Construction of ESRs for zoning of distribution network in Nabarangpur Municipality under State Plan, D.No.13-4215 SUJALA for the Year 2025-26

(Part-A) Construction of ESR at Zone-II Chaunriaguda

Design, construction, testing and commissioning of ESR /MBR etc all complte as per direction of EIC.Chaunriaguda (ESR 25Mtr Height)

(Part-B) (i) Clear water rising main and other ancillary work

Supplying of all materials labour T &P for Earth work excavation in all kinds of soil in pipe line trench within 1.50m initial lift and depositing the soil within 50m initial lead including rough dressing & leveling the bed etc complete as per direction of E.I.C. 250mm dia -D.I.K9 Pipe

Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class-K7 Conforming to IS:8329 - 2000 of the following nominal diameter including transportation from departmental store as per specification complete. (Earth work in trenches, jointing of pipes, specials and fittings to be measured separately). (250mm dia. DI K9 pipe)

Supplying all materials,labour and T&P for filling foundation and plinth with excavated materials(in all kinds of soil)

Supplying all materials,labour and T&P and making tyton rubber ring joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete.(Labour Only)

Providing flanged joints conforming to IS:3114-1994 to flanged C.I/D.I pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification complete

Supplying all materials,labour and T&P for fixing of cast iron sluice valve or non-return valve with double flanged ends for water works purposes of the following rating and diameter diameter including testing of joints as per specification all complete

250mm.dia.C.I. S/V PN-1.6

350mm.dia.C.I. S/V PN-1.6

Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete.

Laying of D.I. Speicals of different dia in trenchs as per P.H.Specification including of carriage of materials form store to site etc excludindg earth work & filling & cost of specials etc.

Supplying all materials,labour, T&P for laying in trenches MS Pipes of all classes conforming to IS3589-2001 & IS-3601-2006 of the following outside diameter as per specification complete (Earth work in trenches, jointing of pipes, specials and fitting to be measured separately)

Fbaricating,supplying and fixing of M.S. Fittings for culvert crossing and interconnecton work in critical section etc.

250mm dia MS.Bend

250mmdia M.S flange

250mm dia C.I.M.J.Collor`

Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.

Supplying all materials,labour,T&P for butt or fillet welding to the M.S mambers at site by using welding machine & generator with transportation charges of machineries & cost of approved electrodes etc all complete

Cost of C.I. Specials

Cutting of C.C. Road for taking D.I. pipes through and making good the damages etc. as per direction of EIC.

Supplying all materials,labour and T&P for (Mending good of damaged road) Cement Concrete (1:4:8) uing 40mm size hand broken granite chips.

Supplying all materials,labour and T&P for (Mending good of damaged road) Cement concrete (1:2:4) with 12mm size hard granite chips.

(ii) Cost of Fittings: Reputed Make Cast Iron Valve confirming to IS Specifications may be considered to used in WTP,Pumping Station, Rising Main & Reservoir sites of Kirloskar / Vag/ Audco or equivalent make

250mm.dia.C.I. S/V PN-1.6

350mm.dia.C.I. S/V PN-1.6

(Part-C) (i) Distribution Pipe line Zone-I to III and other ancillary work

Supplying of all materials labour T &P for Earth work excavation in all kinds of soil in pipe line trench within 1.50m initial lift and depositing the soil within 50m soil in pipe line trench within 1.50m initial lift and depositing the soil within 50m initial lead including rough dressing & leveling the bed etc complete as per direction of E.I.C.

Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class-K7 Conforming to IS:8329 - 2000 of the following nominal diameter including transportation from departmental store as per specification complete. (Earth work in trenches, jointing of pipes, specials and fittings to be measured separately).

100mm dia D.I.K7 Pipe

150mm dia D.I.K7 Pipe

200mm dia D.I.K7 Pipe

250mm dia D.I.K7 Pipe

300mm dia D.I.K7 Pipe

Supplying all materials,labour and T&P for filling foundation and plinth with excavated materials(in all kinds of soil)

Supplying all materials,labour and T&P and making tyton rubber ring joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete.(Labour Only)

(a) 100mm dia joints

(b) 150mm dia joints

(c) 200mm dia joints

(d) 250mm dia joints

(e) 300mm dia joints

Providing flanged joints conforming to IS:3114-1994 to flanged C.I/D.I pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification complete

(a) 100mm dia joints

(b) 150mm dia joints

(c) 200mm dia joints

(d) 250mm dia joints

(e) 300mm dia joints

Supplying all materials,labour and T&P for fixing of cast iron sluice valve or non-return valve with double flanged ends for water works purposes of the following rating and diameter diameter including testing of joints as per specification all complete.

