Fabrication Tenders in Assam

Alumimium conductor welding cable (HOFR covering) cable in size 70 Sq.MM, rated current in Amps at 60 % duty Cycle is 361A. Conforming to BIS Specn. No. IS 9857, 1990 ( Reaffirmed: 1995) with Amendmen

Supply, fitting, fixing and laying valley gutter having 1.00 meter width, made out of 0.91 mm thick aluminium sheets , the joints shall be made by aluminium welding to make water tight including supp

Alumimium conductor welding cable (HOFR covering) cable in size 70 Sq.MM, rated current in Amps at 60 % duty Cycle is 361A. Conforming to BIS Specn. No. IS 9857, 1990 ( Reaffirmed: 1995) with Amendmen

Supply, installation and commissioing of welding machine, MIG 502i (PS + 20M WF) PSF 515,3 M ICO 32B (2 Gauge) Carbon dioxide Regulator CO2 Heater + Core 110V (ALD), Technical spec. As per annexure attached

Supply of AT welding set complete (Compressor blower, weld trimmer power pack, abrasive cutting machine, rail profile weld grinder with frame, Honda generator 1.2 kVA, etc.) as per schedule of requirements (Specification enclosed)

SITE SURVEY ENGINEERING SUPPLY OF PIPE SUPPORT AND HARDWARES FABRICATION INSTALLATION OF WATER DISCHARGE PIPE LINES AT 4X50 MW KOPILI POWER STATION OF KOPILI HYDRO POWER STATION, NEEPCO LTD UMRANGSO ASSAM

AT welding set complete as per item 1 of attached specification document, Industrial hand gloves leather white lined as per item 2 of attached specificaitn document, Hydraulic Rail bender as per item 3 of attached specification document, Manufacture and supply of complete set of Inspection gauges as per item 4 of attached specificaiton document, Sodium hypochlorite solution or similar as per item 5 of attached specification document, RO water purifier as per item 6 of attached specificaiton document, Retro reflective orange color safety jacket for NHGJ as per item 7 of attached specification document, Retro reflective orange color safety jacket for NHLG as per item 8 of attached specification document, Supply and installation of diesel storage tank as per item 9 of attached specification document

Fabrication, Supply, Installation of exhibit wooden cabinets made up of specified teak wood sections with plywood, laminates and other hardware items for setting up of Astronomy Gallery at North Lakhimpur Planetarium and Science Centre, Assam

SITE SURVEY, ENGINEERING, SUPPLY OF PIPE SUPPORT AND HARDWARES, FABRICATION, INSTALLATION OF AIR DISCHARGE PIPE LINES AT 4X50 MW KOPILI POWER STATION OF KOPILI HYDRO POWER STATION, NEEPCO LTD, UMRANGSO. ASSAM

DESIGN, SUBMISSION OF DRAWING, APPROVAL, FABRICATION, SUPPLY, SUPERVISION OF INSTALLATION, PRE-COMMISSIONING CHECKS, TESTING, PROVIDING RELAY SETTINGS, TRAINING, COMMISSIONING OF 6.3KV VCB PANELS AS PER ATTECHED SPECS AT IOCL,GUWAHATI REFINERY.

Facility Management Services - LumpSum Based - ROW-OIL INDIA LIMITED; FABRICATION AND SUPPLY OF WARNING SIGN BOARDS AND BOUNDARY MARKER POSTS; Consumables to be provided by service provider (inclusive in contract cost)

Fabrication, Supply and Installation of Solar Powered cart Mounted Multifunctional I_S, (2HP) Mobile LIS (5HP) for Jorhat and Teok LAC under SOPD-G (Innovative Schemes) for the year 2025-26 . Package_2

Custom Bid for Services - OT Bongaigaon BIANNUAL SERVICE CONTRACT FOR FABRICATION AND ERECTION OF MISCELLANEOUS PLATFORMS AND SAFETY RELATED STRUCTURES IN BOILER Similar Category Operation and Maintenance Power House/Power Plant

Supply, Fabrication and Installations of Retro Reflective Sign Boards and Direction Boards (complete in all aspects) at Various Sites and Sub-Division Offices under UBD Dibrugarh,CWC during the FY2022-23

GMM ARC IS 814:2004 With Latest Amdmnt. Covered Electrodes for, GMM ARC IS 814:2004 With Latest Amdmnt. Covered Electrodes for Manual Metal Arc Welding of Carbon and Carbon Manganese Steel 450 MM

COPPER COATED WIRE FOR SUBMERGED ARC WELDING size: 4.00mm dia class W-1, conforming to IRSM 39-2001 with latest amendment, Make: GEE or any other latest RDSOs approved brand only. HSN code: 7217.

