Fabrication Tenders in Gujarat

Rate Contract for Fabrication and Erection of Canopy at different retail outlets under Gujarat State Office

Welding Electrodes for Bus Body Building Parts as per IS 814:2004 (with Latest Amendments) (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two ... category Welding Electrodes ...

Hot Rolled Steel Flats as per IS 1730 (Q3), Steel Flat as per IS 2062 (Q3), Welding Electrode - Covered Arc Welding Electrode - Basic Type (BEML) (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Temping Screw 1, Temping Screw 1.5, Temping Screw 2, Magnatic Bit, Grinder Wheel Iron 4, Grender Wheel 4, Grender Wheel Wood 4 Flap Disc, Zig Saw Blade Iron, Zig Saw Blade Wood, Plywood 12mm, Welding Rod 3.15 No 10, Welding Rod 2.50 No 12

Hot Rolled Strips Flats (Q3), Hot Rolled Round Steel Bars as per IS 1732 (Q3), Welding Rods and Filler Wire for Gas Shielded Arc Welding of Structural Steel as per IS 6419 (Q4), Emery Cloth (Q3) MSE Exemption for Years of Experience and Turnover

Acetylene Pressure Regulator as per IS 6901, Gas Cutting Nozzles, Rubber Welding Hoses as per IS 447, Flash Back Arrestor, Blow Pipe for Welding and Cutting as per IS 7653 (V2), Doube Stage Oxygen Regulator as per IS 6901, LPG Regulator as per IS 6901

AUTOMATIC VOLTAGE REGULATOR AVR BRUSH, RECTIFIER METALLIC TYPE L18 DISTBLD, BUSH SET, ROD WELDING SILICON BRONZE 1.60MM, LOCK PIN

Supply fabrication installation and testing of 6 inch LPG line for Carousel at Vadodara LPG Terminal Dumad

Operation And Maintenance Of HVAC System (Heating, Ventilation And Air Conditioning System) - HVAC dust fabrication and installation

Kindly note nature of job is urgent and needs to be completed in time frame given. Kindly upload signed ,stamped copy of GCC and STC.

Custom Bid for Services - Design Supply and Installation of Mechanical seal for DE and NDE side complete cartridge inclusive of plan 31 cyclone separator API plan 31 piping of SS 316 SHL 600 including fabrication and installation at IPS Thamna of ... including fabrication and ...

WHEEL ALIGMENT, HEAD REPOWERING AND LATHE WORK AND WELDING, AC GAS REFILLING WITH SERVICE, GEAR BOX REPAIRED, RADIATOR LEAKAGE REPAIR

Gas Soldering Iron Butane Blow Torch Portable Solder Iron Gun, cordless welding burner pen: Maximum, Compatible Butane Cartridge 250 ml

OSCILLATORS DVM (Q3), REQUEST FOR PROPOSAL FPR FABRICATION, TESTING & DELIVERY OF SAPCE QUALIFIED LOCAL OSCILLATOR AT 1176 (Q3)

design, engineering, procurement of materials, fabrication, assembly, inspection, packing and supply of UPGRADED FILTER ELEMENTS FOR FEED FILTER

Custom Bid for Services - SHIFTING OF KHUKRI SHIP MODEL, Custom Bid for Services - FOUNDATION OF SHIPS WITH TILES, Custom Bid for Services - 12 MM GLASS WITH STEEL CHANNEL, Custom Bid for Services - STEEL STRUCTURE OF GLASS CABIN, Custom Bid for ... AND FABRICATION WITH ...

