Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 CrAccepted-AOC | ₹9.9 Cr Quoted ₹10.4 Cr | L1 | Accepted-AOC Being lowest bidder |
| 2 | L2₹10.5 Cr+₹8.5 L (0.82%)Rejected-Finance 35 B BHERU VILLAS SARDAR CLUB SCHEME AIR FORCE JODHPUR 342 011 | JODHPUR | JODHPUR | RAJASTHAN | 342011 | ₹10.5 Cr+₹8.5 L (0.82%) | L2 | Rejected-Finance Being higher bidder |
| 3 | L3₹10.9 Cr+₹52.1 L (5.02%)Rejected-Finance STREET NO 11 SECTOR NO 04 TILAK NAGAR SAGAR ROAD BIKANER RAJASTHAN 334001 | BIKANER | RAJASTHAN | 334001 | ₹10.9 Cr+₹52.1 L (5.02%) | L3 | Rejected-Finance Being higher bidder |
| 4 | L4₹12.4 Cr+₹2.0 Cr (19.1%)Rejected-Finance | ₹12.4 Cr+₹2.0 Cr (19.1%) | L4 | Rejected-Finance Being higher bidder |
| 5 | L5₹12.4 Cr+₹2.0 Cr (19.2%)Rejected-Finance | ₹12.4 Cr+₹2.0 Cr (19.2%) | L5 | Rejected-Finance Being higher bidder |
Tender Value
Refer Docs
EMD Value
₹8.9 L
Closing Date
17 Apr 2021, 6:00 pmClosed
CE Jodhpur Zone
HQ CE Jodhpur Zone
DEMOLITION AND RECONSTRUCTION OF OTM BUILDINGS 12 TOILET BLOCKS AND RETROFITTING OF 03 X MH BLDGS AT BHUJ MILITARY STATION JOB NO SC/MW/1289
2021_MES_425776_1
800508/Bhuj/2020-21/E8
Open Tender
Civil Works
Lump-sum
540 days
Bhuj
Please see tender documents
9 documents required · 9 mandatory
₹3,000
GE Army Bhuj
₹8.9 L
Yes
Jodhpur
5 May 2021
26 Feb 2021
19 Apr 2021
26 Feb 2021
17 Apr 2021
10 Apr 2021
18 Mar 2021
Amount
Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from S Page No. 27 (R)
Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 28
Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 29 (R)
Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 32 (R)
Lump sum price worked out by the contractor for "ROAD, HARDSTANDING & PATH" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 34 (R)
Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 36
Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 37 (R)
Lump sum price worked out by the contractor for "COMPOUND WALL/FENCING/GATE" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 39 (R)
Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 40
Lump sum price worked out by the contractor for "HOT WATER SUPPLY" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 41 (R)
Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 42 (R)
Lump sum price worked out by the contractor for "LIGHTNENING PROTECTION" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 43 (R)
Lump sum price worked out by the contractor for "MH RETROFITTING" as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 48 (R)
Sch 'A' PART-XIV (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.
INTERNAL WATER SUPPLY S&F 15mm bore CP brass bib cock screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Cat No QQT-7037 or techno commecial equivalent of other make
S&F 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Cat No QQT-7053 or techno commecial equivalent of other make
S&F CP wall mixture 3 in-1 system including 1.50m long tele shower and overhead shower of size 150x150mm with W.F. ISI Marked Make jaquqr Cat No 7281 or techno commecial equivalent of other make
S&F over head Shower rose 150x150 mm of ABS Body chrome plated with grey face plate & with arm having swivel joint cromium plated best quality Make Jaquar or techno commecial equivalent of other make
S&F 15 mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout all as per sample Make JAQUAR or techno commecial equivalent of other make
S&F health foucet Make Jaquar ALD-573 or equivalent with 1200mm long flexible mild steel tube 80mm dia with wall hook and complete all as specified and as directed and approved by Engineer-in-Charge.
S&F two way angle cock cromium plated fancy type 15 mm bore /size Make JAQUAR Queen series QQT or techno commecial equivalent of other make
S&F 15mm bore CP brass bib cock screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Essco Serices or techno commecial equivalent of other make
S&F 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Essco series or techno commecial equivalent of other make
S&F CP concealed stop cock 15 mm bore complete Make jaquqr Essco Series or techno commecial equivalent of other make
S&F over head Shower rose 100x100 mm of ABS Body chrome plated with grey face plate & with arm having swivel joint cromium plated best quality Make Jaquar or techno commecial equivalent of other make
S&F jet spray was system chromium plated steel body with f;exible pipe complete all as specified and as directed and approved by Engineer-in-Charge.
