixing and binding the same with .5mm thick binding wire and including necessary centering and shuttering and including supply of all material, labour, T&P for proper completion of work. Foundation

Mild steel or iron work in plain work such as R.C.C. work wrought to required shape including supply of steel & its bending.

Add Beldar for Site clearance.

Pump House

Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Diluting and injecting chemical emulsion (chlorpyriphos/Lindane E.C 20% with 1% concentration) at the rate of one litre per hole at 300 mm c/c to all the horizontal and vertical surface of the excavation made for the foundation of the building, soil under floor,apron, back fill material and along all the faces of the walls for PRE-CONSTRUCTIONAL anti-termite treatment (including the cost of chemical emulsion) as per IS:6313 Part-II. (Plinth area of building shall be measurd for payment.)

Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

REINFORCED CEMENT CONCRETE

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.T.M.T

Centring and shuttering including strutting,ropping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Slab beams,& plinth beams

Suspended floors, roofs, landings, balconies and access platform.

BRICK WORK

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).

Brick work with F.P.S. bricks of class designation 75 in superstructure

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with dash fastener or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and all members such as K11 B and K12 B etc.complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required

Fixing glass panes, with putty and nails wherever necessary 4 MM thick

WOOD WORK

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.)

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 250x10 mm

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper

STEEL WORK

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete

FLOORING

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) 40 mm thick finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.

6 mm cement plaster 1:3 (1 cement: 3 fine sand) on ceiling

12 mm thick cement plaster in 1:6 ( 1 cement and 6 fine sand) mortar including supply of all material , labour and T&P etc. required for proper completion of the work.

15 mm cement plaster on rough side of single or half brick wall of mix 1: 4 (1 cement: 4 fine sand)

White washing with lime to give an even shade: New work (three or more coats)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (New work (two or more coats) over and including priming coat with cement primer)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

Excavation for foundation in Soil mixed with boulders

RR Stone Masonry 1:6 including supply of all materials, labour, T&P etc. complete

Staff Quarter

Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Diluting and injecting chemical emulsion (chlorpyriphos/Lindane E.C 20% with 1% concentration) at the rate of one litre per hole at 300 mm c/c to all the horizontal and vertical surface of the excavation made for the foundation of the building, soil under floor,apron, back fill material and along all the faces of the walls for PRE-CONSTRUCTIONAL anti-termite treatment (including the cost of chemical emulsion) as per IS:6313 Part-II. (Plinth area of building shall be measurd for payment.)

Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete.

CONCRETES WORK

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

REINFORCED CEMENT CONCRETE

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.T.M.T

Centring and shuttering including strutting,ropping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Slab beams,& plinth beams

Suspended floors, roofs, landings, balconies and access platform.

BRICK WORK

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).

Brick work with F.P.S. bricks of class designation 75 in superstructure Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing T-iron frames for doors, windows and ventilators of mild steelTee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs andscrews or rawl plugs and screws or with dash fastener or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and all members such as K11 B and K12 B etc.complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required

Fixing glass panes, with putty and nails wherever necessary 4 MM thick

WOOD WORK

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.)

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 250x10 mm

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper

STEEL WORK

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

FLOORING

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) 40 mm thick finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

FINISHING

12 mm thick cement plaster in 1:6 ( 1 cement and 6 fine sand) mortar including supply of all material , labour and T&P etc. required for proper completion of the work.

6 mm cement plaster 1:3 (1 cement: 3 fine sand) on ceiling

15 mm cement plaster on rough side of single or half brick wall of mix 1: 4 (1 cement: 4 fine sand)

White washing with lime to give an even shade: New work (three or more coats)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (New work (two or more coats) over and including priming coat with cement primer)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

Excavation for foundation in Soil mixed with boulders

RR Stone Masonry 1:6 including supply of all materials, labour, T&P etc. complete

Providing & Fixing of Electical Fitting in Quarters

Sanitary & Draining

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 Kitchen sink with drain board 510x1040 mm bowl depth 225mm.

