Fabrication Tenders in Gujarat

Custom Bid for Services - Fabrication of Spares (As Per Sample) for BPCL 33-5 and BPCL 43-7 Pumps Installed in Ahmedabad Surface Installations Similar Category Repair and Overhauling Service Repair, Maintenance and Installation of Plant Systems/Equipments

Custom Bid for Services - Fabrication of Spares (As Per Sample) for BPCL 63-10 and BPCL 65-10 Pumps Installed in Ahmedabad Surface Installations Similar Category Repair and Overhauling Service Repair, Maintenance and Installation of Plant Systems/Equipments

Design, Fabrication of Horse Transport Vehicle

Unbranded Blacksmith Tool Kit (YSSY UP GOVT) Blacksmith forge, Unbranded Blacksmith Tool Kit (YSSY UP GOVT) Blacksmith forge blower, Aari (cutting saw), Basula (Adze),Nihahi (Anvil), Hammer,Chisel,Hand Drill machine,Hexa frame,hexa blade, portable ... portable welding machine

MANUAL METAL ARC WELDING (MMAW) ELECTRODE CLASS M1 SIZE DIA 4 X 350MM LONG HEAVY COATED TO RDSO SPECN. IRS.M28-2017 REV.O, TABLE.1 Firms offer : Same as above , Brand as ? RATNA 308 as per IRS: M-28/

Flux cored MIG / MAG welding filler wire with shielded gas, Class - IV, Spec No. IRSM-46-13, with amendment-1 grade as per AWS, A 5.29 - 10, Grade- E81T1 - W2C, Size - 1.2mm in spool of 12.5kg each, M

SHORT LINKED CHAIN SAFETY MANUFACTURED FROM 12 MM ROAD OF ALLOY STEEL GRADE 80 BY ELECTRIC REGISTANCE OR FLASH BUILT WELDING PROCESS WITH ROUND RING AT BOTH END OF SIZE 12 MM THICK X25 MM ID ,LOAD BEA

FLUX CORED MIG/MAG WELDING FILLER WIRE WITH SHIELDED GAS. CLASS IV SPECN. IRS M-46/2020 WITH AMENDMENT -1 GRADE AS PER AWS A5. 29-10 GRADE E8ITI-W2C SIZE1.2 MM IN SPOOL OF 12.5 KGS EACH

Design, Supply, Fabrication, Transportation, Complete Installation, Erection, Testing, Commissioning and Handing Over entire GEODESIC Aluminum Dome System for Tank number 16 (Dia 14 m and Height 12 m) at Hazira Terminal, Surat under Gujarat SO

JC21MLT042 Engineering, procurement, fabrication, testing, supply and installation of complete convection module, dismantling of existing convection module and M and I of the furnace 03-FF-01 of FPU-II unit at IOCL Gujarat Refinery.

Fabrication And Erection of Structural Steel Works etc.in connection with Misc.Civil Works for EPCM Units (GDS, HCU, Interconnecting Pipe Rack and Allied Areas) and Design, Supply and Construction Work at IOCL, Gujarat Refinery, Vadodara, Gujarat

Tender for Design, Engineering, Supply, Fabrication, Installation, Testing and Commissioning of Overall Mechanical Package in all respects (on EPC Mode) for the project of FGD system of Ukai TPS with 03 years comprehensive OandM contract

Epoxy Resin XY-27/ A-83 ( Adhesives for fabrication of Glued joints confirming to specification IS 12994 1990 | As per RDSO approved QAP of Rev. 05 Dated:18/08/2019, epoxy adhesive, room temperature c

Custom Bid for Services - Rate Contract for Blast Cleaning Magnetic Particle Inspection MPI thickness measurement of Mast Monkey board Under Structure Substructure of Drilling Work over rigs for three years for Fabrication Shop CWS Vadodara

Facility Management Services - LumpSum Based - Multi Purpose Fire Tender as Fire fighter including Design Fabrication Providing Chassis BS VI Engine And Necessary Accessories at Notified Area GIDC Waghodia; Multi Purpose Fire Tender as Fire fighte..

