PROVN OF SANITARY BLOCK AT BHUJ, PROVN 1 X EQPT ROOM, 02 x TOILET BLOCK AND 02 X BATHROOM AT KHAVDA UNDER GE ARMY BHUJ

Amount

Lump Sum price worked out by the contractor for the building works as listed in Sch 'A'Part-I ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the SITE CLEARANCE, EXCAVATION AND EARTHWORKS as listed in Sch 'A'Part-II (Except building section, earthing to electricity and valve chamber) ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the HARDSTANDING/PATH works as listed in Sch 'A'Part-III ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the SEWAGE DISPOSAL works as listed in Sch 'A'Part-IV ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the EXTERNAL WATER SUPPLY works as listed in Sch 'A'Part-V ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the EXTERNAL ELECTRIFICATION works as listed in Sch 'A'Part-VI ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the INTERNAL WATER SUPPLY works as listed in Sch 'A'Part-VII ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the INTERNAL ELECTRIFICATION, development works and earth work for all sections works as listed in Sch 'A'Part-VIII ( Refer Pre priced schedule attached separately)

Schedule 'A' Part-IX- Miscellaneous Items (PROVN OF 02 x TOILET BLOCK AND 02 X BATHROOM AT KHAVDA) Note No. 01 : This schedule is not prepriced by MES and the estimated rate indicated as blank under column F signifies that only) Note No. 02: Bidders are required quote their rates for this schedule.

Excavation in trenches not exceeding 1.5 m wide & not exceeding 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil all as specified & as directed.

Material and labour for Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed

Removing excavated material not exceeding 50m depositing where directed at a level not exceeding 1.5 m above the starting point all as specified & as directed

Material and labour for returning filling including spreading levelling watering and well ramming in layers not exceeding 25cm in any soft and loose soil all as specified & as directed.

Material and labour for, RCC Type B1 1:2:4 (20 mm graded aggregate) for foundation including rafts, footings, foundation beams;, plinth beams; bases for columns, etc, etc all as specified and as directed

Material and labour for, Flat Form work to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams: and similar work; vertical or to batter all as specified & all as directed

Material and labour for, RCC in Type B1 1:2:4 (20 mm graded aggregate) for Columns, pillars, piers, posts & struts etc all as specified and as directed

Material and labour for, Form work to sides of pillars posts, struts, piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape all as specified & as directed

Material and labour for, RCC in Type B1 1:2:4 (20 mm graded aggregate) for Beams, cantilevers, bresummers, lintels over 1.5 m span etc all as specified and as directed

Material and labour for, Flat Form work to sides and soffits of floors or roof beams, beam haunchings, girderrs, bressum-mers, lintels cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc complete all as specified and directed

Material and labour for TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete all as specified and directed

Material and labour for TMT bars 5 mm dia & over upto & including 10 mm dia in stirrups, spacers & binders etc complete all as specified and directed

Material and labour for (Type B1 1:1.5:3),20mm Graded Aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelvescomplete all as specified and directed

Material and labour for,Formwork to rough finish surface of flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)complete all as specified and directed.

Material and labour for Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings, opening in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exceeding 20 cm wide complete all as specified and directed

Material and labour for Pre-cast cement concrete block masonry (Type C1, 1:3:6, 20mm aggregate) with solid blocks, exceeding 10cm in width and setting in mortar, complete all as specified and directed.

Providing 40mm thick damp proofing course 1:2:4 type B-0 including necessary form work including WPC all as specified & as directed.

Material and labour for 15mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4 finished even and smooth without using extra cement mixed with water proofing compound complete all as specified and directed. (Note :- WPC shall be measured & paid separately)

Material and labour for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral waterproofing compound (ISI marked) complete all as specified and directed

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed

Material and labour for, applying 3 coats white washing on wall with preparing new plastered surfaces complete all as specified and directed

Material and labour for, applying 3 coats white washing on ceilling with preparing new plastered surfaces complete all as specified and directed

Material and labour for Filling under floor with excavated soil spreading and levelling in layers including watering and well ramming complete all as specified and directed

Material and labour for, Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc complete all as specified and directed

