Fabrication Tenders in Jharkhand

FABRICATION OF 6 INCH 8 INCH and 10 INCH DIA M.S. PIPE BEND AND SORT PIECES FABRICATION BY CUTTING, WELDING and ALLIED JOBS FOR AKWMC OKCP UNDER KATRAS AREA

FABRICATION OF 10inch M.S. PIPE 12 MTRS. WITH FLANGE BOTH SIDE WELDING AT CHP AKWMC OCP UNDER KATRAS AREA

Cutting, welding, fabrication and assembling of V return stranger frame for conveyor 1016 and 1017 under CHP-CPP, Piparwar

Dismantling and Erection of worn out and damaged steel structures of Conv. 5/6 junction house in coal yard of CHP.

Making steel structure board frame work under Amrapali Project of A-C Area

FABRICATION WORK FOR INSTALLATION AND COMMISSIONING OF SUBMERSIBLE PUMP IN 5 PIT OF KB 5/6 PIT COLLIERY AND 01 PIT OF PUTKI COLLIERY UNDER PB AREA.

Dismantling, Fabrication and installation of steel structure for platform of Lighting Transformer at Mines, Epoxy Painting (Aluminium Colour) with red oxide zinc chromate primer with nomenclature on LT n HT Poles at Rajrappa project

Cleaning and painting of transformer and MS structure of 33/11KV South Loyabad substation under kusunda Area.

Fabrication and Supply of Steel Structures including TOPR, in accordance with Technical Specification No. MEC/S/E254/A/10/12/0813 required for rebuilding of Coke Oven Battery no. 6 at SAIL, Bokaro Steel Limited (BSL), Jharkhand

Repairing of rear and left side railing straightening welding, fitting with nut bolt, compressor oil cooler cleaning, gauging work and complete repair of LHS chain guard 02 nos. with tap threading work fitting and welding work IDM-30 Drill Sl. No 752

Repair and Fabrication work of A) monkey catch- 20 sets, B) Stop block for track line-14 Sets, C), Friction roller and its frame making 15 Sets along with different misc. fabrication job at 4,5,6 incline, Dhori (K) Colliery.

Periodical maintenance of structural steel work and allied worksat different places as per demand of user section in power house at DVC , KTPS, Koderma.

Periodical maintenance of structural steel work and allied works at different places as per demand of user section in powerhouse at DVC, KTPS, Koderma

Fabrication and fitting with supply of 150 Amp, 550 Volt for welding M/C set of Gondudih CHP under GKKC.

REPAIRING OF DAMAGED SECONDARY CRUSHER DRUM AND NEW FABRICATION OF KNIFE, SETTING and WELDING AT SIJUA CHP UNDER KATRAS AREA

A) Repairing of boom base mounting , foundation,welding, boremaking, pin welding and machining hoist jack opening fitting. B) Reparing of ring gear housing mounting crackportion ineer and outer dia by welding work with plate cutting fixing by weldin

Fabrication of 4 nos. steel structure shed with supply of iron materials including MS sheeting for its roofing and covering three sides for pump and HT switches at mine area in R/O Tarmi OCP...

Repairing / Fabrication work of A) monkey catch- 08 sets B) Bevel pulley with frame 10 sets C) stop block for track line-08 Sets for 7, 8 incline

Regarding cutting, Straightening and Welding of pontoon 21 x24 and fabrication of manual Pontoon 8 x6 Installation of base palteand fabrication of Shed on Pontoon at Kankanee OCP (B) Regarding fabrication of Pontoon 20fx21 for Pump Motors at NOCP/A

Periodical maintenance of structural steel work and allied works at different places as per demand of user section in power house at DVC , KTPS, Koderma

Repairing of both broken eye of bucket by fabrication of new eye and fitting, welding reinforcement of eye and bush by welding of 04 nos round support, plate fitting reinforcement of bucket body by welding of new metal piece to keep as float.

Repairing of tilt cylinder guard straightening, making of middle tilt guard with all mounting, welding work and straightening work, fitting of lower roller guard 02 nos. of BD-155 Dozer 13630

REPAIRING OF DIPPER HANDLER BY REMOVAL AND FITTING OF STOPPER WITH BOLT AND CUTTING AND WELDING WORK AT DIFFERENT PLACES OF EKG 5 SHOVEL SL NO HMB 589 OF DAKRA PROJECT

New fabrication of take-up axle sleeve, welding machining etc of EKG-5A shovel, Exc-2500 of Govindpur Ph-II OCP.

