SPL REPAIRS TO BLDG NO. P-06, P-20,P-21 AND P-34 AND OFFICE OF AGE BR-I AT MIL STN BHUJ UNDER GE ARMY BHUJ

Amount

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:6 over stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed.

M&L for 15 mm thick rendering on stone masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified.

M & L for preparation of old decorated surface on walls and applying two coat of acrylic weather proof paint (Exterior grade) over a coat of primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified.

S&F Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel, flat or MS hollow square/ rectangular any type, size/ sections), including distance pieces, cleats etc conforming to FE- 290 (Gde-E- 165), including fabrication, erraction and fixing complete all as specified.

Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed.

Dismantling Plain or corrugated Asbestos cement including Nainital or similar pattern roof coverings, complete all as specified.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws etc; complete all as specified and as directed.

Taking down chowkat or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame and removing to store

Taking down chowkat or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame and removing to store

Taking down shutters of any description and in any position exceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed.

S&F factory made 35mm thick flush shutters , solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified.

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified.

M&L preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L Virified Ceramic tiles Dark shade 8 to 9 mm thick (square/rectangular) polished/Matt/Glossy, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in epoxy grout and including 15 mm thick screed bed in CM 1:4, complete all as spcified and directed

All as above but on vertical surface as in skirting/Dados over 8 to 9 mm thick plaster cm 1:4.

M & L for glazed coloured white tiles of size 450x300x 7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with white cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as spcified and directed.(Make Approved By GE)

M&L for 10 mm thick rendering in cement mortar (1:4) on vertical surfaces for backing of tiles complete all as specifed.

M& L for applying Cement putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as all specified and directed

S&F in repair 150 mm long floor door stopper of a brass body and tongu with hard drawn steel spring, fixed in floor

M&L for preparing old painted surfaces of steel and iron surfaces over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified .

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

S&F (concealed / open)20 mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore.

S&F (concealed / open) 25mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore.

Hacking out old broken glass (any thickness, size, quality or escription) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 4 mm thick ordinary quality and glazing with oil putty or wooden beads complete all as specified.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20mm thick Granite jet Black (of any type) work (table rubbed and polished) in cooking plateform, Jambs cill and like set in cement mortar (1:4) inlcuding pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including rounding of exposed edges of slab smoothly and polished complete all as specified and directed.

M&L for framed brackets of angles or tees with web and franges cut to shape, drilled and countersunk for screw incl bending and welding angles, as necessary gusset plate plates, reviting etc 10 kg each brackets confirming to Fe 290 Gde E-165.

Supply and fixing factory made uPVC white colour Three track three panels sliding window / ventilator with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm all as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

Supply and Fix in repairs, seamless ceiling with using 12mm thick, factory made gypsum fiber board, fixed on GI frame work for seamless ceiling suitable for suspended system with and including applying two coats of oil bound distemper over a coat of primer to give even and smooth finish without showing any joints complete all as specified and directed.

M&L for preparation of old decorated surface and applying two coat of white wash on walls , complete all as specified and directed.

Demolition of pre-cast concrete block masonry built in cement mortar of any description in any position complete all as directed

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

S&F 0.56 mm Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and traight flashing with self tapping screws etc; complete all as specified and as directed

S&F Single Piece WC with PP Close Seat cover Hinges Dual Flush Cistern Fitting Fixing Accessories And Accessories set size 360x640x685 mm S Trap 110mmas approved and directed by Engineer-in-Charge. (Make : Jaquar/Kohler/ Cera)

S&F in repair vitreous china Counter/ Table top Wash hand basin (White) of size (570x420x195 mm) mm complete all as specified. (Cat No. FLS-WHT-5601) Make: Jaquar/Equivalent

S&F Exposed Part Kit of Single Lever Basin Mixer Wall Mounted chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout 15 mm nominal bore (Cat No.ARI-CHR-39233NK) Make: Jaquar/Equivalent

S&F 32 mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified.

S&F Single Lever 3-inlet Diverter Exposed parts kit chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly Sleeve and Button Cap , 15 mm nominal bore complete (Cat No.OPP-CHR-15193NKPM) Make: Jaquar/Equivalent

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for bedding of tiles complete all as specified.

Demolition of cement concrete (un-reinforced) of any description & in any position not specifically provided complete including dismantling of floor tiles etc complete all as specified.

M&L for 25 mm thick PCC 1 :2 :4 type B-0 (Using 12.50mm graded stone aggregate) as in floor complete all as specified and as directed.

