Fabrication Tenders in Chhattisgarh

Custom Bid for Services - 200150986 FABRICATION OF BOILER TUBE BENDS FOR BOILER PRESSURE PARTS FOR NTPC KUDGI STPP 800MW BOILER Similar Category Operation and Maintenance Power House/Power Plant

Facility Management Services - LumpSum Based - Dumanhill CHP Siding; Assistance in welding and gas related work at Dumanhill CHP Siding of Kurasia Sub Area for 365 days; Consumables to be provided by buyer

Water tight welding of joints of pontoon with wings (1 X 6) for installation of Pump Motor Set at Lower Kusmunda Sumps for dewatering during up-coming monsoon at Dipka Expansion Project.

Laying, jointing, transportation, flange welding, dismantling/rearrangement of 6 inch dia Pipes for dewatering purpose with dismantling, shifting and installation of Pump set for 02 years at Baroud OCM, SECL, Raigarh Area

Making of poles of 9 mtr size 100 no. for overhead line work by cutting, jointing and welding of old damaged MS poles of Quarry power supply section of Dipka Expansion Project.

Fixing of Pick holders by welding after gouging and removing of old damaged/worn out pick/pick holders in crusher rolls of various Feeder Breakers at Mini CHP of Dipka Expansion Project.

Welding Cable single core Rubber insulated 95 sq.mm. stranded Aluminium Conductor 435 Amperes 40 Degree Celcius Ambient G.P. type as per IS:9857/1990 (with amendment -1) with ISI Mark. Make: Prima.

Welding Cable single core Rubber insulated 95 sq.mm. stranded Aluminium Conductor 435 Amperes 40 Degree Celcius Ambient G.P. type as per IS:9857/1990 (with amendment -1) with ISI Mark. Accepted Make:X

Welding Cable single core Rubber insulated 95 sq.mm. stranded Aluminium Conductor 435 Amperes 40 Degree Celcius Ambient G.P. type as per IS:9857/1990 (with amendment -1) with ISI Mark. ACCEPTED MAKE:

ADOR DRY Welding Machine >=5<=10 kVA Rated Input Power Brand: ADOR DRY (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687710263669 dt.16/01/2026)

Site Fabrication (including final painting) of structural members with raw materials and Fixing/installation/erection of GI Pipe /MS Galvanised hand railing of any dia. Works at NTPC Sipat FGD Stage-II Project Site.

Strengthening of structure (Discharge head) alongwith complete replacement of discharge chute assembly i.e. supply, fabrication, erection, installation, commissioning etc at Q1 and R1 Conveyors of New CHP, Dipka Expansion Project.

Fabrication and Fixing of 24 Nos of Structural extensions alongwith shifting and re-location of top-view CCTV camera installed at various Boom Barriers and Road Weighbridges of Kusmunda Project

Fabrication and Erection of enclosure over receiving hopper for arresting spread of dust during unloading of trucks in B-11 and B-12 Feeder Breakers, Mini CHP Dipka Expansion Project.

Assistance required for Dismantling of old Drive Heads of Belt Conveyor and fabrication, transportation and installation of new Drive Heads for Five (05) nos. belt conveyor of Kurja UG Mine.

TURNKEY CONTRACT FOR THE WORK PLANNING, DESIGN, ENGINEERING, CONSTRUCTION, FABRICATION, ERECTION, SUPPLY, INSTALLATION, TESTING, TRIAL RUN AND COMMISSIONING OF 1 KLD EFFLUENT TREATMENT PLANT CONSISTING OF ALL CIVIL, STRUCTURAL, ELECTRICAL....