SOIL PIPE

Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729

75 mm dia. Sand cast iron S&S pipe as per IS: 1729

SOAP DISH

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

CLAMPS

Providing and fixing M.S holder-bat clamps of approved design to PVC/Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. For 100 mm dia pipe

For 75 mm dia pipe

BENDS

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100 mm diameter pipe

75 mm diameter pipe

Providing and fixing plain bend of required degree wbolts and nuts complete 100 mm diameter pipe

75 mm diameter pipe

COLLER (FOR SOIL PIPE)

Providing and fixing collar : P.V.C. 100mm

P.V.C. as per IS - 3989 75 mm

Drainage

Excavating trenches of required width for pipes, cables, etc including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil and then returning the soil as required, in layers not exceeding20 cm in depth including consolidating each deposited layer by ramming, watering, etc.and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars150mmdia. R.C.C. pipe

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :150 mm diameter S.W. pipe

Providing and fixing square-mouth S.W. gully trap grade ‘A” complete with C.I. 100x100 mm size P type With F.P.S. Bricks class designation 75

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for manholes Size 90x80 cm With F.P.S brick class designation 75

Water Supply Work G.I.PIPE

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore

G.I.UNION

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

BIB COCK

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931)

LONG BODY BIB COCK

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

STOP COCK

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approvedquality .(15 mm nominal bore)

BALL VLAVE

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore

NON RETURN VALVE

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal

TERRACE TANK

Providing and placing on terrace (at all floor levels) polyethylene water storage litre tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

PWD Road Cutting

Provision for the payment to PWD for Road Cutting & Reinstatement Charge (B.M/SDBC road) Supply Main

Misllinous Work

Painting of MS ERW/API Pipes with 2 coats of approved quality. (Anti-Corrosive paint over one coat of Primer) (Dia of pipe in mm)

Provision of Barbed Wire Fencing through angle iron posts around the water works site Proposed at MPS ,IPS &Top CWR

Provision of Iron Gate with Pillars of following sizes complete 3.6 m wide

Provision of Drainage System consisting of following works Mainhole chambers

Supply & laying of drainage 250 mm dia. RCC NP2 pipe

Supply of all materials and construct 150 mm S.C. drain including supply of all labour T&P etc complete

PUMPING MACHINERY AT INTAKE WELL

Supply of multistage centrifugal pump with bronze impellers, stainless steel shaft capable to deliver clear water 175 LPM discharge at 95 Mt. head

Supply of horizontal shaft TEFC electric motors suitable for above pump

M.S. fabricated base plate and coupling for above pump set

Motor Starter cum panel suitable for above pump set ( SCADA compatible)

Control panel-one incoming two out going

Supply of power wiring material such as16 sq.mm. 3 Core copper conductor cable XLPE insulated cable

Supply of power wiring material such as 70 sq.mm.3½ Core aluminum conductor cable XLPE insulated, cable

Jointing material for wiring connection including lugs, thimble, insulation tapes, nutt bolts etc.

Suitable foundation for above pump set

earthing of all electrical equipments with supply of material such as G.I. earth strip, earth plate, G.I. funnel, charcoal, Salt, watering pipe etc. including digging of pitsand refilling complete..

Main piping & valves comprising of the followings :-100 mm suction and 100 mm delivery

Pressure gauges

Supply of lifting tackle with H.O.T gantry crane 2 Ton 6 m span capacity with 4.5 mtr. lift chain complete.

HT Panel

HT AI Cable

Tools

Rubber Insulation sheet 2.01m x1.0m x 25mm thick.

Installation of all pumping plants

Commissioning of pumping plant at site.

Testing of pumps. At works.

At Site.

Painting

PUMPING MACHINERY AT (MPS)

Supply of multistage centrifugal pump with bronze impellers, stainless steel shaft capable to deliver clear water 175 LPM discharge at 410 Mt. head

Supply of horizontal shaft TEFC electric motors suitable for above pump

M.S. fabricated base plate and coupling for above pump set

Motor Starter cum panel suitable for above pump set ( SCADA compatible)

Control panel-one incoming two out going

Supply of power wiring material such as16 sq.mm. 3 Core copper conductor cable XLPE insulated cable

Supply of power wiring material such as 70 sq.mm.3½ Core aluminum conductor cable XLPE insulated, cable

Jointing material for wiring connection including lugs, thimble, insulation tapes, nutt bolts etc.

Suitable foundation for above pump set

earthing of all electrical equipments with supply of material such as G.I. earth strip, earth plate, G.I. funnel, charcoal, Salt, watering pipe etc. including digging of pitsand refilling complete.

Main piping & valves comprising of the followings :-80 mm suction and 80 mm delivery

Pressure gauges

Supply of lifting tackle with H.O.T gantry crane 2 Ton 6 m span capacity with 4.5 mtr. lift chain complete.

