Fabrication Tenders in Jharkhand

Repairing of propel motor coupling opening fitting, shaft welding grinding key way making and both side propel gear box cover straightening, hole making and fitting with nut and bolt and bucket door repairing welding and alignment setting of EKG-564

Complete repairing of both side frame assly. LHS and RHS Arm eye new making, LHS and RHS bracket welding, carrier roller foundation, brace arm crack repairing, welding and groove making in both side cracked shaft of track frame assly. Transmission gu

Continuous electric welding of bracing member at every angle joining points and tack welding in half round of nuts from Loc. No 111 to 185 (Total -75 nos.) in 132 KV RKSN-Kendposi Transmission line under jurisdiction of TSD, Kendposi.

Repairing of both side brace assly, Head cap hole making, 03 broken bolt remove thread making, cap and bushing fitment both side idler shaft broken pieces welding machining track chain cutting fitting welding of Dozer-11971 in R/O AKKOCP

Continuous electric welding of bracing member at every angle joining points and tack welding in half round of nuts in transmission towers from Loc. No. 232 to 258 in 220 kV Ramchandrapur Joda tr. line under the jurisdiction of TSD, Kendposi

For repairing of blade back portion eye end 04 Nos. worn out bore welding and line boring and blade arm eye end 04 nos. worn out bore welding and line boring Dozer Sl. No. G-11550 at AKWMOCP , Katras Area, BCCL

Repairing of loader main centre bearing replacement bearing place housing damage bore welding 70 MM oval bore welding shape size bore making by line boring machine attachment fitting bore making and replacement of bearing cap chasis body OF PL 270

Repairing of right side of boom foot eye mounting place sized pin opening by hydraulic press oval bore repairing welding and machining pin welding machining and new bush making and fitting of pay loader PL-319 at AKKOCP, BnK Area

Following repairing is to be done in Tata Hitachi Model ZX650H BE Shovel Sl. No.- 195. (1). Repairing of cracked ring gear housing car body from inside and outside V cutting, welding and grinding, support plate fitting and welding, (2). Partial

For repairing of blade back portion eye end 04 Nos. worn out bore welding and line boring and blade arm eye end 04 Nos. worn out bore welding and line boring Dozer Sl.No. G-12840 at AKWMOCP , Katras Area, BCCL

Repairing of dipper stick handle pin, bush oval bore material depositing 04 layers full round as per shape and size, bore grinding side face welding and grinding bore making steel bush press fitting welding both side and connecting assembly and fitti

For repairing of mast stand and AC element housing, track frame roller broken bolts out and re-threading , track frame guard cutting, welding, track chain cutting pin welding and machining of Drill Sl. No. DR- 159 at AKWMOCP, KATRAS AREA, BCCL.

Fabrication / Erection of different pipeline 15 mtrs. and 10 mtrs. 350mm pipe, 220mm pipe repairing and changing work and fabrication / Erection and replacement of Dewatering Screen strip changing work etc at Deshaling Section of Sawang Washery.

For fabrication of center reverse gear 06 nos. cover plate new making and new fabrication of center reverse gear main shaft new making of Motor grader BG-825 Sl. No. 25007 at AKWMOCP, KATRAS AREA, BCCL

FABRICATION OF 25 NOS.ELECTRICAL PIPE POLE OF 6INCH X8INCH MS PIPE (FROM OLD AND DAMAGED PIPES FOR ELECTRIC LONG POLE AT AKWMC.(2) NEW FABRICATION OF REST SHELTER (SHED ROOM) FOR PUMP OPERATORS WITH SEAT MAKING

Fabrication of 02 nos. rest shelter for Turio and Kalyani river side pump and fabrication of coupling guard of pump for safety purpose at different locations for water supply and mine dewatering under SDOCM, Dhori Area

Club work 1- repairing/maintenance and fabrication of platform structure for weighbridge no. 01, 10 and BS-II Bachra Siding under CHP-CPP, PPR. 2-Dismantling, Fabrication, and Installation of Platform of Weighbridge No. 11 u

(1) FABRICATION OF 8IN DIA REST CLAMP AND 8INCH PIPE CLAMP AT AGKCC UNDER,KATRAS AREA.(2) FABRICATION AND ERECTION OF ONE 4INCH DIA 05 LAND PART PIPE VERTICALLY 20FIT HEIGHT FOR WATER FILLING IN TANKER

Repairing of leveling jack broken chassis welding of IDM-30 drill Sl no RDC-1315 of Bokaro ocp

1.Welding of partially broken part of the gear assembly. 2.Welding of the worn out portion of the gear assembly. 3.Cutting of tooth splines of the gear assembly on milling machine. 4.Crowd motor platform straightening, welding and setting.

