Construction of transit accommodation for JandK migrant employees at Fatehgarh Flood Colony khawajabagh Baramulla 21th block B.W.O Electric work

Wiring for light point / exhaust fan point /Bell point with (P+N+E) 3X1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed Conduits , with 1.5Sqmm Earth wire 6Amp .modular switch, modular plate, cover in front (Legrand/Havels/ABB/ eq. make to be approved by EIC) etc of approved quality and make ISO/IEC Certified (quality of wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) job including cost of Circuit Wire in 2.5Sqmm Multi strand Copper wire from Switch board to D.B complete. excluding cost of Conduits (wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) like Havels or Polycab or Anchor or Finolex/ eq. make to be approved by EIC (including modular GI Box etc)

Wiring for Sub main along with earth Wire with the following Sizes of FRLS –H PVC insulated Multi strand copper conductor, single core Cable in Recessed medium class PVC conduit as required. (excld .conduits ) .(wire shall be approved before execution of wok by SITE In-charge Engineer strictly

Supplying and fixing connections. testing and commissioning 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker Suitable for inductive load of following poles in the existing MCB DB of Each set complete. as required

Single Pole MCB

Supplying and fixing connections. testing and commissioning following rating, Double pole, 240 V, C* Curve Miniature circuit breaker (MCB),having a sensitivity current 30 mA in the existing MCB DB complete as reqd.

Supplying and fixing modular blanking plate/Indicator on the existing modular plate and switch box excluding modular plate as required

Supplying and fixing of AC / DC Bells with its Batteries

Supplying and fixing following rating, 32-40Amp 240v,2Module Change over Switch , C* Curve including making connections

Supplying, Installation, Testing and Commissioning of ABC Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G. and acetylene, and electrical fires etc MAP-90 certified

Supplying and fixing following rating, 100Amp 240v,DP MCCB, C* Curve including making connections

Supply, laying, Connecting and Commissioning of 185 sq mm 3.5 core XLPE/PVCinsulated and steel armored 1.1 KV grade Aluminum Cable of Havel’s /with required size of thimbles dully crimped with hydraulic crimping tool including p/ fixing of saddles /clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench [Subject to actual measurement during execution of work

Design, Fabrication, assembly, Installation, Testing and Commissioning of Front Operated Cubicle type compartmentalized as per form 3B free standing, dust and vermin proof (IP 42 ingress protection) LT panel suitable for use of 415 volts, 3 Phase 4 wire 50Hz suitable for a fault level of 55kA at 415 volts, fabricated from 2 mm thick Powder coated paint finish of approved shade CRCA MS sheet with hinged, gasketted9 metal based neoprene) and lockable doors having structural reinforcement with suitable angle/ channel/T / Flat section incl gland plates as required and lifting hooks with sleeved TPN AL Bus bars and G I strip of required size with 2 no earthing terminals complete with interconnections as required for MCB's and control wiring. Each incoming / outgoing breakers shall have thermal magmatic release. The panel will be made as per detailed specifications and drawings formatting part of this document.:

Incomer:-

(a).400 Amp TPN MCCB breaking capacity 50 kA with thermal release and adjustable settings .=1NO.

(b).1 Set of R,Y,B Phase indicating lamps

(c).1 No MFM with 630/5CT coils

(d).800 Amp TPN Aluminum Bus Bar set with colour coding each sleeves

Out Going :-

(a) 100-125 Amp D Pole MCB's=16NOs

(b).40 Amp D P MCB's=6Nos

( c). 63 Amp D.P MCB=1Nos

(d). ). 63 Amp TPN MCB=1Nos

ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER Rod EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value .Supplying, Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 2OMM Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Poly ethylene Pipe having Corrugation complete job

Supply and fixing of following way ,Horizontal type THREE POLE and Neutral) ,sheet steel MCB Distribution boards 415v/ ,on surface /recess complete with tinned COPPER BUS BAR ,neutral Bus bar ,Earth bar ,inter connections ,powder coated painted including earthing etc recessed in walls,incl refacing of walls complete job