M&L Durastone/Endura heavy duty M&L Virified not less than12 mm mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in epoxy neat cement slurry and pointedin white or coloured cement to match , complete all as spcified and directed

Refixing Steel work in tubular trusses/mild stee including special shaped washer etc. complete using ERW or induction butt welded tubes complete all as spcified and directed

Excavation in trenches n.exc. 1.5m wide and n.exc 1.5 m in depth for foundation for laying /taking down sewage / water supply lines , forming bottom surfaces to required slpoe & gradient and n.exc 10sqm on plan and n 'exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) of 150mm bore set in cement mortar including PCC in bed and haunching against side complete all as specified and directed

M&L PCC (1:4:8) type D-2 (using 40 mm graded crused stone aggregate) as in bed to150 mm bore salt glazed stone ware drain pipe including packing under and haunching against the side of pipe after they are laid and tested complete all as specified and directed

S&F jointing and testing for reinforced concrete drain pipes, 150mm bore, class NP-2, laid and jointed with collar in CM (1:1) complete all as directed

M&L for PCC 1:2:4 type B2(using 40mm graded aggregate) as in benching surface channels including fair finishes of surfaces chamfering, throating and weathering and necessary form work complete as specified and directed

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in foundation of manholes, mass concrete etc. complete all as directed

M & L Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 (using 40 mm graded stone aggregate ) smooth finished, and reforming benching as required for 150 mm to 300 mm dia of pipe

Supply only water proofing compound

Returning ,filling in including spreading levelling watering and well ramming in layers not exc 25cm thick in soil in any depth complete all as specified and directed

Removing excavated soil/ materials to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as directed

S&F in repair Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified

S&F in repair Stop valves, fancy type chromium plated ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified

S &F in repair 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia complete all as specified & directed

S&F pillar taps in repair of cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with long swan shanks and fly nuts screwed for iron pipe, 15mm bore fancy type

S&F stainless steel health faucet witrh 1 Mtr tube and hoock complete all as specified and directed by Engr-in-charge. Confirming to Cat part No ALD573 of jaguar/PRAYAG completed all as specified

S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified

S&FBrass, sliding door bolt 300 mm with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed completed all as specified

S&F 18 mm thick prelaminated PVC Cheluka ply prelaminated one side with decorative choice lamination and other side plain fixed with screws to PVC celuka ply works all as directed and as per manufacture instructions Make : Rajshree plasticwood

All as per Above item but 12 mm thick plain cheluka plywood

S&F in repair Kitchen basket stainless steel for Cup and saucer basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters

S&F in repair Kitchen basket stainless steel for Partition basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters

S&F in repair Kitchen basket stainless steel for Plain basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty ) of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters

S&F in repair Kitchen basket stainless steel for Dish(plate) basket size 430 x508x250 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters

S&F brass Handle fabricated type polished of Size 100 mm

S&F brass Handle fabricated type polished of Size 75 mm

S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified and as directed.

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified.

S & F of Corner Glass Shelf (with Bracket) CAT NO ACN-1173 JAGUAR or equivalent incl all fittings and accessories all as spd and directed

S&F Soap dish of chromium plated or stainless steel fixed to wall with chromium plated brass screws.

S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified.

S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore.

S&F in repair PVC (SWR) bends any radius 110mm bore.

S&F in repair PVC (SWR) bends any radius 75mm bore.

S&F in repair PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified.

Dismantling Prelaminated particle boarding, any description, fixed in any position with screws.

S&F Solid PVC wall lining consisting of 5mm thick plain single colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications as specifed and directed

M & L for hard core of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

M & L 100mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) as in sub base including use of necessary form work.

Supply and Fixing in repairs, SFRC man hole cover of size 600mm dia x70mm thick with frame set in cement mortar 1:4 complete all as specified and as directed Notes: - (i) Make of SFRC Manhole/drain cover : (a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE. (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame

Supply and Fixing in repairs, SFRC manhole cover of size 600mm x 600mm x 70mm thick with frame set in cement mortar 1:4 complete all as specified and as directed. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame

Supply and Fixing in repairs, SFRC cover slabs of size 450mm x 450mm x 40mm thick with frame set in cement mortar 1:4 complete all as specified and as directed Notes-(i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete (b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame

S & F in repair Stainless steel curtain rods 25mm dia fancy type with required supports, and open/end brackets complete all as specified and directed.

