Earthing & Lightning Protection Tenders in West Bengal

Carbon Brush Assembly for Wheel Set Earthing Equipment (LHB) to RCF Drg. No. LW 71239 Alt-Nil and conforming to RCF Spec. No. EDTS 101 Rev-C, Amdt-2 and Corr.-7

Disconnecting & Earthing Device, 8 pole 2 way, without OFF, On load, 63 Amps, 750V AC (1000V insulation), 2NO+2NC with heavy handle and pad locking arrangement in Earth position without Stainless stee

RING OILER ASSEMBLY FOR WHEEL SET EARTHING EQUIPMENT ( FOR LHB TYPE COACHES) TO RCF DRG. NO.LW71241 ALT 'a' as per Drg.No. RCF DRG. NO.LW71241 ALT 'a' as per Specn. As per Drawing

DISCONNECTING & EARTHING DEVICE 125AMP, 8 POLE, 2 WAY, NO-OFF ON LOAD, 125A, 750V AC AUXILIARY CONTACT 4 NO WITH HEAVY HANDLE AND PAD LOCKING ARRANGEMENT WITHOUT STAINLESS STEEL ENCLOSURE SUITABLE FOR

25 KV AC, 1600 Amps Single pole Isolators with all accessories excluding Insulators and Earthing heal as per RDSO Specification No. TI/SPC/PSI/ISOLTR /0210 or latest. Make: RDSO approved sources.

DISCONNECTING & EARTHING DEVICE 125AMP, 8 POLE, 2 WAY, NO-OFF ON LOAD, 125A, 750V AC AUXILIARY CONTACT 4 NO WITH HEAVY HANDLE AND PAD LOCKING ARRANGEMENT WITHOUT STAINLESS STEEL ENCLOSURE SUITABLE FOR

Disconnecting & Earthing Device, 8 pole 2 way, No-OFF, On load, 63 Amps, 750V AC (1000V insulation), 4NO Auxiliary Contact with heavy handle and pad locking arrangement in Earth position without sheet

BRUSH HOLDER ASSEMBLY FOR WHEEL SET EARTHING EQUIPMENT FOR LHB TYPE COACHES TO RCFDRG.NO.LW71237 ALT. NIL as per FDrg.No.LW71237 Alt. Nil as per Drg.No. RCF.DRG.NO.LW 71237 ALT.NIL as per Specn. As pe

Disconnecting & Earthing Device suitable for 63A,750V AC (1000V Insulation),8POle,2Way No-OFF with Auxialiary 4NO + 2NC with heavy handle & pad locking arrangement in earth position and mounted in a S

Isolating Bush for wheel Set Earthing Equipment to RCF Drg. No LW-71244, RCF Specification No.EDTS 101, Rev-C. Material as per drawing & Material Test certificate should be submitted along with materi

Roof earthing switch (HOM), as per CLW specification NO CLW/ES/S-6/J and confirming to RDSO's Modification sheet No. RDSO/2012/EL/MS/0405 (Rev.- O) suitable for Electric Locos.

Set of Welding/Gas-Cutting Equipments i.e. Oxygen Cylinder Key, Gas PNM Cutter, PNM Gas Cutting Nozzle, Oxygen, LPG and CO2 Cylinder Regulator with gauges, LPG Adaptor, Holder for MWAW, Earthing Clamp

Set of Welding/Gas-Cutting Equipments i.e. Oxygen Cylinder Key, Gas PNM Cutter, PNM Gas Cutting Nozzle, Oxygen, LPG and CO2 Cylinder Regulator with gauges, LPG Adaptor, Holder for MWAW, Earthing Clamp

Sole bar bogie Earthing arrangement in BVZI wagon as per RDSO DRAWING No. -WD-072023-S-III. Item No. 1 to 7 and as per annexure-A attached. Firm's offered Make: Own.

Carbon Brush assembly for Wheel set Earthing Equipment of LHB Coaches as per RCF drawing No. LW71239, Alt-Nil. Material and Specification as per drawing in Malda Division. Accepted Make: SULTAN CARBON

Supply of CARBON BRUSH ASSEMBLY FOR WHEEL SET EARTHING EQUIPMENT [FOR LHB TYPE COACHES], TO RCF DRG. NO. LW71239, ALT. NIL, ITEM No. 1 TO 3.Accepted make brand-TECHNO CARBON, IM51

Earthing cable complete for LHB coaches to RCF drg. no. LW71249 Alt. c.Matl.&Spec. As per drg. Confirming to EDTS-101 Rev-C, Amndt.2, Corr. 7 Anex-1 Make/Brand: FERROVIA

Installation of 33 KV 2 PANNEL INDOOR type Terminal Arrangement with 36 KV Vacuum Circuit Breaker/SF6 Circuit Breaker along with other equipment and Supply and erection of 33 KV VCB earthing.

