REPAIR OF WOODEN FURNITURE POLISHING AND CANING AT AF STN BHUJ

Amount

BEDHARD WITH PLYWOOD TOP:- Removing following old and unserviceable parts / components of “Bed Plywood Top” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 246, 247)

Head rest complete.

Foot rest complete.

Plywood top with 12 mm thick BWR commercial.(Make kitply/Century /Greenply/ National/Bhutan

Long rail of first class hard wood (teak wood).

Short rail of first class hard wood (teak wood).

Both side veneered of Head Rest.

Both side veneered of Foot Rest

Table Dressing Gents with Mirror:- Removing following old and unserviceable parts / components of “Table dressing gents with mirror” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 230)

5 mm thick Looking Mirror with 06 mm thick plywood at the back.

Complete frame of first class hard wood (teak wood) for mirror .

Lower wooden box made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, 6 mm thick back plywood & bright polished brass knob 40mm dia complete.

Peg Table:- Removing following old and unserviceable parts / components of “Peg Table” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-236 & 277

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Table centre:- Removing following old and unserviceable parts / components of “Table centre” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-235 & 274

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Teapoy Wooden:- Removing following old and unserviceable parts / components of “Teapoy wooden” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-232 & 278)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Table Computer:- Removing following old and unserviceable parts / components of “Table Computer” and S&F new parts / components of same size, existing pattern and the same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/03)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Drawer made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, 6 mm thick bottom plywood with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

Pull out tray for mouse made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

Pull out tray for Key Board made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

FOAM WITH & WITH OUT BACK:- Removing following old and unserviceable parts / components of “FOAM WITH & WITH OUT BACK” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, nut and bolt etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-77,78)

Seat made of one piece of first class hard wood (teak wood).

Back rest made of one piece of first class hard wood (teak wood).

Table 3x3 wooden:- Removing following old and unserviceable parts / components of “Table 3x3 wooden” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-88 M, 291)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Chair dining with cushioned:- Removing following old and unserviceable parts / components of “Chair dining with cushioned ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/04)

Front Leg made of one piece of first class hard wood (teak wood).

Rear Leg made of one piece of first class hard wood (teak wood).

Bottom stiffener long made of one piece of first class hard wood (teak wood).

Bottom stiffener short made of one piece of first class hard wood (teak wood).

Short rail of seat made of one piece of first class hard wood (teak wood).

Long rail of seat made of one piece of first class hard wood (teak wood).

Complete seat made out of 75 mm thick 32 density foam with 12 mm thick plywood base, upholstered with rexin.

BOARD NOTICE OF SORTS

Removing unserviceable Green Baize cloth from Board Notice 4'X4' & Supply and fix new Green baize of best quality (as approved by the GE, costing not less than Rs.150 per Rm of standard availabele width) to board notice usiung appropriate size screws incliding minor repair work to wooden frame, all as specified and as shown on drawing No FD: 05-09.

All as per item No 10.01 above but Board Notice of size 4'X3'

All as per item No 10.01 above but Board Notice of size 6'X4'

All as per item No 10.01 above but Board Notice of size 8'X4'

All as per item No 10.01 above but Board Notice of size 8'X6'

Removing unserviceable plain broken sheet glass of front shutter (one shutter) and connected beading from Board Notice of size 4'X4' and supply and fixing plain sheet glass 3mm thich and 1st class hard wood beading of size 10 mm X 10mm with and incliding screws all as specified and as shown on drawing No FD 05-09. Make of glass-modiguard/saint Gobin/ Asahi/ Atul.

All as per item No 10.06 above but Board Notice of size 4'X3'

All as per item No 10.06 above but Board Notice of size 6'X4'

Removing unservicable soft board and plywood of one shutter of Board Notice of size 4'X4' and supply & fixing same size of new 12mm thick soft board and 6mm thick commercial BWR frade plywoood, ISI marked, all as specified and as shown on drawing No FD - 05-09. Make Kitply/Century/Green ply/ National/Bhutan Board.

All as per item No 10.09 above but Board Notice of size 4'X3'

All as per item No 10.09 above but Board Notice of size 6'X4'

M&L for preparing old posished and newly repaced parts of Board Notice of size 4'X4' and applying two coats of french polish to complete board notice all as specified and as shown on drawing No FD-05-09.

All as per item No 10.12 above but Board Notice of size 4'X3'

All as per item No 10.12 above but Board Notice of size 6'X4'

All as per item No 10.12 above but Board Notice of size 8'X4'

All as per item No 10.12 above but Board Notice of size 8'X6'

TABLE WRITING (STUDY):- Removing following old and unserviceable parts / components of “TABLE WRITING (STUDY) ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and olishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-33 & 275, 249

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs made of first class hard wood (teak wood).