Material and labour for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) including necessary form work as in sub base of flooring, complete all as specified and directed

Supply and fixing Non skid coloured plain/printed glazed tiles of size 300 x 300 x 6mm to 7 mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20 mm thick rendering in CM 1:4 complete all as specified and directed

Supply and fixing coloured plain/printed glazed tiles of size 300 x 450 x 7 mm, on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick rendering in CM 1:4 complete all as specified and directed

Material and labour for 25mm thick PCC of type B-1, 1:2:4 (20mm graded stone aggregate) for padding complete all as specified and directed

Material and labour for 25mm thick PCC (1:2:4) type B0using 12.5mm graded stone agg as in Top surfaces finished even and fair complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mmX47mm made out of 5mm both side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening all as per specifications and drawing shown on SSR part II complete all as specified and directed

Supply and fixing factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & both side prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of both side prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown in SSR Part II with the size of door shutter as required complete all as specified and directed

Material and labour for moulded grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with suitable aluminum frame of size 37x19x2mm complete all as specified and directed

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed

Supply and fixing for butt hinges 100mm size medium weight stainless steel complete all as specified and directed

Material and labour for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

Supply and fixing Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

Supply and fixing aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

Supply and fixing aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.

Supply and fixing 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe 32mm dia complete all as specified and directed

Supply and fixing soap dish of 1mm thick stainless steel box type fixed with screws complete all as specified and directed

Supply and fixing vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated fancy type pillar tap 15mm bore, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern) and trap (P), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete light colour including fixing bolts complete all as specified and directed

Supply and fixing vitreous china water closet (squatting pan), orissa patern size 580 x 440mm white with integral, foot rests an including 'P' trap and lime bedding making good to floors complete all as specified and directed

Supply and fixing vitreous china urinals spreader bowl type flat back size 465 x 355 x 265 mm white including providing and fixing plugs bedding urinal against wall CM 1:2 securing urinal with 60mm long brass screws pointing arround urinal back in cement, fixing grating and union for discharge pipe complete all as specified and directed

Supply and fixing 15mm dia Bib taps cast copper alloy, with Chromiun plated crutch or butterfly handle screwed down,for iron pipe or brass ferule complete all as specified and directed.

Supply and fixing 15mm dia angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions complete all as specified and directed

Supply and fixing 15mm dia 2-in-1 bib tap with angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions complete all as specified and directed

Supply and fixing shower rose 125 mm dia of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed.

Supply and fixing health faucet spray type jet with brass jet, chromium plated, and 1.5m long PVC flexible pipe complete all as specified and directed.

Supply and fixing 15mm size PVC connections with PTMT nuts of length 450 mm complete all as specified and directed

Material and labour for 32mm dia Low density poly ethylene pipes(LDPE) of pressure rating 6 Kgf/cm2 fixed complete to wall, ceiling or in floors etc complete all as specified and directed

Material and labour for 40mm dia Low density poly ethylene pipes(LDPE) of pressure rating 6 Kgf/cm2 fixed complete to wall, ceiling or in floors etc complete all as specified and directed

Material and labour for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed

Supply and fixing for Rotational moulded polyethylene water storage tank of 1000 liter capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

Material and labour for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 to ends of landings, steps, cills sunshades, shelves lintels etc complete all as specified and directed

Material and labour for cutting holes or through PCC block / RCC wall built in CM and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required, superficial area exc 150 sqcm but not exceeding 400 sqcm all as specified & as directed

Supply and fixing for 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified & as directed

Supply and fixing for 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified & as directed

Supply and fixing 75 mm bore PVC (SWR) pipes Type B ISI marked single socketed in any length with rubber ring joints laid on wall fixed complete all as specified and directed

Supply and fixing 75mm dia PVC (SWR) bends any radius with access door all as specified & as directed

Supply and fixing 110mm dia PVC (SWR) bends any radius with access door all as specified & as directed

Supply and fixing for PVC (SWR) reducers 110mm bore all as specified & as directed

Supply and fixing for PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified & as directed

Supply and fixing for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified & as directed

Supply and fixing for PVC (SWR) vent cowl 75 mm bore all as specified & as directed

Supply and fixing 25 mm thick Kota Stone as partiton including necessary cutting work to vertical surfaces complete all as directed.