Electrical Installation work of proposed construction Hospital building and associated different type of quarters at Lumbini Park Mental Hospital at 115, Dr. G.S. Bose Road, Kolkata-39 -- Lightning Protection System and Compound illumination work

Electrical Installation work of sub-station incl. E.I work for SITC of DG set, Compound Lighting System, Lightning Protection System, Air-Conditioning,Glow sign boards at Integrated district court complex, Jhargram-- External Electrical Work

GE/BENG/43 OF 2021-22 REPAIR / REPLACEMENT /IMPROVEMENT OF OLD BURN OUT SUB MAIN WIRING TPN DBs EARTHING/FITTINGS ETC WITH ALLIED WORKS FOR OTM ACCN UNDER AGE E/M OF GE BENGDUBI MIL STN

REPLACEMENT OF CFL LIGHTS WITH LED LIGHTS AND REPLACEMENT OF LT PANELS AND SPECIAL REPAIRS TO EARTHING INFRASTRUCTURE FOR SMQs/OMQs AND OTM BUILDINGS AT AIR FORCE STATION SALUA UNDER GE (AF) KALAIKUNDA

Repairing of existing street light pole including painting, LED light, waterproof looping cable box change, Earthing, and new steel tubular pole at PCBL Truck Terminus under ward no. 30 of Durgapur Municipal Corporation.

REPAIR AND MAINT OF LT PANELS, SWITCH GEAR AND ALL TYPES OF SWITCH GEAR EARTHING POLE, PAINTING OF POLES AND REPAIR TO LT OVERHEAD AND LT UG CABLES AT BARRACKPORE UNDER GE BARRACKPORE

Installation and commissioning of 11KV 3phase overhead line with continuous earthing along with installation of 500KVA 11KV/550V power transformer and other allied jobs for supply power to water plant under Bankola Area.

REPAIR AND REPLACEMENT OF EARTHING UG CABLE FEEDER PILLAR BOX AND ALLIED WORKS AT CORPS CAMP AREA 3 TAC CMP MI ROOM HRDC AND OTHER NEARBY LOCATION UNDER AGE EM OF GE SUKNA

REPAIR MAINTENANCE OF UNSERVICEABLE POLES JUNCTION BOX CONTROL PANEL EARTHING FIXTURES HIGH MAST LIGHT AND UNSERVICEABLE SOLAR LIGHTS AND OTHER LIGHT WITH ALLIED WORKS AT VARIOUS LOCATION UNDER AGE EM OF GE BENGDUBI

REPAIR REPLACEMENT IMPROVEMENT OF OLD UNSERVICEABLE ALUMINUM WIRING MCB SP DP FOUR POLE FITTINGS REMOVAL OF EARTHING ETC AND ALLIED WORKS AT VARIOUS LOCATION UNDER AGE E M OF GE BENGDUBI MIL STN

Painting ,Earthing System and illumination of Head Gear Structure at Old SSP Pit No. 1 unit and Pit No.3 unit (Total 02 Nos. head Gear Structure) of Tilaboni Colliery under Bankola Area

Installation and commissioning of 3 Phase 11KV AB cable overhead line with continuous running earthing for feeding power to Electric Winder of 3 No. Pit winding Engine of Shyamsundarpur Colliery under Bankola Area

C/o of Platform/base and tubular shed, installation of pannel board with changeover switch, earthing etc. for 10 KVA Gen-set at BOP Rathidangaof 19th Bn. SSB Thakurganj under SHQ, SSB Ranidanga

REPAIR AND MAINT WORKS OF SERVICE CONNECTIONS, SUBMAIN WIRING, DISTRIBUTION BOXES, LIGHTENING CONDUCTORS, EARTHING, PANEL LIGHTS AND REPLACEMENT OF DEFECTIVE PARTS OF SUMMER AND WINTER APPLIANCES, STABILIZERS AND CONNECTED ITEMS AT VARIOUS LOCATIONS

Repairing of street lighting system by replacement of damaged loop box, faulty cable, earthing including repairing of pole at Meghmallar Sarani beside Jay Jayanti Sarani Bidhannagar ward no.-27 Under Durgapur Municipal Corporation