MIG WELDING WIRE (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Bidder Turnover, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2026/B/7070675 Dated : 05-01-2026 Bid Document 1/6 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

M 20 Ready Mix Concrete, Reinforcement Steel TMT, Labour Charges, Foundations Bracket excavation comma PCC and drainage bracket close, Steel Structure, CGI oblique PPGI Sheets, Electric Wiring comma lighting and earthing, One 500 Litre solar water heater, HDPE Storage tank 1000 Litre with accessories and M S Staging, Plumbing arngs incl PVC connections

CRANK SHAFT REPAIRED, THREAD WARNED OUT, RADIATOR LEAKAGE REPAIRED AND SERVICED, RADIATOR FITTING CHARGES, SILENCER WELDING, AC GAS REFILLED, ALTERNATOR REPAIRED

MODIFICATION of FRONT And REAR SEAT COVERS of COMMUNICATION VEHICLE (Q3), FITTING of FRONT WINDOW, MATTING INCLUDING PAINTING and WELDING (Q3)

Oxygen Gas Regulators (Version 2) (Q2), Acetylene Pressure Regulator as per IS 6901 (Q3), Welding Helmet as per IS 5983 (Q3)

SHEET CELLULAR, PLYWOOD, FEVICOL SR 998, LEATHER CLOTH, BOLT, STARTING ROPE, SPARK PLUG, FUEL COCK, MOUNTING PAD, WELDING ROD GENERAL PURPOSE

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - WT 4959 G The work of fabrication of various size Bends for Boiler Unit Nos 3 to 6 at GSECL Ukai TPS during as and when required basis BMD 2; Fabrication of various size..

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Office Space; FABRICATION OF LIFERAFT SERVICING TABLE; Service Provider

Fabrication and supply of Galvanized Iron (GI) Protection Boxes for water well as per specification /drawing of Tender document

Construction of permanent ladder, Fabrication of shed over water cooler and other related works at IPR Campus, Bhat, Gandhinagar

Design, Fabrication, Procurement of Materials, Testing at Manufacturers works, Inspection by TPIA, Packing, Supply of FLANGED RUBBER LINED SPOOL

Design, Fabrication, Manufacturing, Procurement of Materials, Testing at Manufacturers works, Inspection by TPIA, Packing, Supply of PRE INSULATED TUBE.

Rubber Welding Hoses as per IS 447 (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Bid Number : GEM/2025/B/6518600 Dated : 04-08-2025 Bid Document 1/7 Estimated Bid Value 52560 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

GI U Clamp, Flanged Strainer, Ball Valve, L andT or equivalent, Valve with FE 150 Class, Valve with FE, 150 Class, Auto Soap Solution Mixing Unit, MS Steel Pipe and Angle, Fabrication, Bending and Welding, Ball Valve with FE, L T or eq, Storage Tank, Sintex or eq., GI Union, GI Coupling, GI Tee, SW, GI Reducer, GI Elbow, BSP, GI Pipe, Medium Class B, Transportation, Loading, Unloading

Supply 3 TR Non Inverter Ductable AC, ITC 3 TR Non Inverter Ductable AC, S fixing Copper Piping 0.75 Inch, S fixing Copper Piping 0.625 Inch, S fixing Copper Piping 0.5 Inch, SL 4C 2.5 Sq mm Copper PVC insu cable, SL 25 mm dia Heavy PVC drain pipe, ... Sf MS structure wirh ... Cutting welding etc., ...

Design, Fabrication, Manufacturing, Procurement of Materials, Testing at Manufacturers works, Inspection by TPIA, Packing, Supply of INSTRUMENT AIR DRYER PACKAGE

Fabrication and erection of duct and its structural supports for ventilation in additional chiller area at KAPS-3 and 4

SHIELDFACEBLUE VISOROPEN STYLE, COTTON KNITTED HAND GLOVES, ARRESTER FLAME 52MM FOR LIGHT VEHICLE, ARRESTER FLAME 75MM FOR HEAVY VEHICLE, SAFETY SHOWER EYE FACE WASH FOUNTAIN, SHIELDFACE CLEAR VISOR OPEN STYLE, GLOVES ACID PROOF PVC 14IN, WELDING ... BOCAL WELDING , ... CHIPPING, WELDING GOGGLES ...

Aluminium Welding Rod, Gas welding Tip, Pipe Clamp, Arc Welding Rod, Nut, Black Goggles, Cutting blade for Bend saw machine, Magnetic Double Ended Screw Driver Bit, Magnetic Nut Socket, Drill Bit Sleeve, Quick grip Bar clamp, Milling Machine End mill ... Spot Welding Contact ... TIG welding rod, ... plugs, welding machine, ...

Service Creeper, Trolley Jack For Transfer Case And Gear Box, Portable Welding Machine, Single Network Toolkit Professional Net Computer Maintenance LAN Cable Tester

Sunmica Sheet 8 x 4 ft, Welding Rod, Display Board of Enemy Armour for Technical Training Classes, Diary Planner 365 Sheet, Clay Target

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Office Space; FABRICATION OF TROPHY STANDS WITH LIGHTING SYSTEM; Service Provider

Design, Fabrication, Manufacturing, Procurement of Materials, Testing at Manufacturers works, Inspection by TPIA, Packing, Supply of FABRICATED ITEMS (THERMAL MIXING DEVICE)

Supply, Fabrication and Erection of piping and equipment of Ventilation and Active Waste Management system at OESC building of KAPS Site

43064-INDUSTRIAL SAFETY HEAVY DUTY LEATHER HAND GLOVES FOR WELDER, 43065-INDUSTRIAL SAFETY WELDING EYE WEAR, 43066-KNEE LENGTH INDUSTRIAL SAFETY SHOP APRON, 43067-INDUSTRIAL SAFETY HEAVY DUTY WELDING FACE SHIELD, 43068-INDUSTRIAL SAFETY HEAVY DUTY HAND GLOVES, 43069-INDUSTRIAL SAFETY EYE WEAR, 43071-ANTY POLLUTION MASK, 43073- INDUSTRIAL SAFETY NITRILE HAND GLOWES FOR PAINER

oxygen gas regulators, Acetylene Pressure Regulator - as per IS 6901, Electrode Holder - as per IS 2641, Blow Pipe For Welding And Cutting-IS 7653

GLOW PLUG, PISTON RING, NARROW V BELT N7 41, FUEL PIPE, STARTING ROPE, FUEL COCK, ROD WELDING COPPER 3 15MM, SEALING COMPOUND ANABOND 673

FABRICATION OF EXTERMETIY OF POST, Fabrication of Inte Post, SS 316 08 mm Wire rope, SS 316 Tensioner, SS 316 Cable Extremity, SS 316 Shock Absorber, SS 316 Pass through Trolley, SAFETY HARNESS, carabiner, Kernmantle Rope with Rope grab FallArrestor 10 mtrs, SS 316 Intermediate bracket, INSTALLATION COST, MOBILISATION CHARGE

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Office Space; Fabrication of Rat guard for ALH MK-III; Service Provider

Supply, fabrication and installation of Structural walkway and pipe rack for VDPP Building and Scrubber unit at Heavy Water Board Facilities, Vadodara

Fabrication, Assembly, Testing and Supply of Linear Induction Motors and Additional Cores as per the detailed specifications mentioned in the tender documents

Augmented Welding Simulator (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Bidder Turnover, Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6599435 Dated : 22-08-2025 Bid Document 1/11 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 2430000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 72900 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 24 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : 2/11 PRINCIPAL Government Engineering College Palanpur, At and Po-Jagana, Ta- Palanpur, Dist-Banaskantha-385001 (Kesarabhai Bhikhabhai Judal) Splitting

Covered Electrodes for Manual Metal Arc Welding of Stainless Steel and Other Similar High Alloy Steel (V2) conforming to IS 5206 (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No ... Arc Welding of ...

Hex head self drilling screw, Hammer drill bit, Heatex Glue, 2 Part screw driver, 4 Part screw driver, Taparia 1541-8 Nail removing plier, Hacksaw blade, cross pein hammer, wood chorsi, Welding Rod, door latch, welding glass, Metal Drilling Bit, Wooden Drilling Bit, Measuring Tape, Binding wire, Jigsaw Machine Blade, Bandsaw Machine Chakri Carbon, Kaanas, Sunmica Sheet