SPECIAL REPAIR TO CERTAIN BUILDINGS UNDER AGE B/R-I UNDER GE ARMY BHUJ

Amount

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and S & F Coloured Glazed Ceramic tiles (Digital Designer tiles) of size 450 mm x 300 mm and 6-7 mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and S & F non skid ceramic coloured tiles square / rectangular area of each tile exc 0.06 sqm but not exc 0.11 sqm and 6 - 7 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and S & F non skid ceramic joint free coloured matt finish tiles square / rectangular area of each tile exc 0.18 sqm but not exc 0.38 sqm and 7 - 8mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and S & F non skid ceramic coloured matt finish tiles square / rectangular area of each tile exc 0.18 sqm but not exc 0.38 sqm and 7 - 8mm thick as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Dismantling timber scantlings 40sq. cm and over in section, framed in any position and removing from site complete all as specified and directed.

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. and M & L for precast cement concrete block masonry with solid blocks of PCC (1:5:8) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed exc 10cm in width and set and jointed in C M 1:6 complete all as specified and directed.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls / celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster and disposing off the rubbish off the premises of cantonment complete all as specified and directed.

Supply only water proofing compound (ISI Mark) complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

S & F in repairs Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

S&F for 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density ball screwed for iron pipe and fixed complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing rubbish off the premises of cantonment complete all as specified and directed.

M& L for Providing precast reinforced cement concrete (1:2:4) Type B-0 (using 12.5mm graded aggregate) as in louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame in cement mortar (1:4) (Note: The quoted rate including for reinforcement and Pre cast frame in this item)

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in plinth protection finishing the surface even and smooth w/o using extra cement including forming & filling expansion joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position from the opening of size not exceeding 1.50 sqm each with shutter i.e. without taking off shutter from the frames complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position from the opening of size exceeding 1.50 sqm but not exceeding 4 sqm each with shutter i.e. without taking off shutter from the frames complete all as specified and directed.

S & F for anodised Aluminium door frame of size 100 x44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98mm thick, bottom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 x 44 x1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stopper, tower bolts 200mm, sliding door bolt 300mm or mortice lock with 5mm thick tinted glass /pre laminted particle board (Novapan) panel and making good to the disturbed wall surfaces to match existing surface complete all as specified and directed.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.Note : Making all edges i.e. cill and jamb good by cement mortar 1:3 complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in the opening as per the specifications and drawing mentioned in section 8 of SSR-II complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per the specifications and drawing mentioned in section 8 of SSR-II complete all as specified and directed.

S & F 30 mm thick factory made IInd class hard wood (not less than Hollock wood) glazed and skelton shutters open rebated and prepare to receive glass / gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc {size of members of shutters as specified in clause 8.24 (a) of section 8 of SSR - I} supplied and fitted to chowkat complete all as specified and directed.

S & F 35 mm thick factory made IInd class hard wood (not less than Hollock wood) glazed and skelton shutters open rebated and prepare to receive glass / gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc {size of members of shutters as specified in clause 8.24 (a) of section 8 of SSR - I} supplied and fitted to chowkat complete all as specified and directed.

S & F 35 mm thick factory made Flush shutters solid core construction with block board core and plywood face panels commenrcial face on both sides with lipping / frame to match with and including preparation of the surfaces complete all as specified and directed.

S & F 30 mm thick factory made Flush shutters solid core construction with block board core and plywood face panels commenrcial face on both sides with lipping / frame to match with and including preparation of the surfaces complete all as specified and directed.

S & F 200 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F aluminum alloy handles 150 mm size fabricated type anodized complete all as specified and directed.

S & F butt hinges 100 mm long mild steel medium weight cold rolled complete all as specified and directed.

S & F aluminium alloy, anodized sliding door bolt of 300 mm length with hasp and staple (clip type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S & F for Welded steel wire fabric of weight exc 3.5Kg/Sqm but not exc 4Kg/Sqm, fixed to steel members with spikes complete all as specified and as directed.

S & F in repairs heavy duty Stainless steel (Grade 305) curtain rods 20 to 25mm dia complete all as specified and directed .

S & F in repairs Stainless steel (Grade 305) brackets (Open ends) suitable for curtain rods of 20 to 25mm dia complete all as specified and directed .

S & F in repairs Stainless steel (Grade 305) brackets (Dead ends) suitable for curtain rods of 20 to 25mm dia complete all as specified and directed .

