Tender for SOP to installed LWSS Pumping Machinery at Plochhi in E section Karsog-2nd Under Electrical Sub Division Karsog.

Erection Charges

Add Erection Charges as per Cost Data 2023-24

Add extra manual carriage charges for an Average Lead 1.000 Km. from Road Head to Site of Work as per Cost Data 2023-24.

Supply Part ( 22/.4 KV 25 KVA Transformer )

Steel Tubular Pole (9mtr working Load >200 Kgf/m2)

Muffs(2000mm) with concerete filling

X-Arms :( Channel Iron (100x50x6mm) Length 2800mm x 2no.) for incommer line

MS Angle iron (50x50x6mm) Length 2800 x1 No. for L.A

X-Arams ( Channel iron (75x40x6mm, Length x 4No. ) for Supporting DO Fuse Unit & G.O Switch

Transformer Bed, Belting & Knee Bracing

X-Arms ( channel Iron (100x50x6mm) Length 2800mm x2 noi. For transformer bed

X-Arms ( channel Iron (100x50x6mm) Length 460 mm x2 no. For Supporting main Channel of Transformer

MS Angle iron (50x50x6mm) Length 2800 x2 No.

MS Angle iron (35x35x5mm) Length 460 x2 No.

MS Angle iron (50x50x6mm , Length :- 950mm x 2No. For Bed Knee Bracing

Transformer LT Dist Box and GO Switch fixing Assembly

Ms Angle Iron (50x50x6mm ) Length (2800mm) x 2No.

Ms Angle Iron (50x50x6mm ) Length (450mm) x 1No.

GO AB Switch Unit (11Kv ,400A 25KvA ) Tripple Pole O/D Type

D.O Fuse Unit

Surage Arrester , 9kN Station Class (Procelian Type)

Disc insulator Set (Comprising 1 No. Disc:(Procelain , BS ,12 Kv 90 Kn ) Including Dead End Clamp etc.)

Stay set Complete

Pipe Eathing Set

6/8 Swg G.I Wire for Earthing

L.T Distribution Panel Box with MCCB (50A ,25KA ,4 P)

Half Clamp (MS Flat 50x60mm)

Full Clamp (MS Flat 50x60mm)

Nuts & Bolts of Various Size ( Galcanised /Coated ) (preferably 16 mm Dia or more 9 woth flat And Spring washers)

Aluminium Thimle

Copper Thimle 200Amp

Danger Plate

Barbed Wire

LT Cable 3.5core )35mm2

a) Aluminium Paint

B) Red oxide

LT Switched capaitor 9-Kvar for 25Kva 9 rate per Kvar)

Chain link Fencing , Angle iron , Gate etc. for transformer fencing

Erection part ( (22 KV H.T Line on ST Pole) )

Add. Erection charges as per C.D. 2023-24 :- i) Erection of Steel Tubular 11.00 Mtrs.Single Pole Str. a/w allied fitting

ii)Erection of Steel Tubular 11.00 Mtrs. D/Pole Str. a/w allied fitting

iii) Erection of Steel Tubular 9.00 Mtrs.Single Pole Str. a/w allied fitting

ii)Erection of Steel Tubular 9.00 Mtrs. D/Pole Str. a/w allied fitting

iv) Erection of H.T. Stay Set : Digging of pit, fixing of stay rod, nozzeling & tightening And filling of pit

v) Earthing :Digging of pit, Fixing of G.I. wire to the earthing system and filling of pit

vi) Fixing of Jumper

vii) Sagging of Conductor 1.00 Km. Single G.I. Wire/ AAAC/ACSR 20/25 mm2 : Laying, Stringing, Sagging & binding with insulator

viii) Sagging of Conductor : 1Km Single ACSR/AAAC 6/1/3.35 mm (100mm2) : Laying, Stringing, Sagging & binding with insulator

Add extra manual carriage charges from Road Head to Site of Work for an Average lead 0.400 Km. as per C.D. 2023-24. i.e (0.450x0.750=0.355 km)

Supply part of HT Line

Prov. Steel Tubular Pole 9.00 mtr Working Load >227KG

Prov. Steel Tubular Pole 11.00 mtr Working Load >227KG

Prov. RCC Muff with Concrete Filling 2000mm length.

Prov. ACSR Cond.6/1/3.35mm ( 50 mm2)

Prov. G.I.No. 6/ 8 SWG for Earth wire for PCC & S/T Pole

Prov. C.I.X-arm (100x50x5mm), Length(1800) for S. Pole Str.= 1800 x3= 5400 mm= 5.4Mtr

Prov. C.I. X-arm(100x50x5mm),Length: 2800x10= 28000mm= 28 Mtr for D.Pole Str.

Prov. A.I.X-arm(50x50x5mm), Length:2100x3=6300 mm = 6.3Mtrs.for Gaurding

Prov. A.I.X-arm(50x50x5mm), Length : 3000x4= 12000mm =12.00 Mtrs.for Gaurding

Prov. A.I Knee Bracing set (50x50x5mm), Length (2x850) for Single Pole = 850 x 2 x6 =10200 mm = 10.2 Mtr.

Prov. Belt Set (X-Bracing Set)M S A. Iron (50x50x5mm) Length:1500x2x4=mm =12.00Mtrs.

Prov. Belt Set (X-Bracing Set)M S A. Iron(50x50x5mm) Length: 2700x2x4=21600 mm = 21.6Mtrs.

Prov. Stay Set Complete in all respect i/c Guy Assembly with Helically Fitting

Prov. H.T. Earthing for PCC /S/T Pole

Prov. Full Clamp with nuts & bolts M.S. Flat 50x6 mm

Prov. Half Clamp with nuts & bolts M.S. Flat 50x6 mm

Prov. Pole Top Clamp with nusts & bolts M.S .Flat-do-

Prov. Earth Hook for Earth Wire

Prov. Danger Plate (250x200x1.6 mm)

Prov. Nuts & Bolts Of various sizes ( Gaivanised/ Coated) ( Preferably 16 mmɸ or more with flat and spring washers)

Prov. Barbed Wire

Prov. Alluminium Paint

Prov D.O Fuse unit

Koyla Engineering Works (BID ID -517281)

SATPAL (BID ID -517294)