Fabrication Tenders in Jharkhand

Providing fabrication and erection of 01 no. 20 Mtr height tower for heightening of 6.6KV OH lines at New Inpit feeder of Rajmahal OCP

Shop Fabricated Fully Bolted Tubular Bracing as per Fabrication drawing & Technical specification (Q3), Shop Fabricated Hand Rail Including Galvanization at rate of 610 gm/sqm as per TS (Q3), Shop Fabricated Fully Bolted Structures as per Fabrication drawing & Technical specification (Q3)

Fabrication of 01 (one) shed/ covering for switch and transformer room near weighbridge at Sendra Bansjora Colliery under Sijua Area

For Fabrication and Modification of remote desk of 11KV 800A, VCB Switchgear installed in control room at SBRS,Sijua Area

(A) Repairing and fabrication of 1 no. tippler making of 4, 5 6 incline (B) Repairing and fabrication of AKGI haulage base repairing of 4, 5 6 incline of Dhori (K) colliery ,Dhori Area CCL

Repairing and fabrication of Operator cabin with fabrication New Glass frame and new 05 Nos. Safety glass fitting along with rubber bit and key in Motor grader BG-825 Sl. No. 25013 of Kathara OCP.

For fabrication of Roof fencing and crowd motor platform railing and removal of broken propel intermediate shaft, fabrication and fitting of new propel intermediate shaft of EKG Shovel Sl.No. 577 at AKWMOCP , KATRAS Area BCCL

Diff. types of fabrication, machining and repairing work i.e.4000GPM shaft coupling bore machining, Keyway making,2000GPM shaft coupling bore machining, Keyway making, cutting and making coupling boss, fabrication coupling pin etc of Muraidih, AMPC

For modification of fuel tank and fabrication of side support and brackets and rep. of back side platform and railing and fabrication of tools box of IDM30 Drill DR-226 at AKWMOCP, KATRAS AREA, BCCL

New making/fabrication of cabin front guard and fitment and all damaged cat walk railing removed and fabrication new railing and foot rest of 988H CAT Pay Loader Sl. NO. 2878, CIL No. FEL-199.

For the fabrication of (I) Pontoon of size 21 ft x21 ft (II) manual Pontoon of size 8 ft x6 ft (III) installation of 4000/2000 GPM Pump/Motor Set with base Plate on Pontoon at Bansjora Colliery.

Repairing of Mobile Welding Set of TATA-1613 Service Van, Sl. No.- JH10V-7601 of AMP colliery.

Complete Rewinding and Repairing of 02 Nos. Welding Transformer 440 Volts, 400 Amps at Sudamdih Coal Washery.

Repairing of 01 No. of Rotor and 01 No. Rewinding of welding machine of Moonidih Coal Washery.

Repairing / welding of worn-out cutting edge of motor grader BG825 SI No. 25083 CIL No. G529.

For repairing of bucket bushing and welding of EKG Shovel HMB-492 at AKWMOCP, KATRAS AREA, BCCL

Repairing of Kirloskar make Welding generator 26.5 kW, 400 Amp, 415V 1 no. of Gidi A Project.

350 No 10 INCH Dia MS Pipe Flange Supply and Welding for 2nd Pipe Line at ROCP.

REPAIRING OF LADDER AND CABIN BY CUTTING WELDING OF BH1100 DUMPER SL NO 90017 OF KDH PROJECT

Complete Repairing of Welding Transformer, 440V/70V, Sl.No. SWS/WT440/04 of Moonidih Project site Work Shop

For repairing of bucket bushing and welding of EKG Shovel HMB-579 at AKWMOCP , KATRAS AREA, BCCL

For repairing of bucket bushing and welding of EKG shovel HMB- 577 at AKWMOCP, KATRAS AREA, BCCL

Repairing of crowd mechnism system and rapairing of ladder, welding box and catwalk of EKG Shovel 564.

Changing of sprocket segment oval hole welding and hole making of T-2712 Dozer of Bokaro OCP

Phased Array Ultrasonic Testing (PAUT) of boiler tube welding joints and oxide scale measurement of boiler tubes

Removing the single/SWR rail into LWR by welding the existing rail in Ranchi, Hatia & Muri Yard.

Rewinding/ Repairing of 03 Nos. Welding Machine and 20 Nos. Of Ceiling Fans of Moonidih Coal Washery.

Repairing of rotating blade supporting system mounting hole making and welding at mounting plate of Grader 3134.

Repairing of challenger welding generator set fitted in Service Van JH10Y8530 at Nichitpur OCP of Sijua Area.

Complete Repairing / Rewinding of Welding Machine Kolkata Make 400 Amp Input 550/440 Volt at Bastacolla Colliery.

Repairing of mast ladder and railing cutting straightening and welding of Drill 256 at ADIC Kusunda Area

Construction of RCC Drain with slab From welding garage to sunder Kujur house at Ward no. 01

For repairing of bucket bushing and welding of EKG Shovel HMB-439 at AKWMOCP, KATRAS AREA, BCCL

350 No 10Inch Dia MS Pipe Flange Supply and Welding for 3rd Range Pipe Line at ROCP.

complete rewinding of 400 Amps, Indarc make, welding transformer 550/440V of Dhansar Pit under ADI Colliery

Rep of crowd shaft housing by cutting , welding, grinding of EXC-2500 of Govindpur Ph-II OCP

For repairing/reconditioning of welding generator of mobile service van JH05G/6605 at AKWMOCP, KATRAS AREA, BCCL

Repairing/Rewinding of 550V Oil colled Welding transformer of Auto workshop Laikdih at DBOCP under CV Area.

COMPLETE REPAIRING/ REWINDING OF ONE NO WELDING MACHINE (450A, 550 V/440V) OF AAWS UNDER KATRAS AREA

Link cutting from old and serviceable chain and fitting of 602 drill it to machine by welding.

Repairing of 02 Nos. welding m/c 400 Amp. of EnM workshop at PEOCP under Hzb Area.

Brake overhauling and Transmission repairing, welding of BEML 0505 Payloader of H.V.Section, Bhurungia of Mohuda Coal Washery

Repairing of welding generator set of mobile service van,chassis No.QVE330527 of Kuya OCP, Bastacolla Area IX

Rewinding/ Repairing of 03 Nos. Welding machine and 15 Nos. of Ceiling Fans of Moonidih Coal Washery.

1.Boom cracked portion gauging. 2.MS plate 10mm 1.5ftX2ft 4 nos and 2ftX3ft 3 nos cutting. 3.Ribs cutting and welding by steel electrodes. 4.Boom cracked portion welding by steel electrodes. 5.MS plate welding by steel and low hyd. Electrode

1. Safety glasses with new rubber bit and rubber lock. 2. Operator cabin repairing denting welding repairing glass frame denting welding and door gate straightening and fitting operator cabin repairing of IDM-IV sl. no. 201406832 and Sandvik drill

Repairing of water tanker accident portion damage cutting and welding straightening and fitting and realign guard welding and fitting of dumper sl. no. 1099. Glass frame and fitment of safety glasses with new rubber lock, water tanker pipe line

Fabrication and Erection of water cooling machine stand for the DG Station Moonidih, WJ Area

Repairing, fabrication/erection of rake loading bunker gate / chute in Railway Siding at Sawang Washery.

Fabrication and Installation of One Barrier Near the New Weighbridge at Coal Dump Under ABDKC