Repairing and fabrication of A two nos of Pump base frame, two nos of Direct Haulage Base Frame and 5 inch and 6 inch suction nipples

Design, Manufacture/Fabrication, Testing, Inspection and Delivery of Ball Valves F.O.R Bokaro Steel Plant site basis

Repairing of feed sprocket 08 Nos and fabrication of crossponding pins and bushes of EMCO ELECON Drill SL.No.DR215 of Kuya OCP, Bastacolla Area IX

Fabrication and fitment of Lower steps(two nos. for each dumper). For Dumpers sl. no. 3673,3675,60060,10343 deployed at Topa OCP, Kuju Area.

Repairing of Welding Generator set ( DC), Kirloskor make, Sl. no. 850308-3 of Dozer Section of ABOCP of Block-II Area

Rewinding and repairing of 600 Amp, 440 Volt Welding Transformer of RECP 750E Drill Sl. no. 502 of ABOCP of Block-II AreA

FABRICATION OF NEW SHED SIZE 12 X 10 FOR STAFF SITTING INSTALLATION AT SIJUA CHP AND FABRICATION OF NEW SHED 10X10 FOR STAR DELTA STARTER OF 60 MTR LONG CONVEYOR BELT AT SIJUA SIDING UNDER KATRAS AREA

Dismantling of damaged iron materials of bottom portion Gallary along with supporting materials and repairing the same by fabrication of old iron materials and fabrication and fitting of stringer frame of feeder breaker no-1 Muraidih, AMPC

1)Reorg. of OH line for lighting purpose including fabrication and errection of foot overbridge between two crussher (2)Fabrication and erection of shelter and lifting arrangment and dust supression set up ,at feeder breaker,AADOCM siding.

Miscellaneous type of jobs such as fabrication of different types of safety board bore making of 2000gpm pump coupling painting in switching repairing of feeder breaker conveyor chain fabrication of pontoon balancer repairing of rock breaker numberin

Repairing/Fabrication of worn out removed guide roller assembly 04 Nos. (02 set) and fabrication of take up axle Bracket 04 Nos. (02 set) of EKG 5A Shovels Sl. No. HMB 581, 592 and 596 of JOCP.

fabrication and rough casting of CI barrel for bearing cover of 4000/3000/2000 GPM Pumps and Motor etc.(Size 9inch O.D x 1.5 inch thickness) 16 Nos. SBC(ii)and fabrication (casting machining) of 2 Nos. of Motor Housing end Cover(Dala) and 3 N

Fabrication of chain link plates and rear tail/centre plate of feeder breaker No.02 in respect of AKK OCP, BnK.

REPAIRING/ REWINDING OF 50 KVA, 600 AMP, 440 VOLT WELDING MACHINE SL.NO.06 AT AKWMC, UNDER KATRAS AREA.

Repairing of stick arm crack welding of Model ZX650 TATA HITACHI EXC 2961 of Govindpur Ph-II OC

Repairing Cutting,denting,welding,crack repairing of dump body of BH100 Dumper sl no 1281 of KDH Project

Complete Repairing / Rewinding of 400A Transformer ARC Welding Machine Kirloskar Make Sl. No- 8002-01-44 of KOCP.

Repairing/rewinding of welding machine ,300A Sl. No. S/G/70 of south Govindpur Colliery under Govindpur Area.

Repairing of boom foot pin eye welding and machining bush changing bore grinding and fitting of TH 186.

Complete rewinding of 35KVA Welding Transformer SI.No-ABG/LT/WLD-TRNS/108 of ABG Colliery under Govindpur Area

Repairing and rewinding of welding generator of Mobile service van Reg. No. JH10V 5174 of DOCP Kusunda Area

Complete Repairing and Rewinding of Welding Transformer 32KVA, 400Amps, 440 Volt, 3 Phase of BNR Siding ROCP/SJ.

Repairing and fitting of tooth holder and tooth pointed locking and welding of CKE300/159 of Bokaro OCP

REPAIRING OF 600 AMPS. WELDING MACHINE MAKE- MEMCO VOLT-380/440, SL.NO. MH6915 OF AMP COLLIERY BARORA AREA.

Repairing of cabin glass denting, cutting, Welding, fitting and safety fitment of drill RDC 1405 of Sirka OCP.

Repair of Gear Drive assy and cutting , welding and straightening of boom of 12XW ACE Crane sl.no.648

Repairing of Hub bearing portion by welding and Machining for Dumper Sl. No. HD3502 at DOCP Kusunda Area

Pipe line carriage, laying, welding, at MANGARDAHA NALA to 4216 pond and angle welded under CHP-CPP, Piparwar.

mechanical repair works with MS strips cutting and welding to the platform in WB no05 under AKK OCP

For repairing of track bar welding of EKG Shovel Sl. No. HMB-579 at AKWMOCP, Katras Area, BCCL