SPECIAL REPAIR TO TOILET AND BATHROOM BLOCK OF OTM ACCN BLDG NO P 05 P 06 P 07 P 36 P 77 AND P 78 AT MIL STN BHUJ UNDER GE (ARMY ) BHUJ

Amount

M&L for machine cut Kota stone slab 20 mm to 25 mm thick, as in slab/plateform and thread for steps set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish incl dismantling existing slabs complete all as specified and directed.

M&L Granite slab 20mm thick machine cut, bedded and joined with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps & rounding off the exposed edges incl dismantling existing slabs all as specified and directed..

M&L non skid ceramic Coloured tiles, 300mmx300mmx6mm to7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 incl dismantling existing tiles complete all as specified and directed.

M&L digital desiner glazed ceramic coloured tiles (300x450 mm) x6mm to 7mm thick on vertical surfaces such as skirting, dados, & riser to steps, set & jointed in neat cement slurry & pointed in coloured cement to match the tile colour laid over and including 10 mm thick backing coat in cement mortar (1:4) incl dismantling existing tiles complete all as specified and directed.

S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with 20mm bore float valves and ball valveand including all fittings and fixtures in repairs incl dismantling of existing tanks complete all as specified and directed.

S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, white in colour hoisted and fixed in position with 20mm bore float valves and ball valve and including all fittings and fixtures in repairs incl dismantling of existing tanks complete all as specified and directed.

S&F in Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick/Stone work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement incl taking down the existing damaged plastering complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")

Supply only water proofing compound (ISI Mark)

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick/Stone work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement incl taking down the existing damaged plastering complete all as specified and directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement incl taking down the existing damaged plastering complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying 2 coat of acrylic exterior anti fungal emulsion paint over a coat of primer complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emlusion white or tinted over a one coat of wall care putty on walls complete all as specified and dircted by Engr-in -Charge

M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm all as specified

S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rai ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in MS frame welded/sealed to the style and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F 100mm long aluminum anodized barrel tower bolts of extruded section and fixed.

S & F butt Hinges, medium weight, stainless steel,100 mm size complete all as specified.

S&F extruded aluminum alloy handles 150 mm size fabricated type anodized all as specified.

S & F 300 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sjeet, cast or extruded sections or cast aluminium alloy.

S&F in repair brass chromium plated shower rose 125mm size with swivel joints including fixing to steel pipe or union.

S&F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding including taking down existing unserviceable WC of any discription and in any position & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S&F Vitreous China, wash down water closet pan "Pedestal pattern" white including connection to drain and to flush pipe and anti syphonic pipe including all joints and making good the disturbed surfaces complete all as specified.

S&F in Repairs PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle, flush pipe of polyethylene pvc 32mm dia high or low density including brackets complete all as specified and directed.

S&F (concealed / open) 16mm outer dia UPVC pipes & fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 15mm bore..

S&F (concealed / open) 20mm outer dia UPVC pipes & fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 20mm bore.

S&F (concealed / open) 25mm outer dia UPVC pipes & fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 25mm bore.

S&F (concealed / open) 40mm outer dia UPVC pipes & fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 40mm bore..

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints incl taking down the existing fixed on walls complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls incl taking down the existing complete all as specified and directed

S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore, any radius complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal with access door, 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) branch piece, double (double Y) equal or unequal with access door, 110 mm bore, complete all as specified and directed.

M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

M&L for PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.

M&L mild steel in framed work [Fe-410-W (grade 250) quality A] as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing+B191and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed.

S&F vitreous china urinals, bowl type flat back, as ordered , minimum size of 465 x 355 x 265 mm, white, with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement incl waste pipe complete all as specified and directed.

S & F in repair vitreous china wash basin,white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe incl Waste Pipe complete all as specified and directed .

S & F grating square 150mm size of PTMT (minimum weight 100) complete all as specified and directed.

S&F PVC (SWR) floor trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified .

S&F Stop valves, cast copper alloy, ISI marked ,screwed down high pressure with crutch of butter fly handle, fancy type , chromium plated,with long shank and cup, screwed both ends for iron pipes or for union , for 15 mm bore , , fixed in repair , complete all as specified and directed.

S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified

M&L for special treatment of sunken portion of WCs and Bath room as per following stages: Note: Flat Plan area shall be measured Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc . Stage 2:- Providing 10mm thick plaster in CM 1:3 with chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd(and allow to dry for 8 hours) under touch dry condition Stage 4:- Applying two coats of water proofing decorative elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP(The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufactutrer instruction Stage 5:-Filling the Same Portion with plain concrete 1:4:8 Type D-2 Stage 6:- Making holes in wall and fixing 600mm long 40mm dia GI spout for draining the surplus water if any.