Fabrication of bend short piece nipple and welding of flange 8in/10in dia MS pipe at Jamunia patch of ABOCP Mine

Flange welding of 10inch dia MS pipe and fabrication of half bend and full bend at Jamunia patch of ABOCP Mines

Repairing of 02 nos of coupling for 2000 GPM pump and motor side and fabrication work in foundation for 2000 GPM base plate of Topa Project under Kuju Area

Dismantling of 02 no. lighting tower, erection of 02 no. lighting tower, painting of 02 no. lighting tower and fabrication work for tower of Tapin North OCP, Hazaribagh Area.

Transporting, Laying and Jointing of 250 mtr dia. 8 inch MS pipe and installation of Pump 600 GPM at Bansdeopur OCP, Fabrication of 2 Shed 15 ft x 10 ft(ii) installation of 6 and 10 inch pipe delivery range with flange, welding with base plate fa

Structural steel work for stair of NHS (D/s)(13 block) and NHS(SS)(04 Block) and D type(03units) at Gopalpura colony under mugma Area.

Providing steel structure retro reflective signage boards at different locations of GM Unit, Kuju Area.

Painting of existing steel structures and allied Building at Silo Premises in Maheshpur Colliery under Barora Area-I

Repairing and fabrication work of engine hood, engine guard, diesel tank, radiator guard, battery box, ladder, operator cabin repairing and wiring of BG825 grader sl. no. 3254 of Jharkhand OCP.

For Tie rod foundation new fabrication and fitting welding both side of EKG Shovel Sl. No. 492 at AKWMOCP, KATRAS AREA, BCCL

WELDING AND FABRICATION OF 200 NOS 10 INCH DIA PIPE AND 400 NOS FLANGES AT WORKSHOP OF AKWMC UNDER N KATRAS AREA

MAT. CODE: W97717002035; BOLTED STEEL STRUCTURE FOR ACC AS PER TDC NO. HXE/SK/2358 REV. 00, MAT. CODE: W97717002078; BOLTED STEEL STRUCTURE FOR ACC AS PER TDC NO. HXE/SK/2366 REV. 00

FABRICATION OF BEND SHORT PIES NIPPLE 10INCH MS 8INCH MS PIPE AT LAKARKA SIDING NEW DELIVERY AKWMC OCP KATRAS AREA.(2) MISLLANEOUS FABRICATION BY CUTTING AND WELDING JOBS FOR 800 GPM PUMP AT AKWMC

Repairing/Replacement of complete undercarriage (both side) welding work of track frame with mounting hole and thread making and repairing of damaged bucket and sprocket lugs of Tata Hitachi 650 sl. No. 186.

Providing of collapsed Boundary wall with Damage structural steel work and providing Green net along the Boundary wall at Regional Hospital Kargali under GM unit BnK Area

Construction of RCC Foundation for steel Structure Galvanized tubular steel structure staging 4.5 mtr. for HDPE water storage tank and Solar panel 2000 liters capacity water storage tank etc at Chaplasi Village, Bhandaria Block under Garhwa district

Dismantling of different type structural steel structure and pipe near Sayal CHP under Sayal D Project.

Providing steel structure for exhibiting hoardings at different locations of Kuju Area, CCL under GM Unit.

Strengthening by column and steel structure under plant of different section at Sawang washery , Kathara area.

MAT. CODE: W96717001992; BOLTED STEEL STRUCTURE FOR ACC AS PER TDC NO. HXE/SK/2344 (Q3)

CUTTING ISMANTLING FABRICATION OF WEIGH BRIDGE OF RE-INSTALLATION COMMISSIONING WELDING WITH CLEANING OF WEIGH BRDGE SIJUA SIDING WEIGH BRIDGE,UNDER KATRAS AREA

Fabrication and welding of tilt guard and cover of D-355 Dozer Sl. No. G-11850 at ANTST-JG OCP, Lodna Area, BCCL.

Welding of 10inch dia flange, fabrication of half bend, full bend, short pieces required for new pipe range at Jarlahi Patch, AMP Colliery.

Fabrication of submersible pump platform, welding of flange in 4inch dia and 6inch dia MS Pipe fabrication of bend etc. required for installation of submersible pump at Budora under Phularitand section of AMP, Barora Area.

(1) REPLACEMENT/RENOVATI ON OF FABRICATION ROAD CROSSING PIPES AT DIFFERENT PALCES AT WEST SUMP AND HAUL ROAD (08INCH) AKWMC OCP AT KATRAS AREA.(2) FABRICATION OF BENDS SHORT PIECE,TAPER U AND JOINTING/WELDING

Repairing of wornout bucket eyes, welding , grinding and line boring, new Bush fabrication and bucket to arm pins welding and machining as per size of Be1000 Hyd Shovel SL.No.10232 of Kuya OCP, Bastacolla Area IX.