Fabrication Tenders in Assam

Unbranded--CREATIVE FABRICATION AND STEEL FURNITURE Floor Standing Case or Storage Unit (unit with door) with 2 doors

Unbranded--CREATIVE FABRICATION AND STEEL FURNITURE Steel Bookcases confirming to IS 7761 Grade 0 of IS 1079 MS

Design fabrication printing supply installation and commissioning of display boards at P and U installations of Digboi Refinery

Design Engineering Supply Manufacture Fabrication Installation Testing and Commissioning of VRS for Existing Petroleum Storage Terminal at Guwahati

Custom Bid for Services - Fabrication of wash pipes (complete) for Drilling Services, ONGC, Jorhat for FY 2025-26 Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Mild Steel Welding Electrodes as per AWS: A 5.1: E 6013 & IS-814-1991: ER 4222 X or ERR 4221 X

Manufacturing and supply of Alumino thermic welding portions of 52Kg/60 Kg/60EI- R260 under the jurisdiction of Sr.DEN/II/TSK.

Fabrication of exhibit wooden cabinets strictly as per technical specification and drawings as mentioned in the tender

Fabrication and supply of SEJ 52 Kg as per Drawing No. RDSO/T-4160 with latest alteration No.7 .

Fabrication and supply of SEJ 52 Kg as per Drawing No. RDSO/T-4160 with latest alteration No.7 .

Fabrication and supply of SEJ 52 Kg as per Drawing No. RDSO/T-4160 with latest alteration No.7 .

Fabrication, Supply and Installation of Interior facilities at Sub-Regional Science Centre, Kokrajhar, Assam strictly as per the Councils specifications, drawings and quantities in Annexure-F.

Custom Bid for Services - HIRING OF PIPE WELDING SERVICES FOR UPCOMING PLANT SHUTDOWN DURING PROJECT HOOK-UP AT BCPL, LEPETKATA Similar Category Piping Erection Service

Custom Bid for Services - Rolling of Electrical Power Control Cable including Fabrication of MS cable drums at NRL site SOR item no 10, Custom Bid for Services - Rolling of Electrical Power Control Cable including Fabrication of MS cable drums at NRL ... including Fabrication of ... including Fabrication of ... including Fabrication of ... including Fabrication of ... including Fabrication of ...

Motor Driven Welding Generator (Q3) MSE Relaxation for Years Of Experience Yes | Complete Startup Relaxation for Years of Experience and Turnover No

Repair, fabrication and installation of RCC Test Lead Points (TLPs) for Mainline under Assam and West Bengal sector - Group A (Assam Sector)

Fabrication, Supply and Installation of Furniture and Partition Wall for the Innovation Hub, Jorhat Science Centre and Planetarium, Jorhat, Assam

Repair and Overhauling Service - FABRICATION AND MODIFICATION OF SEA WORTHY CONTAINER; REFURBISHED SEA WORTHY 20 FEET CONTAINER; Yes; Buyer Premises

ARC FOR ELECTRICAL RELATED MISCELLANEOUS STRUCTURAL FABRICATION JOBS UNDER REFINERY ELECTRIC SECTION COVERING THE REFINERY NTF ETP AND LDU AREAS

Fabrication, Supply and Erection of Pre Engineered Building, Roofing, Cladding and related Works for Central Workshop Building at NRL site

SUPPLY, FABRICATION, SHOP PAINTING, FINAL PAINTING, TRANSPORTATION AND DELIVERY OF FABRICATED STRUCTURAL STEEL AT PFCC- NREP SITE OF NRL, ASSAM

Custom Bid for Services - FABRICATION OF INDIVIDUAL OBSTACLES 2 SETS CONSISTING OF 20 STRUCTURES Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Repair, fabrication and installation of RCC Test Lead Points (TLPs) for Mainline under Assam and West Bengal sector - group B (west Bengal Sector)

Denting Work of TATRA Incl Labor Charge, Welding Work of TATRA incl Labor Charge, Painting Work of TATRA incl labor Charge, Marking Worl of TATRA incl Labor Charge, Upholster Work of TATRA incl Labor Charge

Explosive Van body fabrication with accessories fitting in new vehicle (pickup 4x4 drive) with chassis body (supplied) as per norms PESO and DGMS with Explosive Van Licence from PESO, Guwahati.