Custom Bid for Services - Fabrication of monkey ladder and Removal providing and fixing of asbestos cement roof sheet at approximate height of upto 40meters approx at Gujarat Copper Project Similar Category Repair and Overhauling Service

Custom Bid for Services - Fabrication of brake liners shoes as per sample of Draw works of RG150 I work over rig Similar Category Repair and Overhauling Service Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) Repair, Maintenance and Installation of Plant Systems/Equipments

BONNET REPAIR, RADIATOR LEAKAGE AND WELDING, SILENCER GAS WELDING, AC GAS PIPE LINE REPAIR, LABOR CHARGE OF GEAR BOX REMOVE AND REFITTING

Custom Bid for Services - Total charges for Measurement and fabrication of 600 sq meter of Thermal Insulation Jacket including removal of existing old insulation, Panting and Installation of Thermal Insulation Jacket as per SOW Similar Category Oil and Gas Drilling Service Repair and Overhauling Service Maintenance and Pigging Service for Oil and Gas Pipelines

SOLID CO2 WELDING FILLER WIRE OF DIA 1.2 MM CLASS I AS PER RDSO Spec. No. IRS: M-46/13 with Amendment No. 1, Grade S3C503 as per IS:6419-2004. Firm offered: BRAND NAME : RAAJMIG-I, MAKE : REPL

Flux cored MIG/MAG Welding Filler Wire size 1.2mm dia. with shielded gas, Class VII Conforming to Spec. No. IRS: M-46/13 with Amendment no.1 (Grade E309T1-1 as per AWS: A 5.22-10). Shelf life: 9months

ONE COACH SET OF WELDING PARTS ON LWACCW SIDEWALL RH AND LH TO ICF DRG.NOS. 1)59314022 COL-I ALT " e " - 1 NO AND 2)59314023 COL-I ALT " f " - 1 NO Special Condition : To prevent damage during trans

SOLID CO2 WELDING FILLER WIRE OF DIA 1.2 MM CLASS I AS PER RDSO Spec. No. IRS: M-46/13 with Amendment No. 1, Grade S3C503 as per IS:6419-2004. BRAND NAME : RAAJMIG-1, MAKE : RAAJRATNA ELECTRODES PVT

Flux cored Mig-Mag welding filler wire with shielded gas, Class-IV, (Spec. No. IRS: M-46/13 with Amendment No. 1, Grade-E81T1-W2C. as per AWS A 5.29-10) Size-1.2 mm. Our Brand Name : RAAJCORED 81W,

SOLID MIG/MAG WELDING FILLER WIRE, CLASS VI SIZE 1.2 MM (SPEC.NO.IRS M-46/13 WITH AMENDMENT NO.1 GRADE ER 308 L AS PER AWS:A5.9-10)IN SPOOL OF 12.5 KGS/ROLL ACCEPTED BRAND: RAAJMIG ER 308L,MAKE:REPL.

Manual Metal Arc Welding Electrode Class-M1 Size 3.15 x350 mm long to IS-5206/2003 and IRS-M-28/2012 OR Latest. E 19-9 Rz6 (Heavy coated) -Accepted firm offer Make/Brand: MAKE- REPL, Brand- RATNA 308

Flux cored MIG/MAG welding filler wire with shielded gas, class IV (Spec. no. IRS: M-46/2020, grade E81T1-W2C as per AWS: A 5.29-10) Size 1.2 mm. make/ brand- ROYAL FIL GS 18 R ( E81T1-W2C)

4 Seater Stainless steel Bench as per RDSO Drg. No. RDSO/WKS/2014/4 . 4 seater stainless steel bench as per RDSO drawing No. RDSO/WKS/2014/4 fabrication, supply and installation of 4 seater stainless

CRANK SHAFT LATH WORK DONE, TRANSFER CASE CROSS MEMBER WELDING, FYL WHEEL LATH WORK DONE, DIESEL TANK GAS WELDING, COOLANT HOSE PIPE JOINTING

Iron Picket - 40 mm x 40 mm x 6 mm, Pre-Painted Galvanized Iron Sheet - 3.5 fix 10ft, Iron Pole - 1.25 inch x 1.25 inch, Tapping Screw, Fastner 100mm, PCC Platform

Custom Bid for Services - FABRICATION OF PLYWOOD CABINET STRUCTURE LOUVER PANELLING FITTING INCLUDING LASER CUTTING OF CG EMBLEM VADINAR AREA OF OPERATION MAP WITH ACRYLIC GOLDEN SHEET INCLUDING SPOT LIGHT Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

FOAM NURSER TENDER CHASSIS, FOAM NURSER FABRICATION

Design, fabrication and testing of HV Assembly

Design, Fabrication of K9 Dog Transport Vehicle

MS-FUT-LW-CYD-P5 Fabrication and testing of 20KL Fuel storage Tank(Batch 1) as per dwg no. 61-03-053 (Q3), MS- INS-LW-052-61 Supply and Installation of Batch 1 tank assembly at AFS Naliya Gujrat as per table (Q3), MS-FUT- AR-SPR-2791 Supply of spares ... MS-FUT-LW-CYD-P5 Fabrication and ...