HT Panel

HT AI Cable

Tools

Rubber Insulation sheet 2.01m x1.0m x 25mm thick.

Installation of all pumping plants

Commissioning of pumping plant at site.

Testing of pumps. At works.

At Site.

Painting

PUMPING MACHINERY AT (IPS)

Supply of multistage centrifugal pump with bronze impellers, stainless steel shaft capable to deliver clear water 175 LPM discharge at 350 Mt. head

Supply of horizontal shaft TEFC electric motors suitable for above pump

M.S. fabricated base plate and coupling for above pump set

Motor Starter cum panel suitable for above pump set ( SCADA compatible)

Control panel-one incoming two out going

Supply of power wiring material such as16 sq.mm. 3 Core copper conductor cable XLPE insulated cable

Supply of power wiring material such as 70 sq.mm.3½ Core aluminum conductor cable XLPE insulated, cable

Jointing material for wiring connection including lugs, thimble, insulation tapes, nutt bolts etc.

Suitable foundation for above pump set

earthing of all electrical equipments with supply of material such as G.I. earth strip, earth plate, G.I. funnel, charcoal, Salt, watering pipe etc. including digging of pitsand refilling complete.

Main piping & valves comprising of the followings :-80 mm suction and 80 mm delivery

Pressure gauges

Supply of lifting tackle with H.O.T gantry crane 2 Ton 6 m span capacity with 4.5 mtr. lift chain complete.

HT Panel

HT AI Cable

Tools

Rubber Insulation sheet 2.01m x1.0m x 25mm thick.

Installation of all pumping plants

Commissioning of pumping plant at site.

Testing of pumps. At works.

At Site.

Painting

INTERNAL ELECTRIFICATION WORK (TYPE-1) SUB HEAD - I SCHEDULED ITEMS WIRING WGSTLPT Point wiring in PVC conduit, with piano type switch.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C

WGSTLMIDTC Twin Control point wiring in PVC conduit, with piano type switch:

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

WGSTLPP2 Power plug wiring in PVC conduit (2x4 sq. mm)

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

WGSTLSB Circuit/ submain wiring in PVC conduit:

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x1.5 sq. mm + 1x1.5 sq.mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

PVCCON S/F PVC conduit:

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm

PTSWEB S/F piano type switch/ socket:

Supplying and fixing following piano type switch/ socket on the existing switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

3 pin 5/6 amp socket outlet

MODFREB S/F modular type electronic fan regulator:

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

LPACCPT S/F light plug point piano type accessories:

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

PPACCPT S/F power plug point piano type accessories:

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required..

CREB S/F ceilling rose:

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

BRHOLD S/F brass holder:

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

ITCFFSUR ITC fluorescent fitting directly on surface:

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

ITCCFFC ITC ceiling fan:

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

ITCEF450 ITC exhaust fan upto 450 mm sweep:

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep

LOUSHEF Fixing louvers/shutters for exhaust fan:

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

BOARD & DB'S PWSPMCBDB S/F Pre-wired SP MCB DB:

Supplying and fixing following way, single pole and neutral, prewired, sheet steel MCB distribution board, 240 volts, on surface/ recess, complete with loose wire box, terminal blocks, tinned copper busbar, neutral link, earth bar, din bar, detachable gland, interconnections, including powder coat painting, earthing etc. as required. ( But withoutMCB/RCCB/ lsolator) 8 way single door

MCBC S/F 'C' curve, SP MCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

MCBDPIS S/F DP MCB isolator:

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

EARTHING SUB HEAD - II (NON SCHEDULED/EXTRA ITEMS) CEILLING FAN

Supply of AC 230/250 volts, 50 HZ energy efficient ceiling fan with standard down rod, blades, 2 nos. caps etc. complete (Make : Bajaj /Compton / Havells) 1200 mm sweep

Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. completeModel- Ventil Air - DS (Make : Bajaj /Compton / Havells) 300 mm sweep 900 rpm

SUPPLY OF LED Glass Bulb B22, 12 W ,6000k /4000k/3000K ,230/250 Volt,50 HZ ETC, complete in all aspects as per direction of Engineer in Charge.

Supply and fixing of T5 LEDTube Light -Wall mounted LED batten , extruded aluminium Heat sink provided for efficient heat dissipation & integrated electronic driver. (1X22W LED )complete in all aspects as per direction of Engineer in Charge