Dismantaling and taking down copper / aluminium point wiring any type / size complete with removing all connection and accessories such as switches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of fitting , batten , steel or PVC conduit , casing caping etc compele and making good the disturbed surface

Taking down old and unserviceable sub main wiring any size / type / core incl earth wire complete with batten/conduit etc and making good the disturbed surface to match the existing disturbed surface all as directed

Taking down old and unsrevicable sheet metal enclosure , switch fuse unit , distribution bord any type /way / capacity including fuses,MCB's , insulator etc complete after removing all connection and making good the disturbed surface all as directed

M&L for Point wiring complete with FR PVC insulated unsheathed , 1100 V grade conforming to IS 694 , 1.5 Sqmm (Norminal area) multistranded ,copper conductor cable drawn through in non metallic rigid PVC conceled/surface conduit medium grade ,minimum 20 mm dia, ISI Marked, with sutaible size of 1 to 8 module metal flush boxes and back plate for mounting of modular switches/socket and regulators and including modular fornt plate with all acessories complete

One light point controlled by one way one switch SP 5 Amps ,240 V.

One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V

One switch socket outlet 3 Pin, 5 Amps, SP on independent board.

One switch socket outlet 3 Pin, 5 Amps, SP on same board.

All as per the above item No 4 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet.

S&F modular switch one way 6 Amps , 1 module type complete .

S& f modular socket , 6 Amps , 2/3 pin combined 2 module complete.

S& f modular switch socket combination, 6 Amps / 16 Amps , 2/3 pin combined 2 module complete.

S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete

Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting upto PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirement and 2 Nos of round or square PVC bolck for fixing of FTL fitting complete all as per directed

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light,6000K complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core 0.5 sqmm flexible copper conductor cases of suitable size complete all as specified and directed

supply & fixing modular fan regulator step type , 1 module complete all as specified.

M&L for sub main wiring with two runs of 6 Sqmm (2x6 sqmm )1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductorcable confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in walls/roofs/floors etc with one run of 6 Sqmm (1x6 sqmm ) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and directed. Note:- 2 runs of 6 Sqmm ,one run of 6 Sqmm ( 2x6 sqmm + 1x6 sqmm ) cable and one meter of conduit will be measured as one unit /Rm.

M/L for Sub main wiring with 2 runs of PVC FRLS insulated unsheathed multi stranded single core copper conducter 4 Sqmm drawn through PVC conclead conduit including accessaries with 4sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: (a)2 runs of cable and one run earth wire and conduit will be measured as one length. (b) cutting chases in to the wall of any thickness , fixing suitable size conduit and drawing copper conductor and and make odd the disturbed surface to match with the existing surface after pluging the holes complete all as specified and directed

S&F sheet metal enclosures for distribution board when MCB to be used SPN ( Single pole and neutral ) 8 way, 240 Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door type complete all as specified and directed.

S&F in MCB TPN, 63 Amps,415 Volts, rupturing capacity 10 KA."C" Series complete.

S&F sheet metal enclosures for distribution board when MCB to be used TPN ( Triplepole and neutral ) 4 way, 415Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door type complete all as specified and directed.

S&F MCB SPN,40 Amps, 240 Volts, rupturing capacity 10 KA."C" Series complete.

S&F MCB SP 40 Amps, 240 Volts, rupturing capacity 10 KA "C" Series complete.

S&F MCB SP, 5 to 32 Amps, 240 Volts, rupturing capacity 10 KA "C" Series complete.

M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.3 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed. Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II. (ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule. Note :- (i) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (ii) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete,complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers All as specified and Directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep copper wound 100% aluminium blades with tickness1.0mm. Min air delivery 210 CFM with service value of BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 25 sqmm 4 core complete all as specified and directed

Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete as sepecified.

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm.

Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point.

M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm complete. Complete all as specified and directed.

Supply and laying GI tube light grade 50 mm bore complete. Complete all as specified and directed.

Supply and lay pipe uPVC pipe including fittings of size 50 mm (2.0") dia complete all as specified and directed.

Supply and lay pipe uPVC pipe including fittings of size 25 mm (1.0") dia complete all as specified and directed.

supply and fix ball valve 25 mm dia including all fittings all as specfied and directed

Supply and fixing electric water heater, storage type steel body with inner tank and heating element upto 1.5 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and directed

Supply and fix desert cooler, plastic body electric driven (single phase), having nominal air flow capacity of more then 4000 CFM ,Honeycomb cooling pads design, ice chamber,water level indicator,Four way air deflection,Easy Mobility on wheels including all necessary arragement complete all as specified and directed

Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting.

Supply and fixing in replacement of post top lantern LED type of capacity 20 Watt 230 Volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact as per manufacture recommendation and corrosion resistant complete with driver and lamp all as specified and directed

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

Sanjay Enterprise (BID ID -3508511)