INTERNAL ELECT SUPPLY S&F bell ding dong AC, 230 volts single pole complete all as specified and directed. Make : Anchor/Havell's or other equivalent
S & F deluxe electronic ceiling fan regulator rotatry type, four step 120/240 Volt and connecting all as directed.
S&F of elegantly industrial general purpose box type luminaire, 1x16Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 18 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.
S&F of elegantly industrial general purpose box type luminaire, 1x16Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic ballast, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 16 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.
Supply and fix angular holder alongwith back plate fixed on wall / ceiling complete with LED - 15 Watt 6500K etc all as specified and directed.
S & F 9W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.
Supplying, fixing, connecting & testing energy efficient LED street light fitting having nominal power consumption 45 watt with lamps, IP protection 65, with surge protection not less than 10 KV including suitable GI pipe light grade, 1.5 Mtr long bracket made to shape and size with and angle of 120 degree fixed to poles etc with two nos of suitable clamps and Nuts and connecting to ceiling rose with using 2.5 sqm aluminium conductor PVC insulated twin core weather proof cable etc complete all as specified and directed.
Supply and fix Weather Proof PVC Junction Box made out of not less than 2 mm thick of size 250x200x100 mm (approx) complete with hinged door locking arrangement and consisting of 01 No panel mounted connector 4 pole 32 A - 01 No MCB SP 06 Amps 10 KA - 01 No, confirming to IP 65 complete including fixing on street light pole with MS Clamps, bolts, nuts and washers all as specified and directed by Engr-in-Charge. Note : The rate quoed inculdes cost of MS Clamps, bolts, nuts and washers
Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size for replacement.
Supply & fix in repairs sheet metal enclosure powder painted for MCB DB TPN 4 way double door vertical type with IP-43 protection with Din rail and busbar with MCB as incomer complete all as specified.
Taking down existing ceiling/exhaust fan of any size refixed duly servicing & painting in existing/new postion complete all as specified and directed by Engr-in-charge.
Taking down carefully aluminium submain wiring /cable including steel/PVC conduit complete and making good disturbed surfaces of walls, floors etc complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’ (ii) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B1 cover 50mm thick reinforced with 8mm dia TMT bars @ 150mm C/C both ways, funnel with watering pipe
Supply & fix MCB SP 230V, 'C' series, 6Amp to 32 Amps 10 KA rating ISI marked and connecting complete all as specified.
Supply & fix MCB SPN 230V, C series, 6A to 40Amps 10 KA rating ISI marked and connecting complete all as specified.
M & L for sand cushioning to UG cable using river sand locally available and gently punning to cushioning to cable complete all as specified and directed. Note : For the prupose of payment only punned thickness will be measured).
Supply and fix angular holder alongwith back plate fixed on wall / ceiling complete with LED - 15 Watt 6500K etc all as specified and directed
Supply and fixing energy saving 9 watt LED bulb all as specified and directed
Supply and fixing decorative mirror type LED tube light fitting 1 x 9/10 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sqmm size complete all as specified and directed
Supply and fixing decorative box type LED tube light fitting 1 x 20/18 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessoreis internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sqmm size complete all as specified and directed
S & F heavy duty exhaust fans of 250mm sweep suitable for SP 230/250 v 50 Hz AC supply comploete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed
S & F heavy duty exhaust fans of 300mm sweep suitable for SP 230/250 v 50 Hz AC supply comploete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connectiong with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductor from ceiling rose to fan complete all as specified and directed
S & F 12 watt LED porch light complete all as specified and directed
S & F 36/40 w slim design LED recessed full open 2x2 tile, glare free uniform illumination with integral driver all as specified and directed
S & F ceiling fans 1200mm sweep energy efficient five star rated including rods and connecting up with 3 runs of 1.5 sqmm single core PVC insulated but unsheathed, FRLS cable with multistranded copper conductors IS 694 marked from ceiling rose to fan complete all as specified and directed
S & F LED security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver upto 10 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistranded copper conductor sheathed cable of size 1.0 sqmm fixed with & copper conductor sheathed cable of size 1.0 sqmm fixed with & including bracket made of GI pipe 25mm bore light grade, 1.2 mtr long bent to shape required with 02 Nos MS clamps of suitable size and length nuts & bolts complete all as specified and directed
NOTE FOR ITEMS OF LED LIGHTS :- (i) The LED lights shall have guarantee for 5 years from date of completion of contract, any defects noticed during this period shall be rectified/parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer shall be accredited to NABL.