S & F in repairs Stainless steel (Grade 305) supports suitable for curtain rods of 20 to 25mm dia complete all as specified and directed .

S & F in repair vitreous china wash basin,white flat back, size 550mmx400mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe including PVC connections 15mm size with PTMT nuts of length 600mm long complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar and M & L for machine cut pre-polished Kota stone slab 20 mm to 25 mm thick, as in slab/plateform set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing to give mirror finish complete all as specified and directed.

M & L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) including necessary form work as in flooring and finishing the surface even and fair without using extra cement complete all as specified and direccted.

M & L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in sub base and finishing top surface even and fair complete all as specified and direccted.

S & F 80 mm thick, machine made, Ist quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles of triangular / zigzag / hexagonal / I in shape or shape and designe as approved with grey cement and pigment conforming to IS-15658-2006, M-40 grade laid over and including 25 mm thick sand cushioning and the voids shall also be filled with fine sand complete all as specified and directed.

M & L for mild steel framed work [Fe-410-W (grade 250) quality A] as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other coverings, doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M & L for mild steel roof trusses (framed) trusses purlins and fastening (etc.,angle, channel) or flat section including distance pieces, MS plates / gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 quality A also fastening and fixing complete all as specified and directed.

S &F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Gde of steel Fe 410- W (Gde-E250) Quality B also fastening and fixing complete all as specified and directed.

Dismantling plain or corrugated A C or steel sheeting any guage, of any description and in any position as in roof coverings and S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.45 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self taping screws complete all as specified and directed.

Dismantling plain or corrugated A C or steel sheeting any guage of any description and in any position as in roof coverings and S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridge etc fixed with self taping screws complete all as specified and directed.

S & F in repair soap dish of 1mm thick stainless steel box type fixed with screws of size 150x150x100mm complete all as specified and directed.

S & F in repair for plate rack made out of stainless steel of size 31 inch X 30 inch X 10 inch complete all as specified and directed. Make Prayag Cat No P-346 or equivalent of Polytuf/Sintex

S & F in repair for grating square 150mm size of PTMT (minimum weight 100) complete all as specified and directed.

S & F in repair Bib taps cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15 mm bore of GI Pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repair Stop valves fancy type chromium plated ISI marked cast copper alloy screwed down high pressure for 15 mm bore of GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified and directed.

S&F in repair for Pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long swan shanks and fly nuts screwed for iron pipe, 15mm bore fancy type complete all as specified and directed.

S&F in repair for shower rose brass chromium plated without swivel joints, 125 mm in size including fixing to steel pipe complete all as specified and directed.

S & F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Taking up or down existing unserviceable mild steel water tubing and connections 15 mm dia, any grade, of any description or in any position including fittings and S & F (concealed / open) 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Taking up or down existing unserviceable mild steel water tubing and connections 20 mm dia, any grade, of any description or in any position including fittings and S & F (concealed / open) 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

M & L for Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M & L for Preparation of old decorated surface by complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty 3mm thick and pereparation of surface for further treatment and applying two coat of distemper oil emulsion paint white or tinted complete all as specified and directed.

M & L for Preparation of old decorated surface by complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface and applying two coats of acrylic weather proof paint (Exterior grade) over a coat of primer on walls complete as all speifeied and directed.

M & L for Preparation of new painted surface of wood and wood based material any description and in any position over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for Preparation of new painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for false ceiling work of galvenised MS ceiling grid system 'UNLOCK" comprising of main runner 38 mm x 24 mm x 0.35 mm cross tee 38 mm x 24 mm x 0.25 mm and GI suspenders 4 mm dia fixed to ceiling with and including supply and fixing mineral fibres acoustic ceiling board of size 600 mm x 600 mm x 12 mm thick complete all as specified and directed and fixed as per manufacturers instructions including taking down existing ceiling of any discription and in any position and making good the disturb surfaces to match with the existing surfaces and finishes complete all as specified and directed.