Earthing shunt made of copper mesh flexible wire, approx. length 1.5 feet, width 12 mm & thickness 1.5mm with suitable crimped end terminals, suitable for connection to RMPU unit of AC Coaches. MAKE/B

Modification of Wheel Set Earthing Equipment as per RCF Drg No. SKED-945 Set consistingof 9 items: 1. Stainless Steel Bush, L=l8mm, Thread size M12x1.75(outside)/M8X1.25 (inside) (Mat. AISI304) to mat

-EARTHING CABLE COMPLETE 70 SQ.MM (FOR LHB COACHES). as per Drg.No. RCF Drawing No.:-LW-71248, Alt-c, or latest. specn: Mat. Spec.:-EDTS 101, REV-C, Corr-10, AMND-4, or latest

Carbon brush holder assembly for wheel set earthing equipment for LHB type coaches RCF Drawing No.:-LW71237 Alt. Nil or latest Mat. Spec.:-EDTS 101, REV-C, AM-3 Corrignedum-10 or Latest

Set of Fasteners for Wheel Set Earthing Housing Modification as per Drg. No. SKED- 945. One set consist of Fasteners as Follows:- 1) Stainless Steel Bush, L=18mm, Thread size M12x1.75(outside)/M8X1.25

Set of spare parts of wheel set earthing equipment consisting of six items 1) Stainless Steel Bush, L=18mm Thread size M12x1.75( outside)/ M8X1.25(inside)( mat. AISI1304) to match with M8 Allen Screw,

Carbon Brush assembly for Wheel set Earthing Equipment of LHB Coaches as per RCF drawing No. LW71239, Alt-Nil and Attached PO of Malda Division. Make: SULTAN CARBON or Similar. Accepted make: PRINCEP

Disconnecting & Earthing Device, 8 pole 2 way,Without-OFF, On load, 63 Amps, 750V AC (1000V insulation ), 2 NO+ 2NC With heavy handle and pad locking arrangement in Earth position without Stainless St

RING OILER ASSEMBLY FOR WHEEL SET EARTHING EQUIPMENT TO RCF DRG NO : LW71241, ALT-a OR LATEST, CONFORMING TO RCF SPECIFICATION No. EDTS-101, REV.C, AMENDMENT No. 1, CORRIGENDUM-6 OR LATEST. Accepted

Clip assembly for wheel set earthing to RCF drg. no. LW71240 Alt 'a' confirmed to RCF specification EDTS 101 Rev C Amed.-2 Corr-6, Annx-1 Accepted Make /Brand: Firms Own Make

ISI marked Heavy Duty Earthing Clamp as per IS :2641(1989)., 600 AMP Capacity with braided Double Copper Shunt for welding cables cross section area 95 to 120 Sqmm.Make: ADORWELDING/ESAB/MESSER/PRIMA/

Earthing Cable Complete As per RCF drawing No. LW 71248. Alt-Nil or Latest and as per RCF Spec No. EDTS 101 REV-C Amendment 1, corrigendum 6 or latest. (Accepted Make. SELF )

Designing and printing of matter with pure leather binding of register as follows. A) Daily out turn register of LHB coaches for Earthing register, Phonic Wheel, Speed Sensor ( 500 pages) each. B) Dai

EARTHING CABLE COMPLETE TO RCF DRG. No. LW71248, ALT. NIL CONFORMING TO RCF SPECIFICATION No. EDTS-101, REV.C, AMENDMENT No.1, CORRIGENDUM-6 TO RCF DRG NO : LW71248, ALT : NIL. Firm's Own make.

Disconnecting & earthing device 125 Amp, 8 pole, 2 way, no-OFF on load, 125A, 750V AC auxiliary contact 4 No with heavy handle and pad locking arrangement without stainless steel enclosure suitable fo

EARTHING CABLE COMPLETE FOR LHB COACHES TO RCF DRG. NO. LW71249, ALT. NIL, ITEM No.1 TO 5, CONFORMING TO RCF SPECIFICATION NO. EDTS-101 (REV. C) AMENDMENT -1,CORRIGENDUM-6, Annexure-1

Earthing Resistance (Wire Wound Type) for earth fault detection control circuit. 100 W/390 Ohm +/- 10% used in SB1 in 3-phase locomotive as per CLW Specn No. :- CLW/ES/3/0014 Alt.C