Complete repairing of 02 nos. foldable ladder assembly and fabrication of 02 nos. field switch base of both BE1800E Shovels sl. No B10002 AND B10003 deployed in Dipka Expn. Project

FABRICATION, SAND BLASTING, METALIZING, PAINTING, TRIAL ASSEMBLING, DISMANTLING, STACKING, TRANSPORTATION TO SITE NEAR KORBA OF STEEL TRUSS GIRDERS FOR BRIDGE NO.3 (SPAN 30X30.5M OWG) AS PER RDSO/ APPROVED DRAWINGS

Welding , laying and fitting of 8 inch x 6 mtr M.S. Pipe from NCC/4 Nos. Sump to discharge upto surface through proposed changed location and also within the mine ( as per requirement ).

Refabrication/ denting/ straightening/ welding/ painting and fitment of damaged/deformed fender, ladder, railing, catwalk etc. of 05 Nos. CAT773E 60T Dumper Sl. No. PRB00581, PRB00816, PRB00841, PRB00572 and PRB00749 working at Kusmunda OCP.

Manual Metal Arc Welding Electrode Class M1, Size: 3.15 mm, type of coating: Heavy . (Spec No. IRS M-28/20) . Note: Manufacturer's Test Certificate should be submitted along with the supply. Firm offe

Box type Welding Goggles confirming to IS :1179 -1967, Amendment 2, 06/2008 with opaque frame, dull interior, low reflecting finish, flared edges which are in contact with face and no irregularities a

AT Welding equipment (Cap pre heating system) Compressed Air Blower Machine fitted with data transmitter technology as per clause 10.1.(iv) of IRS T 19-2021 the Compressed Air Blower shall have facili

Custom Bid for Services - 200122876 CONTRACT FOR USFD ULTRA SONIC FLAW DETECTION TEST FOR RAIL AND WELDING JOINTS FOR PHASE I PRIORITY SINGLE LINE CONNECTING NTPC LARA TO INDIAN RAILWAY NETWORK AT KOTARLIA

Custom Bid for Services - Fabrication of bends of different sizes 4 inch 6 inch 8 inch and 10 inch for pumping and pipeline related work, E&M, KOCP Similar Category Operation And Maintenance Of Water Supply Systems

Custom Bid for Services - Welding and Painting work of main pantoon 12 nos and support pantoon 72 nos for pumping operation during Monsoon 2025 for Manikpur OCP. Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Custom Bid for Services - Providing Services for Roll building Shop Old guide Shop Welding Gas Cutting activities in WRM and defective coil cutting job in Shipping area Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

AS PER NIT

Planning, Design, Engineering, Construction, Fabrication, Supply, Erection, Trial Run and Commissioning of 2X3.15 MVA, 33kV/0.433kV Substation including O and M on Turnkey Basis at Nehru Shatabdi Nagar Colony, SECL(HQ)

Fabrication and replacement of Catwalk Platform, Grease Platform, Radiator and Oil Cooler Platform and their respective railing in 03 Nos. BE1000 Hydraulic backhoe and 02 Nos. BE1800E Electric shovel at DEP.

Work of Fabrication and erection of foot over bridge over different conveyor P-Q/ J-K series for easy and safe movement of manpower and material at Back up, Gevra Project.

Work of Dimantling, fabrication and erection of different chutes, transfer points etc. in different conveyors and feeder breakers at Back up CHP at Gevra Project on as and when required basis.

Fabrication of Steel Load Body (Dala) on new TATA Truck model SA 1218.T 4x4 BSVI chassis as per scope of work and technical specifications at CMPDI, RI-V, Bilaspur (CG).

1700208043 Heating Torch with 4 Nozzles, 1700010782 Chipping Hammer, 1700008229 Welding Glass Black, 1700010238 Welding Wire Brush

Water tight welding of joints and strengthening of pontoon with wings (1 X 6) for installation of Pump Motor Set at Lower Kusmunda Sumps for dewatering during up-coming monsoon at Dipka Expansion Project.

Transporting, Welding, Shifting, laying and fitting of 10/12 inch dia MS Pipe line in mines for discharging the mines water from new proposed sump to discharge point on surface during monsoon 2020-21.

