Repairing and Renovation of old BT Road on Dwarika Nagar 1st lane (from YOGA VIDYA ASHRAM Toward Municipality Minipark.) in word no 01

Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.

Removal of excaveted material within 5 K.M lead including loading and unloding as per direction of engineer in charg

Filling in foundation and plinth with Sand watering and ramming as directed by the Engineer-in-charge

Cement concrete (1:4:8)with 4cm size hard granite metal per 1cum (P-43/4)

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying

Rigid and smooth centering and shuttering for C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor

Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.(AR, P-168/44

Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared su.(AR, P-169/45)

Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler..

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform a

Add for Transparancy board,Taking photograph