UNDERTAKING 600 HRLY ROUTINE OF BOTH OBMS ONBOARD IC-122

E-01 600 hrly routine of both OBMs (250 HP EFI) for IC- 122 is falling due. Routines to be carried out as per CG maintenance schedule. Following jobs to be undertaken (Spares-CG Supply). 1 Lubricate all lubrication points (lubricate more frequently when used in salt water) 2 Lubricate splines on the drive shaft and shift shaft 3 Replace water separating fuel filter – EFI models 4 Check tightness of bolts, nuts, and other fasteners 5 Change fuel filter 6 Change alternator belt 7 Check & lubricate trim cylinders & RC cables 8 Replace corrosion control anodes 9 Replace fuel primer bulb 10 Replace lower and upper mounts 11 Replace reed block 12 Replace roller guide bushing 13 Replace shift shaft bushing 14 Replace spark plug 15 Replace thermostat 16 Replace throttle cam bushing 17 Replace trim sender 18 Replace trim switch 19 Clean and clear water intake & replace water pump assembly 20 Service water pressure regulator 21 Spray anti-corrosion guard 22 Change gear case lube oil 23 Remove propeller & grease shaft 24 Check and top up power trim fluid