Supply and fixing MCCB Distribution Board suitable for 125 AMP TPN 4 way distribution board, concealed fluch to wall for mounting MCCBs and MCBs, factory made, fabricated out of CRCA sheet not less than 1.20mm thick fitted with DIN channel, neutral link, DBs shall be semi glossy finished with epoxy polester based poeder paint process to ensure smooth finish and protection against corrosion atmosphere, the DBs shall be double door type with hinged door with locking arrangment, the DBs shall be of same make as MCCBs. DBs shall also be provided with lable marking indicating the incoming and outgoing circuits on all ways specified, the DBS shall be IP 43 protection class or the following :-
S & F MCBs, 10 KA rupturing capacity, IS-8828 marked of the undermentioned type and rating and fixing in DBs complete all as specified and directed for the following :-
MCB SP 6 TO 32 AMP
SPN MCB 40/32 AMP
Sub main wiring with two runs of 4.0 sqmm size main cable and one run of 4.0 sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi stranded copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fitting/ accessories all fixed to the surface of wall/ceiling complete all as specified and directed
Sub main wiring with two runs of 6.0 sqmm size main cable and one run of 6.0 sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi stranded copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ ceiling complete all as specified and directed
Sub main wiring with four runs of 6.0 sqmm size main cable and two run of 4.0 sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi stranded copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ ceiling complete all as specified and directed
M & L for sub main wiring concealed type with 2 runs of 4 Sq.mm for phase, neural and 2.5 Sq.mm for earth continuity PVC insulated unsheathed cable FRLS grade with copper conductor single core multi stranded 1100V grade confirming to IS - 694 drawn through and including medium grade concealed conduit of size not less than 25 mm dia including accessories , junction boxes etc,. cutting chases and making good in CM 1:3 including connecting all as specified and directed. Note- Two run of wire 4 Sqmm and one run of wire 2.5 sqmm and one run of PVC casing caping 25mm dia will be measured as one length. Note for submain wiring items : The above mentioned specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall bemeasured as one run length. The small extra lengths required for loops etc for connection in DBs are deemed to the included and only the cable covered in conduit shall be measured.
S & F TV/Telephone socket outlet, including, MS Box of size 100x100x65mm with cover plate complete all as specified and directed (includes 2 No of TV and 2 Nos of telephone for officer and 111 TV points for ORs and civilian)
S & F 25 litres capacity geyser storage type 5 star rating with necessary holes in walls with drilling machine and grouting foundation nuts and bolts in wall and doing necessary connecting work and making all electrical connections complete all as specified and directed by Engineer-in-Charge
M & L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized iron strip earth 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of protection pipe galvanized iron 40 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete as detailed below and all as directed.
M & L for powder coated aluminum grill of design No DG-104, 6.5mmx4.5mm Section of decogrill or of equivalent approved make with 1 mm thick 'F' sections of suitable size complete all as specified and directed by Engg in Charge.
M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.
Taking down existing water proofing treatment and M & L for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.40 ltr /sqm and laying grit finish Actetic Polypropylene (APP) modified membrane pre-fabricated , reinforced with non woven polyester , of 3.50 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps etc all as specified.
M&L guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC/CICO/PIDILITE)@ 2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness 30 mm all as per manufactureres instruction.(Upto 7 m height)
M&L WMM 150 mm thick (compacted thickness) in two layers conforming to the grading given in table 400-13 & physical requirement given in table 400-12 spread with mechanical means & rolle by using8-10 ton vibratory power roller over compacted sub grade surface as specified in clause 406.3.5 of MORTH & H specification complete all as specified & directed.
M & L for construction of new PCC solid masonary valve chamber of size 1000 x 800 x 1000 mm (internal dimensions) with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate 150mm thick 150mm wide off sets alround over 100 mm thick hard core, 200mm thick PCC solid block walls built in CM 1:6 50mm thick PCC 1:2:4 type B1 (1:6) finished even and smooth, without using extra cement internally including top of floor including excavation earth work in hard/dense soil 3mm thick MS sheet cover fixed on 25mm x 25mm x 6mm thick angle iron frame with hold fasts embeded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two caots of synthetic enamel paint over one coat of primer including disposal or surplus soil to a distance not exceeding 50 m etc complete all as specified and directed
S & F CI wheel as rollers of 80mm dia for gates
S & F cattle trap made out of mild steel sections such angle, channel, frame & 50mm dia GI pipe all as specified and directed
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches ceiling roses, pendants, regulators, sockets, light fittings
Supply, Install, testing and commissioning of 'Solar Hot Water System' (Flat Plate Collector) based on indirect transfer of heat of capacity 400 LPD with electrical heating back up to 3KW electric connection from DB with 4 Sqmm copper cable complete all as specified and directed.