Supply and fixing for 20mm bore UPVC pipes of pressure rating 10 kgf/cm2 laid in trenches of any description or in any position including fittings complete all as specified and directed

Supply and fixing for 25mm bore UPVC pipes of pressure rating 10 kgf/cm2 laid in trenches of any description or in any position including fittings complete all as specified and directed

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- ills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Material and labour for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. all as specified & as directed

Material and labour for 75mm thick PCC (1:3:6) type C-I (Using 20mm graded stone aggregate) as in plinth protection laid in panels incl bitumen filling in joints and finish the top surfaces even and smooth without using extra cement complete all as specified.

Material and labour for Salt-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed as specified

Material and labour for Cement concrete type 1:4:8 type D2 concrete bed to drain pipe of dia 150 mm including packing under and hounching against the sides of pipes after they are laid and tested

Material and labour for PCC 1:2:4 type B1 using 20mm size graded stone aggregate as in benching of man holes including making drains and necessary form work finishing even and smooth with using extra cement all as specified and directed

Material and labour for PCC in 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping including weathering round or chamfered and necessary form work required all as specified and directed

Material and labour for Pre cast reinforced cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) set in cement mortar 1:4 for man holes cover slab all as specified and directed

Material and labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

Material and labour for GI tubing light grade with all fittings laid in ground for cable protection of size 40 mm dia complete all as specified and directed

Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of the following cross sectional area 10 sqmm 2 core complete all as specified and directed

Material and labour for sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I).

Supply & Laying un-reinforced precast concrete cable cover type-1 Class IV, size of 250 mm x 150 mm x 40 mm laid dry in trenches for under groung cable protection complete all as specifed and directed.

Material and labour for point wiring for One light point controlled by one; one way switch. with using 1.5 Sqmm (nominal sectional area) multi stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit of adequate size fixed on surface with PVC rawl plugs with and including wooden box/sunken type pressed steel terminal boxes of required size of not less than 1.6 mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes

All as per item No 93 here-in-before One fan/exhaust fan point controlled by one, one way switch.

All as per item No 93 here-in-before One 3 pin socket out let 5 amp point on the same board

All as per item No 93 here-in-before All as per Item no 1 here in before but of using FRLS cable of size 4 sqmm for phase and neutral and by using 2.5 sqmm FRLS cable for earth continuity all as specified and directed

Supply and fixing ceiling rose, surface bakelite, 65X20mm three terminal complete all as specified and directed

Supply and fixing switch piano flush button single pole230 / 250 volts one way 5 Amps.

Supply and fixing switch socket outlet five pin, 5 Amps, flush type, 230 volts AC circuit complete all as specified and directed.

Supply and fixing switch socket outlet five pin, 5/15 Amps, 230 volts AC circuit, 2 in one , flush type complete all as specified and directed

Supply and fixing sheet metal enclosure powder painted for MCB DB SPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by accepting officer

Supply & fix MCB SPN 415V, C series, 6 to 32 .Amps 10 KA rating ISI marked and connecting complete all as specified and directed.

Supply & fix MCB SP 230V, C series, 6 to 32 Amps 10 KA rating ISI marked and connecting complete all as specified and directed.

Supply and fixing elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic ballast, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

Supply and fixing 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Supply and fixing Exhaust fan ventilator DX 250mm sweep 36W ideal for mounting on glass/wooden window 220/230 Volts AC steel body and connecting up to the ceiling rose with flexible three core copper conductor of size 23/.0076 including provision to fix the ventiliar fan to the glass/wooden window/ by providing duitable fixing arrangement, farse nut, bolts etc complete all as specified and directed.

Material and labour for cutting the existing GI / PVC pipe 100 mm / 50 mm dia in position for insertion of new Tee for branch connection complete all as specified and directed.

Supply and fixing UPVC ball valve with operating handle (stop valve) of size (25 mm dia) both ends threaded complete suitable for fitting with ASTMD-1785, Sch 40 UPVC pipes all as specified and directed.

M/s Pal Builders

zotabrothers