Fabrication Tenders in Assam

Air blower compressed petrol pre-heating system, the machine specifically designed for preheating the Rails before Welding, the machine compressor of prtrol start kerosene run engine, a petrol tank an

USFD testing of Flash Butt welding joint by Phased Array Ultrasonic Weld tester (PAUT) in the jurisdiction of Sr. DEN/I and Sr. DEN/II/Rangiya Division of N.F. Railway.

MISCELLANEOUS CIVIL STRUCTURAL AND UG AG PIPING FABRICATION AND ERECTION INSULATION WORKS FOR RTA TIE IN AND ALLIED WORKS OF MPMC EPCM UNITS FOR NREP PROJECT AT NUMALIGARH REFINERY ASSAM

Fabrication, Supply and Installation of Solar Powered Cart Mounted Multifunctional I_S, Mobile Lift I_S under SOPD_G (Innovation_Consultation_ Pilot Project) for the year 2024_25 under Boko_Chaygaon Div (I) Boko_Pkg_2

Supply and fitment, fabrication of SBC panel MS frame duly power coated with acrylic sheet ,Size: 21.8x8.2 inch, Supply materials As per Aneexure -A, Make:Arihant ,Dirak Or Similar

Design, Construction, Fabrication, Erection, Installation, Testing and Commissioning of Two Steel Gangway Structure with Yoke System at Pandu Terminal on EPC mode (one at upstream of Collapsible Jetty)

Design, Construction, Fabrication, Erection, Installation, Testing and Commissioning of Two Steel Gangway Structure with Yoke System at Pandu Terminal on EPC mode (one at downstream of Collapsible Jetty)

DESIGN, SUPPLY, FABRICATION, ERECTION, TESTING, PRECOMMISSIONING AND COMMISSIONING OF 7 NEW TANKS AT GOLAI TANK FARM FOR DR 1.0 EXPANSION PROJECTS OF INDIAN OIL CORPORATION LIMITED, DIGBOI REFINERY

Design, fabrication, supply and installation of working folding type platforms with two sides working ladder convenient for placement in Gas Turbines supplied by MHI at Gas Turbine Building

Fabrication and installation of Retro-Reflective sign boards, Direction boards and Salient feature boards for HO sites of MISD-II and III, CWC, Silchar under MID, CWC, Shillong

Fabrication and supply of Reflective high intensity prismatic type IV sheeting Bridge board of 3M/Avery Dennison or equivalent make with company Pre - qualification warranty certificate; Bridge Boards

Fabrication and supply of Refective high intensity 4Avery Dennison prismatic type IV sheeting Bridge board or equivalent make with company Pre gualification warranty certificate: Bridge Boards made up

Custom Bid for Services - Fabrication and supply of Operational spares of BPCL make Main Injection Pumps installed at ETP/WIP - LKW & LKM Similar Category Repair and Overhauling Service

Custom Bid for Services - 200145296 DEPLOYMENT OF EX- WRI WELDING EXPERT & EX-BHEL EXPERTS DURING 250 MW UNIT OH AT NTPC BONGAIGAON Similar Category Operation and Maintenance Power House/Power Plant

P-Way maintenance work including assistance of welding, end cropping, distressing rail painting, side drain cleaning and other ancillary works and hiring of MUV under jurisdiction of SSE/P-Way/BXP.

Custom Bid for Services - 200140918 Rate Contract for USFD tests for Rail and Welding Joints of BgTPS MGR Track for 2 Years Similar Category Operation and Maintenance Power House/Power Plant

P-Way maintenance work including assistance of welding, end cropping, distressing rail painting, side drain cleaning and other ancillary works and hiring of MUV under jurisdiction of SSE/P-Way/DPU.

Copper conductor welding cable (HOFR Covering) , Cable size 50 Sq.mm, Rated current in Amps at 60% duty cycle is 360A as per Drg.No. Conforiming to IS: 9857:1990 with latest amendment

Copper conductor welding cable (HOFR Covering) , Cable size 50 Sq.mm, Rated current in Amps at 60% duty cycle is 360A as per Drg.No. Conforiming to IS: 9857:1990 with latest amendment

Copper conductor welding cable (HOFR Covering) , Cable size 50 Sq.mm, Rated current in Amps at 60% duty cycle is 360A as per Drg.No. Conforiming to IS: 9857:1990 with latest amendment

Copper conductor welding cable (HOFR Covering) , Cable size 50 Sq.mm, Rated current in Amps at 60% duty cycle is 360A as per Drg.No. Conforiming to IS: 9857:1990 with latest amendment.

DRE022D214 - Roof Sheet replacement of North End Filling Station (NEFS) and Supply and Fixing of Turbo ventilators at WPU, NEFS and M/M Fabrication Shed at IOCL-Digboi Refinery

Fabrication, Supply and Installation of Solar Powered Cart Mounted Multifunctional I_S, Mobile Lift I_S under SOPD_G (Innovation_Consultation_ Pilot Project) for the year 2024_25 under under Tihu Div. (I), Tihu_Pkg_4

Fabrication, Supply and Installation of Solar Powered Cart Mounted Multifunctional I_S, Mobile Lift I_S under SOPD_G (Innovation_Consultation_ Pilot Project) for the year 2024_25 under Raha-Batadrava Div. (I), Batadrava_Pkg_6

Design, engineering, supply, fabrication, erection and construction of Pre engineered building shed along with associated Civil works, Area development jobs, smoke detection and Sprinkler system at Guwahati Refinery Complex

FABRICATION OF SHED FOR PLANT/ MACHINERY INSTALLED UNDER OPEN SHED IN WATER SUPPLY INSTALLATION FOR PUMP HOUSE NOS 7, 8, 9, 10 AT SOLMARA CANTT UNDER GE(N) TEZPUR

RATE CONTRACT FOR SUPPLY, FABRICATION AND ERECTION OF MILD STEEL CANOPY AND ALLIED WORKS AT RETAIL OUTLETS UNDER GUWAHATI, TINSUKIA, SILCHAR and IMPHAL DIVISIONAL OFFICES OF IOAOD STATE OFFICE

Supply and fitment, fabrication of SBC panel MS frame duly power coated with acrylic sheet ,Size: 18.4 x19.5 inch, Supply materials As per Aneexure -1, Make:Arihant ,Dirak Or Similar....

