Laying of Three Single core 11KV XLPE 185 sq.mm. Cable on elevated PSC structure and through HDPE pipe at Indo-Pak Border under Khavda Sub-Division of Bhuj Division under Bhuj Circle. (Package 10, Feeder 4, BOP 1045 to BOP 1041).

Estimate for laying 11KV XLPE cable on elevated structure - Bhuj Division

Package 10, Feeder 4, BOP 1045 to BOP 1041 - Feeder

Length 5.14 KM Total Conn:

Schedule -1: Supply of Material

PARTICULARS UNIT QTY Rate AMOUNT

OUTDOOR No. 8 2625.00

KIT: HT push on/heat

shrink type end

preferably 3m(m-seal)

or Raychem make at

transformer(PAD/Pole

mounted) for 11 kV

XLPE single core

Conductor Armoured

cable as specified with

connection of leads

including cutting,

stripping of cable,

insulations, providing

compression type

terminals, crimping of

lugs with suitable

tool for outdoor

application. (set for

Signature and Round Seal of TkC

G:STRAIGHT JOINT No 10 6515.00

KIT: HT push on/heat

shrink type straight

preferably 3m(m-seal)

or Raychem make for

11 kV XLPE single

Sq mm Aluminium

Conductor Armoured

cable as specified

with connection of

leads including

cutting, stripping of

insulations, providing

compression type

terminals, crimping of

with suitable crimping

tool.(set for 3 core)

Pre-fabricated Set 1686 1000.00

galvanised steel items

for fastening HDPE

structure, as per

technical specification,

approved drawings

and scope of work

including galvanized

steel Nut & Bolt as per

technical specification

& GTP. Fastening

clamp set of hot dip

GI angle (65X65X6)

and hot dip flat

(50X6) with GI nut-

thickness >50m(Set of

2 angles, 2 clamps, six

Signature and Round Seal of TkC

Supply, Installation, Meter 200 324.00

Commissioning of

RCC Round pipe (6

inch dia, 1 inch thick)

for laying of cable for

crossing of road.

Florescent Danger NO 1686 8.00

Sticker of 4"X4" PVC

Cost of supply excluding GST

18% GST on supply cost

Schedule 1 Total Cost of supply including GST

Schedule - 2: Installation/Erection charges

PARTICULARS UNIT QTY Rate AMOUNT

Erection of PSC NO 1686 350.00

structure by digging

pit of depth of 3' -

with fixing of clamp

Laying of 11KV Meter 5140 300.00

XLPE cable through

HDPE 140mm/160mm

thickness and fixing it

on PSC structure and

clamping it. Fixing

ends of pipe by Butt

Fusion as per ISO

21307. Fixing danger

sticker on pipe at the

interval of 10 feet.

PVC Cable terminal

identification of phase

sequence shall be

provided at every

termination and

Signature and Round Seal of TkC

CONCRETING OF CMT 303 8452.00

PSC structure WITH

MATERIAL(1:2:4)

3'6" - 75mm concrete

at bottom before

structure - Water

cement ratio <0.4 -

CMT per structure

Rs. 1991 per structure

Laying of under Meter 60 503.00

ground cable at road

crossing through

employing manual

push and pull method

for crossing the road.

Installation of Coil No. 24 763.00

type Earthing consist

of (a) 8 SWG GI wire

for earthing coil-

Kg (b) Rigid PVC

Pipe -20mm dia (

Earthing Bolt- 1 No

(d) GI Wire No.

From Pole Top to

Kg including cost of

Coal Salt etc. (20 KG

COAL) using existing

earthing pit as per

approved drawings,

specifications and

Signature and Round Seal of TkC

Obtaining statutory LS 1 16000

Electrical Inspector

for installation,

commissioning and

charging of the

Installation charges excluding GST

18% GST on installation cost

Schedule 2 Total Installation charges including GST

Total cost excluding GST

Material likeConcrete, Danger stickers, water, Salt, Charcoal, 11kv Outdoor

Cable Box, 11kv Straight Through Joint,GI Clamp & Fasteners set for fixing

of pipe, buff joint, Flange adapter, RCC pipeand all necessary materials, for

erection and commissioning of network as per drawing & necessary Tools-

Only Below Mentioned Materials are supplied by PGVCL

Sr. Name of Material

1 PSC structure

2 HDPE pipe 140 / 160 mm

3 single-Core 11KV XLPE 185mm2 Cable

4 GI wire for earthing

Signature and Round Seal of TkC