Drawer made out of 12 mm plywood.

Shutters out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

CHAIR DINING:- Removing following old and unserviceable parts / components of “CHAIR DINING ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-279)

Front legs made of first class hard wood (teak wood).

Rear legs made of first class hard wood (teak wood).

long / short rail of seat made of first class hard wood (teak wood).

Stiffener of back made of first class hard wood (teak wood).

Short & long stiffener of bottom made of first class hard wood (teak wood).

TABLE DINING 6 / 8 PERSON:- Removing following old and unserviceable parts / components of “TABLE DINING 6 / 8 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-239 & 273)

Top for TABLE DINING 6 PERSON made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Top for TABLE DINING 8 PERSON made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long rail for TABLE DINING 6 PERSON made of first class hard wood (teak wood).

Long rail for TABLE DINING 8 PERSON made of first class hard wood (teak wood).

CHAIR WOODEN BOTTOM:- Removing following old and unserviceable parts / components of “CHAIR WOODEN BOTTOM” and S&F new parts / components of same size, existing pattern and same materialn of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-56, 285 & 225)

Front legs made of first class hard wood (teak wood).

Rear legs made of first class hard wood (teak wood).

Front / Rear / Side rail of seat made of first class hard wood (teak wood).

Stiffener of back made of first class hard wood (teak wood).

Short & long stiffener of bottom made of first class hard wood (teak wood).

Wooden bottom made out of 6 mm plywood.

M&L for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-In-Charge.

M&L for cushion foam of 40 density with fabric cushion cover for seat of SOFA SET 5/4 seater, Superior quality of foam & cover. (Drg No FD-281. Tapestry cloth approved by GE not less than 340/- per mtrs.

CHAIR EASY:- Removing following old and unserviceable parts / components of “CHAIR EASY” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-229)

Front / Rear legs made of first class hard wood (teak wood).

Arm rest made of first class hard wood (teak wood).

Seat Front / Rear / side rail made of first class hard wood (teak wood).

Back Upper / bottom rail made of first class hard wood (teak wood).

TABLE DRESSING LADIES:- Removing following old and unserviceable parts / components of “TABLE DRESSING LADIES” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 251)

Looking Mirror of approved quality with back of 06 mm plywood and frame

Lower wooden box with drawer made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, 6 mm thick back plywood, 4 mm thick sliding glass, Aluminium channel etc complete all as per drawing.

TABLE BED SIDE:- Removing following old and unserviceable parts / components of “TABLE BED SIDE ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 248 / 246 )

Back of 6 mm thick commercial face plywood.

Side (left or right) made out of 18 mm thick plywood with 1mm laminated sunmica top wood finish duly polished at bottom, with first class hardwood (teak wood) beading.

Top / middle shelf made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading.

CHAIR WRITING:- Removing following old and unserviceable parts / components of “CHAIR WRITING” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-250, 280, 285)

Front legs made of first class hard wood (teak wood).

Rear legs made of first class hard wood (teak wood).

Front / Rear / Side rail of seat made of first class hard wood (teak wood).

Stiffener of Back made of first class hard wood (teak wood).

Short / long stiffener of bottom made of first class hard wood (teak wood).

TABLE 3' x 2' WITH & WITHOUT DRAWER:- Removing following old and unserviceable parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-41, 224, 283)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Leg made of first class hard wood (teak wood).

Long rail made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long bottom stiffeners made of first class hard wood (teak wood).

Short bottom stiffeners made of first class hard wood (teak wood).

Complete drawer made out of 12 mm thick plywood.

TABLE DINING 1200MM X 900MM:-

S & F replacement of unserviceable top of the table with new top of size 4'X3' made out of prelaminated particle board of 18mm/19mm thich, exteriou grade, (Phenol bonded) confirming to IS 12823-1990 with 4 mm thick teak wood edging all around of the top duly french polished complete all as shown on drawing. Make: Green Ply/Kitply/ Duratuf/ Bhutan/ Novapan. (Drawing No FD/Map-II/03)

S&F in replacement of unserviceable legs with new legs of seasoned sheesham wood duly french polished, all as shown on drawing.

S&F in replacement of unserviceable long rails with new long rails of seaso9ned sheesham wood duly french polished all as shown on drawings.

S&F in replacemen t of old brackets with new brackets of seasoned sheesham wood in corners dyly french polished, complete all as shown on drawings.

S&F in replacement of unserviceable short rails with new short rails of seasoned sheeesham wood duly French polished ass as shown on drawing.