M & L for 10mm thick plaster in one layar in cement mortar (1:4) on concrete surfaces over roof slab finished surfaces even and smooth without using extra cemet over and including application of cement slurry @ 3kg/Sqm after cleaning, sweeping the old RCC slab to remove dust before application of plaster complete and M & L for water proofing treatment to roof slab by one coat of bituminous/polymerised primer conforming to IS 3384 @ 0.30 Ltr per Sqm and laying Acretic Polypropylane (APP) modified water proofing membrane weighing 3.5 Kg per Sqm with 3mm thick and minimum 75mm overlaps and minimum 100mm end laps sealed and bounded to the surface including finishing by applying aluminium paint @ 100 gram / sqm on roof or vertical surfaces complete all as specified and directed. [MAKE: SUPER THERMOLAY manufactured by M/S STP limited or MOPLY-FP manufactured by M/S Texsa India ltd or IWL (HYPERPLAS POLYSTER) manufactured by M/s IWL as approved by GE.]

S & F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms / sqm ) and fixed with aluminium wire staple complete all as specified and directed.

Hacking out old broken glass of any thickness and any description from metal frame including punching or drilling out old glazing pins / spring clips and S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.

Excavation in trenches in soft / loose soil not exceeting 1.5 Mtr wide and not exceding 1.5 Mtr in depth and getting out for taking out / laying of cables, erection of poles / strut / stays etc and not exceeding 10 sqm on plan complete all as specified and directed.

Returning, filling in the any type of soil including spreading, levelling, watering and ramming in layers not exc. 25 cms complete all as specified and directed.

Removing excavated material of any type of soil not exceeding 50 Mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I).

Supply & Laying un-reinforced precast concrete cable cover type-1 Class IV, size of 250 mm x 150 mm x 40 mm laid dry in trenches for under groung cable protection complete all as specifed and directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody ot for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring for One light/fan/exhaust fan/buzzer point controlled by one,one way switch with using 1.5 Sqmm (nominal sectional area) multi stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping/PVC Conduit of adequate size fixed on surface with PVC rawl plugs with and including Wooden Board/sunken type pressed steel terminal boxes of required size of not less than 1.6 mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit/casing capping complete for one light/fan/exhaust fan point controlled by one; one way switch. NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

All as per item No. 72 here-in-before but One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

All as per item No. 72 here-in-before but One 3 pin socket out let 5 amp point on the (same board) with other switches.

All as per item No. 72 here-in-before but with using 2.50 Sqmm size FRLS PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S & F ceiling rose, surface bakelite, 65X20mm three terminal complete all as specified and directed.

S & F switch piano flush button single pole230 / 250 volts one way 5 Amps Complete all as specified and directed.

S & F socket outlet 5 pin 5 Amp, flush type complete all as specified and directed.

S & F switch socket combination multi-purpose two in one, 3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S & F deluxe electronic ceiling fan regulator step type, four step 120/240 Volt, 100 Watts and connecting all as directed.

S & F of elegantly industrial general purpose box type luminaire metal body, 1x18 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic driver, spring loaded rotor type lamp holders, connected block with and including 01 No LED tube 16 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and incl fixing arrangement of PVC square box for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed. Make :Confirming to Cat part No IGP 131 LT8-16 of crompton greaves or equivalent of other specified make.

Supplying & fixing lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings incl 01 No LED lamp 14/15 watt 6500 K complete all as specified and directed.

Taking down carefully aluminium/copper submain wiring /cable including steel/PVC conduit complete and making good disturbed surfaces of walls, floors etc and M & L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm of voltage rating 1100 Volts drawn in and including surface casing and caping with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 2.5 Sqmm as earth continuity conductor Complete all as specified and directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

Supply, laying & testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, earthed of size 16 sqmm, 4 core laid in trenches / poles / fixed to walls etc complete all as specified and directed.

Taking down carefully MCBs, distribution boards/main switches of any type and size for replacement and Supply & fix for sheet metal enclosure powder painted for MCB DB SPN 8 way double door with IP-43 protection with Din rail and busbar Complete all as specified and directed. Make : Legrand Cat No. 5076 11 or equivalent of Havells/L & T/C&S

Supply & fix in repair MCB SP 230V 'C' series 6-32 Amps 10 KA rating ISI marked and connecting Complete all as specified and directed.

Supply & fix in repair MCB SPN 230V 'C' series 6-40Amps 10 KA rating ISI marked and connecting Complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. (The Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’. The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:2:4 type B1 cover 50mm thick reinforced with 8mm dia TMT bars @ 150mm C/C both ways, funnel with watering pipe.) Note :- The retreived materials have been mentioned in the Sch of credit in the tender documents in pdf form. The amount of Sch of credit will be deducted offline from the amount of BOQ at the time of acceptance.

M/S S. SINGH TRADERS