M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as 75mm thick finished fair all as speificed

M&L for false ceiling work of galvenised MS ceiling grid system 'UNLOCK" comprising of main runner 38mmx24mmx0.35mm cross tee 38mmx24mmx0.25mm and GI suspenders 4mm dia fixed to ceiling with and including supply and fixing mineral fibres acoustic ceiling board of size 600x600x12mm thick complete all as specified and directed and fixed as per manufacturers instructions including taking down existing ceiling of any discription and in any position and making good the disturb surfaces to match with the existing surfaces and finishes

S&F stainless steel health faucet witrh 1 Mtr tube and hook complete all as specified and directed ny Engr-in-charge. Confirming to Cat part No ALD573 of jaguar/PRAYAG or equvilent completed all as specified

S&F in repair 2 Way Bib Cock (Make Jaquar FUS-29041 2-way Bib Cock with Wall Flange or equivalant)

S&F in repairs Wall mounted pedestal pattern water closet with seat cover and inbuilt flush tank (Make Jaquar Cat No CNS-WHT-WS11 ) Extd. Wall Hung Size (mm) 775 x 360 X 660 Also available in Soft Closing Seat Cover)

S&F in repairs counter sunk wash hand basin with waste coupling (Make Jaquar Cat No CNS-WHT-WB02 Wash Basin Size (mm) 185 x 450 x 355 and & ALD-705 (wasteCoupling 32mm dia) or equivalant)

S&F in repair 15mm bore fancy type swan neck pillar tapcast copper alloy chromium plated, screwed down high pressure, iron pipe and fixed (Make Jaquar Cat No FUS-29001 Pillar Cock or equivalant)

S&F in Repair Chromium plated Brass 60 cm longTubular towel rail complete all as specified.

S&F in repair soap dish & holder , colour chrome, brass holder fittings fancy type complete all as specified and directed

M&L for precast cement concrete block masonry with solid blocks of PCC (1:5:8) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

Demolition of pre-cast concrete block masonry built in cement mortar of any description in any position complete all as directed by Engr-in-Charge.

M&L for PCC (1:3:6) type C2, (using 40mm graded stone aggregate) as in plinth protection, 75 mm thick, finishing the surface even and smooth w/o using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil as specified & as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm

Removing excavated soil not exceeding n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed

M & L for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying grit finish Actetic Polypropylene (APP) modified membrane pre-fabricated , reinforced with non woven polyester , of 3.50 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps etc over 10mm thick in CM 1:3 rendering and 40mm thick levelling course of PCC(1:2:4) also removing the existing roof treatment and hacking the smooth concrete surface incl discoonecting all sanitary fittings, tank connections and refiitting as it as after completion of roof treatment work complete all as specified.

S & F in repairs PVC mirror cabinet witth front mirror, size 330x430mm minimum 5 compartment all as per sample kept in GE office. Make : (Make : Prayag Cat No 551 or equivalent design) PRAYAG/Polytuf/Sintex

Dismantaling and taking down copper / aluminium point wiring any type / size complete with removing all connection and accessories such as switches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of fitting , batten , steel or PVC conduit , casing caping etc compele and making good the disturbed surface.

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit pipe of adequate size concealed type on any type of wall / fixed to surface ceiling with PVC rawl plugs with sunken type pressed steel terminal box suitable for laminated board or Modular fititng board and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of concealed flush terminal metal box, any module white frame and connected accesories

(a) One light point controlled by one way one switch SP 5 Amps ,240 V.

(b) One Exhaust fan point controlled by one way one switch SP 5 Amps, 240 V.

(c) One switch socket outlet 3 Pin, 5 Amps, SP on independent board.

All as per the above item No 2 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet.

S&F modular switch one way 6 Amps , 1 module type complete .

S& f modular socket , 6 Amps , 2/3 pin combined 2 module complete.

S& f modular switch 16 Amps , combined 2 module complete.

S& f modular socket combination, 6 Amps / 16 Amps , 2/3 pin combined 2 module complete.

S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete

Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting upto PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirement and 2 Nos of round or square PVC bolck for fixing of FTL fitting complete all as per directed by Engr-in-charge.

Supply and fixing of mirror light of capacity 1x10 Watt epoxy white powder coated CRCA sheet steel housing with acrylic diffuser gaskat with all fixing acessories complete all as specified and directed.

S&f angle holder backlite with 1x11 Watt LED Bulb with fixed on hylum sheet including all fixing acessories and making of connection with twin core flexible copper conductor from ceiling rose to fitting complete all as specified and directed.

Supply and fix exhaust fan, Plastic body AC single Phase. 230V of size 300 m sweep with, blades, and frame and louvers complete including making suitable size hole in any type of wall and thickness all as specfied and dircted .

Supply and lay pipe uPVC pipe including fittings of size 50 mm (2.0") dia complete all as specified and directed

Supply and lay pipe uPVC pipe including fittings of size 25 mm (1.0") dia complete all as specified and directed

M&L for cutting of existing DI/CI pipe line in position for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including necessory exvation and earthwork, dewatering etc,if any involed, complete all as specified and directed for 50 / 100 mm bore of pipes

supply and fix ball valve 25 mm dia including all fittings all as specfied and directed

Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete as sepecified.

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm.

Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point.

M&L for sub main wiring with two runs of 2.5 Sqmm (2x2.5 sqmm )1100 volts grade single core FR PVC insulated unsheathed multistranded copper conductorcable confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in walls/roofs/floors etc with one run of 2.5 Sqmm (1x2.5 sqmm ) single core FR PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and directed. Note:- 2 runs of 2.5 Sqmm ,one run of 2.5 Sqmm cable and one meter of concealed conduit will be measured as one unit again.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

machine vision plus

M/s Bombay Novelty Stores