Web welded with Top Plate as per RCF Drawing No. LE11317 Alt ?a? & LE11319 Alt ? a? with welding as per RDSO guidelines for IRSM-41 material and with Red Oxide Zinc Chromate Primer Coating.

Copper coated wire for submerged Arc welding size: 4.00 mm dia class W-1 conforming IRSM 39 with latest amendment. Make: RAAJSAW-1 or any other latest RDSO's approved brand only. (Details special term

Copper coated wire for submerged Arc welding size 4.00 mm dia class W-2 conforming IRSM 39-2001 with latest amendment . Make: DWEKAM or any other latest RDSO's approved brand only. (Details special te

COPPER COATED WIRE FOR SUBMERGED ARC WELDING size: 4.00mm dia class W-1, conforming to IRSM 39-2001 with latest amendment, Make: GEE or any other latest RDSOs approved brand only. HSN code: 7217.

MDF LAMINATE 8 FEET X 4 FEET 3 QUARTER INCH WIDTH, MDF LAMINATE 8 FEET X 4 FEET QUARTER INCH WIDTH, SCREWS JIGSAW 1 INCH, SCREWS JIGSAW 1and half INCH, EDGE BEADING SAME COLOUR OF MDF, WUDFILL, HANDLE 3 INCH, WOODEN REABER 1 AND HALF INCH WIDTH AND 20 FEET, SWIVEL WHEEL OD 4 INCH AND WIDTH 2INCH WITH BREAK SYSTEM, FEVICOL SR 500 gm, DRAWER CHANNEL 15 INCH, SWIVEL WHEEL OD 4 INCH AND WIDTH 2 INCH WITH FIXED WHEEL, 6A 3 PIN SOCKET ANCHOR, 6A 1 WAY SWITCH ANCHOR, 1 AND HALF INCH 3 CORE FLEXIBLE CABLE, 1 AND HALF INCH WIRE FINOLEX OR V GUARD, 6 A 3PIN TOP ANCHOR

Supply and fabrication of barge, Installation of pump sets,fabrication of surge tank, illumination etc.

Supply and fabrication of barge, Installation of pump sets,fabrication of surge tank, illumination etc.

Supply and fabrication of barge, Installation of pump sets,fabrication of surge tank, illumination etc.

Establishment, construction, supply and procurement, fabrication, erection of machineries, trial run, commissioning of Material Recovery Facility and Waste to Compost plant at Tinsukia Municipal Board, Tinsukia, Assam as per SWM Rules 2016.

LIMITED TENDER FOR REPAIR AND OR REBUILD AND OR REPLACEMENT, INCLUDING DESIGN SUPPLY FABRICATION ERECTION TESTING AND COMMISSIONING OF HYDRO MECHANICAL COMPONENTS OF UMRONG WATER CONDUCTOR SYSTEM UNDER RECONSTRUCTION RENOVATION and MODERNIZATION

Fabrication erection and commissioning of IFR or CR vertical AG tanks including construction of RCC ring wall foundation associated pipeline electrical and allied work at existing Dimapur Depot Signal Basti Dimapur Nagaland

Custom Bid for Services - 200130904 Service contract for erection and fabrication of working platforms under ESP passes in all units and any other miscellaneous structures in ash handling area of NTPC Bongaigaon

Manufacture and supply of extra rail shearing blades 60 kg for removing the mould and the excess metal immediately after welding a joint. The shear blades shall be capable of trimming at least 200 at

Manufacture and supply of extra rail shearing blades 52 kg for removing the mould and the excess metal immediately after welding a joint. The shear blades shall be capable of trimming at least 200 at

HR SHEET, STEEL ANGLE, WELDING ROD

Supply, installation and commissioning of welding machine, MIG 402i (PS+15M enclosed WF) with accessories, 1) MIG Torch, PSF 405 Plus 5M - 01 No., 2) CO2 Regulator, ICO 32B (2 gauge) - 01 No., 3) Heater with core 110V- 01 No., 4) MIG basic trolley - ... Copper welding cable ...