M & L for preoeration of old polished surfaces of the table dining 4'X3' repaired under item Nos 22.01 to 22.05 above by sxrapping and cleaning and applying one coat of raw sienna and two coats of french polish and matching with the new repaired parts, all as specified and as shown on drawing.

REPAIRS TO HAT STAND WITH MIRROR:- Removing following old and unserviceable parts / components of “REPAIRS TO HAT STAND WITH MIRROR” and S & F new parts / components of same size, existing pattern and same material, with beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-233)

5 mm thick looking mirror.

3 mm thick Veneered plywood.

9 mm thick Back Plywood.

Aluminium Peg.

CHAIR WRITING WITH PAD:-

Removal of inserviceable rear leg (one leg) for chair writing with pad & supply and fix Ist class hard wood (teak) well seasoned leg (one leg) for chair writing and prepareation of new surfaces and applying two coats of french polish on leg complete, all as specified and as shown on drawing Nos FD-250.

All as per Item No 24.01 above but front leg (one leg) for chair writing with pad

All as per Item No 24.01 above but side rail (one rail) for chair writing with pad

All as per Item No 24.01 above but front rail (one rail) of chair writinng with pad

All as per Item No 24.01 above but back rail (one rail) of chair writinng with pad

All as per Item No 24.01 above but handle with pad (one handle with pad) for chair writinng with pad

All as per Item No 24.01 above but handle (one handle) for chair writing with pad

All as per Item No 24.01 above but back rest (set of two) of chair writinng with pad

All as per Item No 24.01 above but one set of stiffener(set of three stiffeners) of chair writinng with pad

M & L for preparation of old polished surfaces of the chairs repaired under item Nos 24.01 to 24.09 above by scrapping and cleaning and applying one coat of raw sienna and two coats f french polish and matching with the new repaired parts, all as specified and as shown on drawing

Table 1520 mm x 860 mm x 760 mm:- Removing following old and unserviceable parts / components of “ Table 1520 mm x 860 mm x 760 mm” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-139)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs made of first class hard wood (teak wood).

Top rails of section area 25 mm x 100 mm made of first class hard wood (teak wood).

Stiffener of sectional area 25 mm x 50 mm made of first class hard wood (teak wood).

SIDE BOARD:- Removing following old and unserviceable parts / components of “ SIDE BOARD” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-26 (M) / 371)

Back made out of 4 mm thick plywood.

Top made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading.

Door made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading.

Drawer made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading.

100 mm size steel hasp & staple.

knob 40 mm dia

Stool Dressing:- Removing following old and unserviceable parts / components of “Stool dressing” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/07 (Sheet 3 of 3)

Legs made out of teak wood

Short rail made out of teak wood

Front / Rear long rail made out of teak wood.

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Chair Easy Cushioned Wooden:- Removing following old and unserviceable parts / components of “Chair Easy Cushioned Wooden” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD -358)

Seat of 75 mm thick synthetic foam cushion of density 28 covered with leatherite rexin as approved by Engr -in-charge.

Back rest of 50 mm thick synthetic foam cushion of density 28 covered with leatherite rexin as approved by Engr -in-charge.

Hard rubber shoe

Repairs to Sofa set 3 Seater by Replacing of seat & back cushion foam 100 mm thick 40 density with fabric tapestry cloth as per sample approved by Engr - in - Charge. (Drg No. HOF-CSM-18, HOF-139,Godrej, Durian & Swadesi)

Sofa set 4 Seater:- Removing following old and unserviceable parts / components of “Sofa set 4 Seater” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373)

Arms made out of teakwood.

Front leg made out of teakwood.

Rear leg made out of teakwood.

Batten for seat and back made out of teak wood

Sofa set 5 Seater Removing following old and unserviceable parts / components of “Sofa set 5 Seater” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373)

Arms made out of teak wood.

Front leg made out of teak wood.

Rear leg made out of teak wood.

Batten for seat and back made out of teak wood

Bench Workshop:- Removing following old and unserviceable parts / components of “Bench Workshop” and S&F new parts / components of same size, existing pattern and same material, with beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No -GE (AF) J / FD / 02 / 01D & 145 M)

Top made out of first class hardwood.

Leg made out of teak wood of size 760 X 100 X 100 mm.

Shelf made of one pices first class hardwood (teak wood)

Rail made out of first class hard wood (teak wood) of size 2130mm X 100 X 100 mm.

S & F wooden bracket made of first class hard wood (Teak wood) fixing legs to long and short rail veries type of wooned table fixed with screw and duly polishing to match with existing complete as direction by Engr-in-charge.

motwani and associate

M/s Bombay Novelty Stores

M/s Pal Builders