100mm.dia.C.I. S/V PN-1.6

150mm.dia.C.I. S/V PN-1.6

200mm.dia.C.I. S/V PN-1.6

250mm.dia.C.I. S/V PN-1.6

300mm.dia.C.I. S/V PN-1.6

50mm.dia.DI Tamper proof Kinetic Air Valve

80mm.dia.DI Tamper proof Kinetic Air Valve

Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete.

Laying of D.I. Speicals of different dia in trenchs as per P.H.Specification including of carriage of materials form store to site etc excludindg earth work & filling & cost of specials etc.

Supplying all materials,labour, T&P for laying in trenches MS Pipes of all classes conforming to IS3589-2001 & IS-3601-2006 of the following outside diameter as per specification complete (Earth work in trenches, jointing of pipes, specials and fitting to be measured separately)

(a) 100mm dia M.S. Pipe ( 4.5mm thickness)

(b) 150mm dia M.S. Pipe ( 4.5mm thickness)

(c) 200mm dia M.S. Pipe ( 4.5mm thickness)

(d) 250mm dia M.S. Pipe ( 6.3mm thickness)

(e) 300mm dia M.S. Pipe ( 5.6mm thickness)

Fbaricating,supplying and fixing of M.S. Fittings for culvert crossing and interconnecton work in critical section etc.

100mm dia M.S. Bend

150mm dia M.S. Bend

200mm dia M.S. Bend

250mm dia M.S. Bend

300mm dia M.S. Bend

100mm dia M.S. Flange

150mm dia M.S. Flange

200mm dia M.S. Flange

250mm dia M.S. Flange

300mm dia M.S. Flange

100mm dia C.I.M.J Collar

150mm dia C.I.M.J Collar

200mm dia C.I.M.J Collar

250mm dia C.I.M.J Collar

300mm dia C.I.M.J Collar

Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.

Supplying all materials,labour,T&P for butt or fillet welding to the M.S mambers at site by using welding machine & generator with transportation charges of machineries & cost of approved electrodes etc all complete

Cost of C.I. Specials

Cutting of C.C. Road for taking D.I. pipes through and making good the damages etc. as per direction of EIC.

Supplying all materials,labour and T&P for (Mending good of damaged road) Cement Concrete (1:4:8) uing 40mm size hand broken granite chips.

Supplying all materials,labour and T&P for (Mending good of damaged road) Cement concrete (1:2:4) with 12mm size hard granite chips.

Providing quarry dust in widening upto toe with well watered and rammed including cost of all materials etc complete as per direction of EIC.

Construction of thrust block 250mm dia and 200mm dia.

(a) Construction of 2nos thrust block 250mm clear water rising main - Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. a) 250 mm dia. Pipe (End Portion)

Filling in foundatin and plinth with sand( including cost of sand & labour)

CC(1:4:8) with 4cm.hand broken Granite metal

Cement concrete (1:11/2:3) with 12mm.size crusher broken hard Granite chips for R.C.C.work (M Repair Work)

Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods,binding wire 18 to 20 gauge.

(b) construction of 2nos thrust block 200mm clear water rising main - Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. a) 250 mm dia. Pipe (End Portion)

Filling in foundatin and plinth with sand( including cost of sand & labour)

CC(1:4:8) with 4cm.hand broken Granite metal

Cement concrete (1:11/2:3) with 12mm.size crusher broken hard Granite chips for R.C.C.work (M Repair Work)

Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods,binding wire 18 to 20 gauge.