Supply and commissioning of Set of welding Plants as per specification attached. Firms offer - ADOR Power Tools and Accessories make accepted (Details attached)

Fabrication, Supply, Installation and Commissioning of Auditorium Chairs at Sub-Regional Science Centre (SRSC), Kokrajhar, Assam strictly as per the Councils specifications, drawings, layout in Annexure-F

Design, fabrication and supply, 1) Copper and SS made water cooled target holder, 2) Molybdenum shielding plate, 3) Hot pressed boron nitride (HPBN) sheets, 4) Molybdenum L-Plate and studs, 5) Tungsten L-Plate and studs, 6) K-type thermocouple wires

PROCUREMENT OF Armouring/ Fabrication (NIJ Level III) of 8 Nos. of Toyota Fortuner vehicles to be used for VIP/VVIP security.

Concept, Designing, Fabrication Commissioning and Management of AAI Pavilion at Srimanta Sankaradeva Kalakshetra, Exhibition Ground, from 19th to 21st Sept, 2024

Fabrication and supply of SS cages for 10 kg composite LPG cylinders at LPG Bottling Plant Abhoypur North Guwahati Assam 781031

Supply, Testing, Installation and Demonstration of Self-Standing Single Bore Porous Tube Manufacturing Unit (Hollow Fiber Fabrication Unit) at CSIR NEIST

RATE CONTRACT FOR FABRICATION OF 10KL 20KL 50 KL AND 70KL HORIZONTAL TANKS FOR DIVISIONAL OFFICES UNDER INDIANOIL AOD STATE OFFICE

Custom Bid for Services - Fabrication of Wheel Chocks for 24 Nos of WSS Units of Assam Asset Similar Category Support Services

Fabrication of Caged Enclosed Storage facility with roof CGI Sheet (Q3), Fabr of movable platform wrought Iron trolley to facilitate smooth shifting of Storage bins (Q3), Fabr of overhead roof shelters CGI sheet based for Storage of Tech Spares 20 into 21 (Q3)

Covered Electrodes for Manual Metal Arc Welding of Stainless Steel and Other Similar High Alloy Steel (V2) conforming to IS 5206 (Q3) (3 (3 ))

Supply of 200 mm Fabricated M.S. Foot Valve Manufacture by HANDMADE M.S. PLATE CUTTINGB WELDING ,LEDER GASKIT PAINTING COMPLETE Make:-TATA STEEL or equivalent.

CO2 GAS FOR WELDING TO IS 307/66 ( Reaffirmed in 1996) GRADE I, HAVING PURITY 99.7% MIN. Co2 BY VOLUME, IN FIRMS RETURNABEL CYLINDER.

MIG/MAG welding filler wire to IRS-M46-2020, Class-Vl, wire size -1.2 mm Grade ER308L as per spec -AWS A5.9/5.9M:2017

200 MM FABRICATED M.S FOOT VALVE MANUFAC [200 MM FABRICATED M.S FOOT VALVE MANUFACTURE BY HANDMADE M.S PLATE CUTTING WELDING, LEDER GASKIT PAINTING COMPLETE]

Upgradation modification of Tech Sec including welding of iron frame and fitting of plywood and wooden rack installation, Temporary Marker Pen, Wooden Cutting blade, 3 Inch Iron Keel Bolts, Wooden Glue Adhesive 200gm

Portable Welding Machine (V2) (Q3), Small Angle Grinders (Q3), Electric Drill (Q3), Electric Circular Saw for wood cutting (NDRF) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years Of Experience and Turnover Yes | ... Portable Welding Machine ...

Rate Contract for Fabrication and Maintenance of Structural Steel, Sign / Display Boards Including Stenciling, Normal and Pictorial Painting Etc. At Bongaigaon Refinery

Design, fabrication, supply, installation and commissioning of penstock and steel in liner of Khandong Power Station (2 x 23 MW), Umrongso, Assam

Repair of Boilers W-387 and W-388 (including supply, fabrication and replacement of furnace and smoke tubes) at CTF Geleki, Assam.

IOAOD ENG FABRICATION OF 150 NOS 20KL HORIZONTAL TANKS FROM IOCL SUPPLIED STEEL PLATES FOR VARIOUS DIVISIONAL OFFICES UNDER IOAOD STATE OFFICE.

SUPPLY, FABRICATION, SHOP PAINTING, FINAL PAINTING, TRANSPORTATION AND DELIVERY OF FABRICATED STRUCTURAL STEEL AT PFCC- NREP (GROUP B) SITE OF NRL ASSAM

As Per BOQ details

Custom Bid for Services - Fabrication supply and fitment of box clamp MS CC, Custom Bid for Services - Fabrication supply and fitment of Box clamp AS SS, Custom Bid for Services - Sealing charge utilizing box clamp MS CS, Custom Bid for Services - ... - Fabrication Supply ... - Fabrication and ... Exchanger fabrication supply ...

Hiring of manpower for outsourcing of welding works at Coaching Depot TSK and NTSK Yard along with helper for a period of 02 (two) years.