Destressing of track and flash butt welding by super puller arrangement and FBW Plant for track works (Provision of Super puller and FBW Plant by IRCON) between Sachin to Vaitarana in connection with construction of Western DFCC phaseII,CTP12 Project

Ballastless Track Linking over Viaduct Sections on Main Line and Loop Lines including Setting up of Track Construction Base on Viaduct at various locations, TCB I to IV, along the alignment including Flash Butt Welding of rails for MAHSR T2 Project

FLUX CORED MIG/MAG WELDING FILLER WIRE FOR USE WITH SHIELDED GAS, CLASS IV AS PER SPECN. IRS: M-46/2020 WITH AMENDMENT -1 GRADE AS PER AWS A5.29-2010, GRADE E8ITI-W2C, SIZE 1.2 MM IN SPOOL OF 12.5 KG

Sub Item ID: 2300251001, Flux cored MIG/MAG Welding Filler Wire with shielded gas, Class I (Spec. No. IRS: M-46/20, Grade E71T-12 as per AWS: A5.20/ A5.20M:2005 (R2015) SIZE-1.2 MM DIA. IT IS ICF APPR

SOLID MIG-MAG WELDING FILLER WIRE OF DIA 1.2 MM CLASS I AS PER Spec. No. IRS: M46/2020 , Grade S3C503 as per IS:6419-2004 of approx 12.5 kgs each spool. Item to be procured from approved sources only

Flux cored Mig-Mag welding filler wire with shielded gas, Class-IV, (Spec. No. IRS: M-46/13 with Amendment No. 1, Grade-E81T1-W2C. as per AWS A 5.29-10) Size-1.2 mm Firm Offer Brand-RAAJCORED 81 W( G

FLUX CORED MIG/MAG WELDING FILLER WIRE WITH SHIELDED GAS. CLASS IV SPECN IRS: M-46/2020, GRADE AS PER AWS A5. 29/2010 GRADE E81T1-W2C SIZE 1.2MM IN SPOOL OF 12.5 KGS EACH. FIRM'S OFFER: MAKE BRAND-ROY

FLUX CORED MIG/MAG WELDING FILLER WIRE WITH SHIELDED GAS. CLASS IV SPECN IRS: M-46/2020, GRADE AS PER AWS A5. 29/2010 GRADE E81T1-W2C SIZE 1.2MM IN SPOOL OF 12.5 KGS EACH. (THE GROSS WEIGHT OF SPOOL I

EYE PROTECTION GLASS FILTER WITH FILTER COVER FOR WELDING HAND SHIELD USED FOR ELECTRIC/ARC WELD ING OR CUTTING.SIZE-105 MM X 80 MM X 3 MM THK.(ACCEPTABLE SIZE-108 MM X 82 MM X 3MM THK.) COLOUR-DARK

SOLID MIG/MAG WELDING FILLER WIRE, CLASS VI SIZE 1.2 MM (SPEC.NO.IRS M-46/13 WITH AMENDMENT NO.1 GRADE ER 308 L AS PER AWS:A5.9-10)IN SPOOL OF 12.5 KGS/ROLL specn: (SPEC.NO.IRS M-46/13 WITH AMENDMENT

EYE PROTECTION GLASS FILTER WITH FILTER COVER FOR WELDING HAND SHIELD USED FOR ELECTRIC/ARC WELD ING OR CUTTING.SIZE-105 MM X 80 MM X 3 MM THK.(ACCEPTABLE SIZE-108 MM X 82 MM X 3MM THK.) COLOUR-DARK

SOLID MIG/MAG WELDING FILLER WIRE, CLASS VI SIZE 1.2 MM (SPEC.NO.IRS M-46/13 WITH AMENDMENT NO.1 GRADE ER 308 L AS PER AWS:A5.9-10)IN SPOOL OF 12.5 KGS/ROLL specn: (SPEC.NO.IRS M-46/13 WITH AMENDMENT

Manufacturing, fabrication, foundation and erection of Hut made of metal sheet and angle of size 40/5 (+/- 5%) structure of size 8 feet x 8 feet x height of 9 feet with slopping roof having window of

MODIFICATION OF GS/RR VEHICLE ( WIRING, MATTING & WELDING COMPLETE)

Supply, Installation and commissioning of Portable DC Welding Generator