Fabrication and Supply of Solar Powered Cart Mounted Multifunctional Irrigation Scheme 2HP with two nos of manual boring in Sonai LAC under SOPD G for the year 2025-26

Fabrication, Supply and Installation of Solar Powered Cart Mounted Multifunctional I_S, Mobile Lift I_S under SOPD_G (Innovation_ Consultation_ Pilot Project) for the year 2024_25 under Dhekiajuli_Barchalla Div. (I), Dhekiajuli_Pkg_1

Custom Bid for Services - Contract For Drawing Development Fabrication And Supply of Gear Set for 2 Nos Flocculator Mixer In WWTP in IOCL Bongaigaon Refinery Similar Category Support Services

Custom Bid for Services - Hiring of manpower for outsourcing of welding works at Coaching Depot TSK and NTSK Yard along with helper and data entry operator for a period of one year

Web welded with Top plate as per Drawing no. LE11313 alt a & LE11318 alt a with welding as per RDSO guidelines for IRSM-41 and with RED OXIDE ZINC CHROMATE PRIMER COATING

Repair and Overhauling Service - Repairing of Three Seater Chair and Sofa cum bed with welding fixing nut and bolts including painting etc as per direction by the department; NA; Yes; Buyer Premises

Unbranded Electrodes for manual metal arc welding of Stainless steel and other similar high alloy steels 350 Brand: NA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-5

Unbranded Electrodes for manual metal arc welding of Stainless steel and other similar high alloy steels 450 Brand: NA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-5

Unbranded IS 814:2004 With Latest Amdmnt. Covered Electrodes for Manual Metal Arc Welding of Carbon and Carbon Manganese Steel 450 MM Brand: NA (Detailed Description/Specification as per Product # 1 o

Unbranded Electrodes for manual metal arc welding of Stainless steel and other similar high alloy steels 350 Brand: NA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-5

SUPPLY OF WELDING MACHINE OF PORTABLE INVERTER TYPE.( Preferably ADOR CHAMP 200 ). INPUT POWER CAPACITY IN 7 KVA , INPUT VOLTAGE FREQUENCY 50 Z. PROTECTION CLASS IP 23.MAKE :- ADOR , ESAB OR SIMILAR

Fabrication, Supply and Installation of wooden cabinets made up of specified teak wood sections with plywood, laminates and other hardware items for setting up Astronomy Gallery at Nalbari Planetarium and Science Centre, Nalbari, Assam

ESTABLISHMENT, CONSTRUCTION, SUPPLY and PROCUREMENT, FABRICATION, ERECTION OF MACHINERIES, TRIAL RUN and COMMISSIONING OF MATERIAL RECOVERY FACILITY (MRF) AND WASTE TO COMPOST (W2C) PLANT AS PER SWM RULES 2016 UNDER SBM (U) AND 15TH FC (TIED GRANT)

Establishment, Construction, Supply, Procurement, Fabrication, Installation of Machinery, Trial Run, and Commissioning of a 20 TPD Automatic Solid Waste Segregation Plant as per the Solid Waste Management (SWM) Rules, 2016

Supply, fabrication, erection, testing, and commissioning of Mechanical Piping system for hookup with header line and related civil works at LPG Bottling Plant, North Guwahati for LPG compressors and pumps

Fabrication, Supply and Installation of Solar Powered Cart Mounted Multifunctional I_S, Mobile Lift I_S under SOPD_G (Innovation_Consultation_ Pilot Project) for the year 2024_25 under Morigaon-Laharighat-Jagiroad Div. (I), Jagiroad_Pkg_3

Fabrication, Supply and Installation of Solar Powered cart Mounted Multifunctional I/S, Mobile LIS under SOPD-G (Innovative Schemes) for the year 2025-26 under Biswanath-Behali Div(I). Package_1

e-Tender for fabrication and installation of Target Poles and Sal Wooden Gauge Posts for Hydrological Observation sites of Meghna Sub-Division-III, CWC, Silchar under Meghna Division, CWC, Silchar.

Re-fabrication of in situ Glued insulated rail joints/cast-in-situ Glued insulated rail joints in 90R/52 KG/60 KG rail under the jurisdiction of Sr.DEN/II/RNY.

COPPER COATED WIRE FOR SUBMERGED ARC WELDING size: 4.00mm dia class W-1, conforming to IRSM 39-2001 with latest amendment, Make & Brand : GEE or similar RDSO's approved brand only. HSN code: 7229.

Supply and Installation valley gutter having 1.00 meter width, made out of 0.91 mm thick aluminium sheets , the joints shall be made by aluminium welding to make water tight including supplying of 75

MIG WELDINGWIRE, DIA- 1.2 mm solid MIG welding filler wire Class-1 conforming IRSM46/2020 as IS:6419-2004 as per RDSO's approved brand only. Make & Brand: GM70 or similar, HSN Code:7229.