Flange welding in 4 inch and 6 inch MS Pipe and Transportation and laying of 6 inch and 4 inch M.S. Pipe from Surface to LHCM panel of Pandavpara Mine of Jhilimili sub Area.

Custom Bid for Services - 200151259 Deployment of EX-WRI Welding expert & Ex-BHEL expert for supervision of Boiler pressure parts overhauling works at NTPC Korba Similar Category Operation and Maintenance Power House/Power Plant

HR MS sheet 20 feet x4 feet x3point15mm, HR MS sheet 20 feet x4 feet x2point2mm, MS Plate 20 feet x4 feet x 10 mm, MS Plain bar rod 20 feet x Dia 16 mm, MS Chequer plate 16 feet x 4 feet 8 mm, MS Angle 65 mm 65 mm 5mm length 20 feet, MS Pipe OD 33point5 mm Thickness 3point4 mm Length 20 feet, MS Strip 5 x40 mm length 20 feet, MS Pipe OD 90mm Thickness 0ponit5 m Length 20 feet, MS Round Solid 25 mm Length 20 feet, MS Pipe OD 25mm Thickness 2point9 mm Length 10 feet, MS Pipe OD 75mm Thickness 5 mm Length 20 feet, MS Angle 35 mm x 35 mm x 5 mm Length 20 Feet, MS Angle 25 mm x 25 mm x 5 mm Length 20 Feet, MS Sheet Gauge 18 Thickness 1point214mm Size 20 feet x 4 feet

Facility Management Services - LumpSum Based - Industrial; Contractual assistance for day to day work of material handling as well as for carrying out works related to welding and machining/drilling at RWS Korea, SECL Chirimiri Area; Consumables to b..

Fabrication and strengthening of (08 Nos.) RC Feeders and 05 Nos. Discharge Chutes (Including Loading point Motorized Chute) for 365 days at Rajnagar RO CHP of Rajnagar RO Sub Area, Hasdeo Area.

Fabrication of underground Bunker between 45 D and 46 D of 51 LE from Seam No. III to Seam No. II of Capacity 150 Te. For Pandavpara Mine of Jhilimili Sub Area

Design, Engineering, Construction, Fabrication, Supply, Trial Run, commissioning of 2x1 MVA, 33/3.3KV Substation on Turnkey basis including maintenance for 04 years during defect liability period at Saraipali OCP, Korba Area, SECL

Planning, Design, Engineering, Construction, Fabrication, Supply, Erection, Trial Run and Commissioning of 2X4 MVA, 33KV/3.3KV Substation including Operation and Maintenance during Defect Liability Period on Turnkey Basis at SHIWANI UG Mine

Fabrication of front and rear Jack up stands for fitment/removal and other related jobs of OTR tyres in 100 Te Dumpers and 70 KL Water Sprinklers deployed in Dipka Expansion Project.

Assistance in welding and repairing work of HEMM with in addition of miscellaneous works i.e., cleaning, washing, greasing and material handling etc. at Manikpur Excavation Workshop of Korba Area for 305 days within 365 days.

Manufacture and Supply of Portions for fusion welding of 60 Kg/90 UTS rail with 25mm gap (IREPS Sub Item ID : 3100494015) by Alumino Thermit Process using compressed Air Petrol Pre-heating System, 3 P

Manufacture & supply of portions for fusion welding of rails by alumino thermic process for combination between 60 Kg/60E1 R260 grade rails and 60 Kg 90 UTS rail section with 25mm using Air Petrol Pre

Manual Metal Arc Welding Electrode, Class-M5, Type of Coating: Heavy, Size: 4.00 x 350 mm (Spec. No. IRS:M-28/17 Code E 18.8 MnR 26 as per IS:5206-2003) ,Make :- Accurate Arc 18.8.5

Manual metal arc welding electrode size 3.15x 350 mm Class-D. Heavy coating to IRS spen. No. IRS. M:28/2020, IS/AWS code E8018W2, Packing as per clause 5.1.1 of IRS M/ 28/2020.