Supply, Install, testing and commissioning of 'Solar Hot Water System' (Flat Plate Collector) based on indirect transfer of heat of capacity 500 LPD With electrical heating back up to 4KW electric connection from DB with 4 sqmm copper cable complete all as specified and directed.
ARBORICULTURE Supply and ploughing the following species of well grown healthy tree sapling with good root system & height as mentioned below and M&L, excavating a pit of size (450mm x 450mm x 300mm) pit, refilling with red earth mixed with manure in the ratio of 3:1 by volume in addition 2 Kg of neem khali/cake, cowdung including watering and spraying pesticides etc as specified. Note : Height of the plants at the time of plantation shall be 4 to 5 feet
Neem or Limbdo
Mango
Nariyal- Cocon
Chicoo
Jamun
S&F tree guards made of welded steel wire fabric (150x100) supplied and fixed complete to wood or steel members and supported with flat iron (25x5x6) fillet (for securing the mesh) and three legs in angle iron (30x30x5) welded to the tree guard below and inserting it into ground all as specified and directed and preparation of new surface and priming with red oxide zinc chrome and applying two coat of paint with synthetic enamel (ordinary tint) including earthwork and PCC 1:3:6 type C1 complete all as specified and directed.
Note applicable for item No 74.00 above Contractor's quoted rate shall include the regular maintenance of trees specimen plants and other similar plants till the completion of 01 year maintenance period including replacement of dead plant of same height and including watering, trimming, pruning, hoeing, weeding stacking applying insecticide and necesssary manure etc cleaning of nearby area and disposal of waste away from site, quarterly enrichment with manure @ 0.015 cum per pit with minimum 03 visits per month or as directed by Engineer in Charge
M&L for non skid ceramic Coloured tiles, 300mmx300mmx6mm to7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.
M&L digital desiner glazed ceramic coloured tiles (300x450 mm) x6mm to 7mm thick on vertical surfaces such as skirting, dados, & riser to steps, set & jointed in neat cement slurry & pointed in coloured cement to match the tile colour laid over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.
Supply only 20mm dia PVC pipe hight quality for purpose of horticulture complete all as specified and directed.
Complete demolition of toilet block of SM Barrack (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg Nos P-258, P-264 & P-271
Complete demolition of toilet block of SM Barrack (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg Nos P-259, P-260, P-261, P-263, P-266, P-267, P-268, P-269 & P-270
Complete demolition of Single JCOs (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-49)
Complete demolition of Cook House & Dining Hall (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-45)
Complete demolition of MI Room (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-37)
Complete demolition of JCOs Mess (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-48)
Complete demolition of Adm Block Connecting Passage (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge
Complete demolition of Guard Room (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-29)
Complete demolition of Lavatory Block (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-50B)
Complete demolition of Offrs Mess (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-75)
Complete demolition of Tradesmen Shop (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-46)
Complete demolition of Garage with Inspection Pit (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-13)
Complete demolition of Ration Store (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-47)
Complete demolition of POL Store (on As in where in basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-57)
PROVISIONAL LUMP SUM (PLS) Provide Provisional lump sum for M&L for construction of Rain water harvesting Pit of 3.00 metre dia and 5.5 metre depth (05 Nos) complete all as per Drg No CEBZ/TD/50/2011 complete all as specified and directed
NOTE FOR ITEM NO 95.00 (1) Provisional lump sum shall be expended wholly or in parts as directed by GE. The works under Provisional Lump Sum shall be measured and paid for at applicable rates in MES SSR 2010 Part-II subject to percentage ( + or - denomination) computed under last column of this schedule above/below the provisional lump sum price worked out by the MES. (2) For details refer relavent TD drawings.
RAGHUSONS INFRA ENGINEERING PVT. LTD
FRIZO INDIA PVT LTD
Jeet Construction
RAMDEV CONSTRUCTION CO.
M/s. Shiva Engineers
MADAN MOHAN JAIN sons
SOOD ASSOCIATES PVT LTD
SHRI GURMUKHDAS CONTRACTORS PVT. LTD.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .