Fabrication Tenders in Jharkhand

Fabrication of 10nos safety Board for writing Road signs instructions safety slogan traffic rules etc for Railway siding Karo Karo OCP BnK Area

Running Contract for Fabrication and Supply of 6400 mm Over-Riding Curved Switches for 60E1 Rail on PSC Sleepers for 1in 8.5 Turnout as per RDSO Drawing No. T-4966 with Alteration 9 in accordance with RDSO standard drawing No.T- 4865 Alteration 9 and ... for fabrication purpose ...

Fabrication and Supply of 6400 mm Over-Riding Curved Switches for 52 Kg Rail on PSC Sleepers for 1in 8.5 Turnout as per RDSO Drawing No. T-4866 with Alteration 8 in accordance with RDSO standard drawing No.T-4865 Alteration 8 and conforming to IRS ... for fabrication purpose ...

Diesel driven welding generator (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Experience Criteria, Bidder Turnover, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 10 Bid Number : GEM/2025/B/6963211 Dated : 13-12-2025 Bid Document 1/8 Number of Auto Extension count 1 Bid to RA enabled No ITC available to buyer Yes RCM Applicable Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 5000 ePBG Detail Required No (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : GM (F&A), GOM GM (F&A), GOM BANK ACCOUNT NO. 00000011723508228, SBI GUA ORE MINES, IFSC : SBIN 0016004 ADDRESS FOR CORRESPONDANCE : GM (MM), GUA ORE MINES, GUA, DIST : WEST SINGHBHUM, JHARKHAND -833213 (Gm) 2/8

1. New making of silencer of Dumper. 2. Assembling of silencer with dumper.

1. Dump body damaged portion cutting by gas. 2. Dump body damaged portion straightening by gas heating. 3. Dump body damaged portion welding by steel electrode.

Repairing of ring circle swing gear mounting base crack portion by gauzing and welding with joint electrodes of CK300 Shovel Exc 2587 of Gidi A Project.

Repairing/replacement of feed system maintenance kit as well as welding in base plate of jack cylinders of drill machine IDM 30 sl no RD-1175.

1. Front bucket broken lip portion removed by gousing electrode. 2. New lip making and welding by steel electrode. 3. Front bucket lower damage plate cutting.

1. Repairing of broken portion of mast. 2. Broken portion mast V shape gouging. 3. Mast alignment by hyd. jack. 4. Mast welding by steel electrode.

1. Front bucket broken lip portion removed by gousing electrode 2. New lip making and welding by steel electrode. 3. Front bucket lower damage plate cutting.

1. Dump body damaged portion cutting by gas. 2. Dump body damaged portion straightening by gas heating. 3. Dumb body damaged portion welding by steel electrode.

1. Front damage plate cutting. 2. New plate welding. 3. Blade damaged lower portion cutting. 4. Blade lower portion development. 5. New blade slider bracket making.

Repairing of damaged front safety guard and door lock, door gate setting and welding of BE1000 Hydraulic Shovel SL.No.10226 of Kuya OCP, Bastacolla Area IX

1. Front bucket broken lip portion removed by gousing electrode. 2. New lip making and welding by steel electrode. 3. Front bucket lower damage plate cutting.

1. Damage blade arm broken plate cutting in side lower and upper side 2. New plate cutting, setting and welding in side lower and upper plate

1. Front bucket broken lip portion removed by gouging electrode 2. New lip making and welding by steel electrode. 3. Front bucket lower damage plate cutting.

Complete Fabrication of conveyor chain tail shaft assembly with spares as standby for IR make Feeder Breaker installed at Tarmi Siding of SDOCM Project

For job of alteration, re-making and fabrication of motor pump base for pump installed at quarry no. 2 and 3 under Kathara Colliery

FABRICATION OF FRONT and REAR MUD GUARD MOUNTING BRACKET AND FIXING SAME WITH MUD FLAPS IN 08 (EIGHT) NOS. BH100 DUMPER OF RAJMAHAL PROJECT

For fabrication of 01Nos Pontoon ( Size- 24ftX24ft), and 01Nos man. Pontoon for smooth pumping operation of 2000GPM pump at Nichitpur Colliery, under Sijua Area.

Supply, Laying, Fabrication, fitting and fixing of concertina coil/barbed wire and repairing of metal fencing and gate at 132/33 kV GSS, Rajkharsawan

Manufacture/ Fabrication, Testing, Assembly, Inspection and Delivery of Reversing Mechanism and Reversing Winch (Pkg. No. SM-401A), on F.O.R. Bokaro steel plant site basis.

Repairing work towards fabrication of 01 no. float H-Arm Assembly for Tata Hitachi excavator model ZX 650H at Tapin North OCP, Hazaribagh Area

1. New making of crowd motor foundation plate 4 nos. 2. Two nos hole each plate making. 3. Each plate two nos hole thread making.

1. Dismantling of different components. 2. Current variable spindle. 3. Selector on off switch. 4. New coil making. 5. Testing and fitting.

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. New making of crowd motor foundation plate 4 nos. 2. Two nos. hole each plate making. 3. Each plate two nos. hole thread making. 4. Cutting of foundation plate 4 nos.

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

FLEXIBLE POLY VINYL CHLORIDE (PVC) FLOORING SHEET. SIZE: 2 MM X 1620 MM X 7000 MM FOR NON AC COACHES. MATERIAL AND SPECIFICATION:RDSO/2006/CG-12 (REV-1)/AUGUST 2008 WITH 3 AMENDMENTS, LAST AMENDMENT NO.3/AUGUST 2016 AND CORR. NO.1/JUNE 2015, COLOUR - ... PVC WELDING ELECTRODES ...

1. Broken boom foot gousing by electrode. 2. Boom foot both side cutting and setting. 3. Boom foot both side welding by steel and low hydrogen electrode.

1. Damage blade Arm broken plate cutting inside lower and upper side 12ft x4 inch 2. New Plate cutting setting and welding inside lower and upper plate

Different type of repairing work i.e. rear suspension pin, pin of hoist cylinder welding of engine guard and reeling for D 1027 and D1126 GIDI A COLLIERY

1. Cracked portion of chassis both side gouging. 2. New bolts, nuts and washers 07 nos fitting. 3. Cracked portion chassis both side welding by steel electrode.

1. Welding and rebuilding of worn out splines. 2. Machining of rebuilding splines. 3. New splines cutting on shaper machine. 4. Final finishing of splines both side.

Repairing of Catwalk, railing both sides and foot step and damaged dump body with support plate welding reinforcement work of BH60M Dumper sl.no.-D60000, D60016 and D60396.

1- Hydraulic Circuit Extension Lift Cylinder Complete Dismantling, Removing and Fitting. 2- Hydraulic Circuit Extension Lift Cylinder Bore Portion Scratch Welding, Machining, Honing and Polishing Proper Size.

1. Both side bracket broken portion cutting by gas and gousing electrode. 2. Old bracket cutting from grounded machine. 3. Bracket both side welding by steel electrode.

1. Cracked portion of chassis both side gousing. 2. New bolts, nuts and washers 09 nos fitting, 3. Cracked portion chassis both side welding by steel electrode.

1. Broken boom foot gouging by electrode. 2. Boom footing both side cutting and setting. 3. Boom footing both side welding by steel and low by electrode.

1. Damage blade arm broken plate cutting inside lower and upper side 12inchX 4 inch 2. New plate cutting setting and welding inside lower and upper plate.

1. Damage blade arm broken plate cutting in side lower and upper side-12x4 2. New plate cutting, setting and welding in side lower and upper plate

Following repairing is to be done in CAT-773 Dumper SL.No.1043,1047,1057 and 1059. 1.Repairing work of damaged dump body with plate re enforcement, support welding.

(i) Bucket cylinder piston rod welding, Bush fitting and machining. (ii) Bucket cylinder piston rod scratch portion dispositioning and machining (iii) Piston rod grinding, honing and polishing.

For cutting and dismantling of 2 nos.(21ft x21ft) Pontoon and fabrication for installation of 4000 GPM Pump for dewatering in OCP under Sijua Area.

Mechanical Works Including Of Supply, Fabrication, Erection, Installation, Commissioning Of Different Product Pipe Line, MVWS Sprinkler Systems With Required Fittings, Valves and Related Miscellaneous Works

Please Refer ANNEXURE B in Tender Document

1. Bucket lower and upper damage plate cutting by gas. 2. New plate cutting size 4 ft x 3 inch 3. Plate setting and welding by suitable electrode.