(ii) Cost of Fittings:Reputed Make Cast Iron Valve confirming to IS Specifications may be considered to used in WTP,Pumping Station, Rising Main & Reservoir sites.Kirloskar / Vag/ Audco or equivalent make cast iron Non Rising Spindle type Sluice Valve confirming to IS 14846

100mm.dia.C.I. S/V PN-1.6

150mm.dia.C.I. S/V PN-1.6

200mm.dia.C.I. S/V PN-1.6

250mm.dia.C.I. S/V PN-1.6

300mm.dia.C.I. S/V PN-1.6

50mm.dia.DI Tamper proof Kinetic Air Valve

80mm.dia.DI Tamper proof Kinetic Air Valve

(Part-D) Automation work of Zonal ESR & MBR

Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including Mounting arrangement Output 4-20 mA / HART ,Power supply - 24V DC ext. , Display - 4" LED , Accuracy Accuracy - +/- 0.1 % of full scale or better , Enclosure- IP 68

Level Transmitter - Designing, Supplying, installing,commissioning & testing of Ultrasonic level transmitter CE marked at each filter bed with following technical parameters Interfacing with PLC panel including mounting arrangement. Range - 0.5 mtr Output - 4.20 mA/HART Power supply - 24V DC ext. Display - 4" LED Accuracy - +/1 0.25% of full scale or batter Enclosure - IP 68

Designing, Supplying, Installing, Commissioning & testing of Flow Control Valve / Pressure reducing valve for inlet with flow measuring, flow controlling, pressure monitering & web based with cable, PLC etc. complete. Hydraulically operated self-actuated Flow & Level Control Valve (either with float or altitude pilot) with downstream orifice having Ductile Iron valve body, Y-Pattern, Double chamber unitized actuator, Fusion bonded Epoxy coating, Copper control tubing, with Latching Solenoid & Pilot operated as per design, additional Speed control feature, drip tight sealing, Iֺn-line serviceable, Internals Stainless steel & protected diaphragm suitable for drinking water WRAS/NSF/DVGW approved

Zone -II 200mm

Zone-II 250mm

Supply, install and commission Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/- 0.5% of measured value & protection as per given specifications for size 100 mm1000mm including sensor, transmitter surge arrestor, cable GI duct if suitable size for 25 mtrs built in GSM/GPRS (with Simcard and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications

200 mm Nominal Diameter Flowmeter

250 mm Nominal Diameter Flowmeter

UPS - Supply, installation and commissioning of single phase 1 KVA online UPS with pure sine wave & float cum boost charging with battery rack and maintenance fee battery system including cable power plug, switch having application in 24V lot DC battery (Drytype) charging to output continuous 3 hrs power backup all complete work (WTP-1 & MCC ROOM-1 Distribution-6)

GSM/GPRS modem - Supplying , Installing and Commissioning of SMS based ON / OFF operation of pumps at remote locations with test & trial including one year guaranty & two year comprehensive maintenance including SIM card & SMS charges. Wireless Motor Controller is suitable for all range of electrical motors and starters and pump sets. It shall protect pump set from dry run. Controller shall have inbuilt battery and charges automatically. Controller shall be controlled through SMS, Call, IVRS or Smart Phone application (All controlling modes are must). It shall have following features as, a. Auto Mode operation – Pump

Laying and Installation of OFC System

Supply of 1.5 sqmm x 12 Core CU.Armourded cable

Supplying and instalaltion of termination of 1.5sqmm x 12 Core CU. Armoured Cable

Supply of 1.5 sqmm x 4 Core CU.Armourded cable

Supplying and installation termination of 1.5 sqmm x 4 Core CU. Armored Cable

Supply of 1Pair x 1.5 sqmm Overall shielded -Armored cable

Supplying and installation of termination of 2 Pair x 2.5 sqmm CU. Armoured Cable

10 sq mm 3 Core Cu Unarmoured cable

19 mm DC Gland

2.5 mm CU socket

Supplying all materials, for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints of following in pipe as per specifications including testing with cost of all jointing materials, transportation to site etc. all complete as per the specifications and directions of Engineer‐in‐charge.

200 mm dia MJ Socket

250 mm dia MJ Socket

(Part-I) Operation and Maintenance Operation & maintenance of PH installation for five years as per scope of work and technical scope and direction of Engineer-in-charge (Excluding cost towards chemicals and energy charges)

Please Enable Macros to View BoQ information