M2415990073, M2415990075, M2415990082, M2410990047, M2410990043, M2415990056, M2420882024, M2420882529, M2415990066, M2415022057, M2415032056, M2415032552, M2405990022, M2415990072, M2415990050

Fabrication & Supply of 11200 mm O/R (Curved) Fan shaped Switches for 1 in 16, T/Out for BG 60 kg (UIC) on PSC Sleepers to RDSO Drg. No. T-5692 Alt.04

Agglomerated FLUX for submerged Arc Welding confirming to Class F-1 of IRSM 39 - 2001 with latest amendment , weight of each packet 25 kgs. HSN Code: 3810. Make - GEE or any other RDSOs approved Brands only.

Manufacture and supply of tools for at welding of rail joints for 52 kg rail as per list of 48 items enclosed in annexure-1. Note: -material should strictly comply to the given specifications. In cas

GAS CUTTING EQUIPMENT as per IS: 7563. make ESAB or ITS equivalent. set consists of 05 items set details as foiiows. 1.cutting/welding torch:-02 nos.(2) flash back arrester suitable for lifting to the

Denting work of TATRA as per Reqmt incl labor charge, Welding work of TATRA as per Reqmt incl labor charge, Painting work of TATRA as per Reqmt incl labor charge, Marking Work of TATRA as per Reqmt incl labor charge, Upholster work and other Misc work of TATRA as per Reqmt incl labor charge

Fabrication, supply & Replacement of open web steel bridge girder of span of Br No 116 DN (9x45.7m) at km 109/2-7, on the section NJP-NOQ by 25T Loading under SSE/BR/SGUJ.

Fabrication Supply and Installation of Solar Powered Cart Mounted Multifunctional I S 2 HP with two Nos of Manual Boring under 121 Hailakandi LAC under Innovative schemes 5 points for the year 2025 26

ESTABLISHMENT CONSTRUCTION SUPPLY PROCUREMENT FABRICATION ERECTION OF MACHINERIES TRIAL RUN AND COMMISSIONING OF MRF AND WASTE TO COMPOST PLANT AT DOOMDOOMA AS PER SWM RULES 2016 UNDER SBM U ON ENGINEERING ON EPC MODE

Establishment, construction, supply procurement, fabrication, erection of machineries, trial run and commissioning of Material Recovery Facility and Waste to Compost plant at North Lakhimpur as per SWM Rules 2016. Under SBM on Engineering, Procurem

Ground sheet canvas khaki, make -XII (spec.-1.ISS-7210 dec-82 for fabrication, II.IS: 6110-1983(4th revision ) amdt. 2(reaffirmed-1994) Quality-1, grade-A for double Texture rubberized water proof fab

MANUAL METAL ARC WELDING ELECTRODE, CLASS-M5, TYPE OF COATING : HEAVY, (SPECN. NO. IRS:M-28/12 AMENDMENT-1& 2), SIZE 4.00 X 350 MM. CODE E 18.8 MnR 26. as per Drg.No. (SPECN. NO. IRS:M-28/12 AMENDMEN

COPPER COATED WIRE FOR SUBMERGED ARC WELDING size: 4.00mm dia class W-1, conforming to IRSM 39-2001 with latest amendment, Brand: RAAJ SAW-1, Make: GE or similar other latest RDSOs approved brand only. HSN code: 7229.

MANUAL METAL ARC WELDING ELECTRODE, CLASS-M5, TYPE OF COATING : HEAVY, (SPECN. NO. IRS:M-28/12 AMENDMENT-1& 2), SIZE 4.00 X 350 MM. CODE E 18.8 MnR 26. as per Drg.No. (SPECN. NO. IRS:M-28/12 AMENDMENT

Establishment, construction, supply and procurement, fabrication, erection of machineries, trial run and commissioning of Material Recovery Facility (MRF) and Waste to Compost (W2C) plant at Dhakuakhana dumping ground as per SWM Rules 2016 Under S

ESTABLISHMENT CONSTRUCTION SUPPLY AND PROCUREMENT FABRICATION ERECTION OF MACHINERIES TRIAL RUN AND COMMISSIONING OF MATERIAL RECOVERY FACILITY MRF AND WASTE TO COMPOST W2C PLANT AT SIVASAGAR UNDER SBM U ON EPC MODE UNDER 15TH FC

Fabrication, Erection, Testing And Commissioning Assistance Of Mild Steel Vertical Storage Tanks And Under Ground Tanks, Supply and Installation Of Fixed Foam System With Foam Tanks, Medium Velocity Water Spray system And Allied Works, includingCivil

SHEET CELLULAR, WELDING ROD, OG PAINT, RAXIN GREEN