Fabrication Tenders in Jharkhand

Construction of 90 mtr Deep drilled tube well RCC Foundation for steel Structure and Solar panel Galvanized tubular steel structure 5000 liters water storage tank Laying of Rising and distribution pipe etc work at Chaplasi Village, Bhandaria Block

Following repairing is to be done in RECP 650 Drill SI No. 714 Repairing of mast ladder cabin Mtg Mast body compressor and engine mounting fitment work crack platform welding work Mtg Hole making.

Soil excavation and welding work of 8 inch dia MS pipe line along with 1016 and 1017 conveyor area up to 16 mtr length water supply line for plant operation at CHP CPP Piparwar

Repairing and complete replacment of sproket shaft with serviceable shaft and both side sproket mounting holes making with material filling and fitment, chain cutting, fitting and welding work of BD355 Dozer Sl. No. 13781

MATERIAL CODE: W96717011025: BOLTED STEEL STRUCTURE FOR ACC AS PER TDC NO: HXE/SK/2346 (TABLE- 2) (Q3), MATERIAL CODE: W96717011017 BOLTED STEEL STRUCTURE FOR ACC AS PER TDC NO: HXE/SK/2346 (TABLE- 1) (Q3)

(1)REPAIRING FABRICATION OF NEW SHED AND INSTALLATION WITH CUTTING AND WELDING SIZE 5 inch X 41 inch AND EXTENTION AND FABRICATION OF SHED AT OLD SUB-STATION NEAR NEW SHED SIZE 14 inch X 30 inch AT (NKAS) SIJUA SIDING KATRAS AREA. (2) FABRICATION O

Mechanical repair and maintenance with fabrication work of 03 Nos. induction motor (200KW,sr.no. 30048846, 150KW,sr.no. E116AG0HM and 150KW, sr.no. 30048862) installed at different location inside plant under CHP-CPP/PPR.

Repairing of bucket assembly and changing of 08 nos. tooth point, repairing of adaptor by welding, grinding, along with repairing of edge segment, fabrication of battery box, ladder new making, transmission guard fabrication and dismantling, overhaul

MORBUS Welding Electrode Covered Arc Welding Electrode

MORBUS Welding Electrode Covered Arc Welding Electrode

Repairing of both broken eye of bucket by fabrication of new eye and fitting in bucket by welding and reinforcement of eye by welding of hydraulic Shovel M/C Sl. No10232 of Kuya OCP, Bastacolla Area-IX.

CUTTING DISMANTLING FABRICATION OF WEIGH BRIDGE OF RE-INSTALLATION COMMISSIONING WELDING WITH CLEANING OF WEIGH BRIDGE T.C.C CHECK POST WEIGH BRIDGE,UNDER KATRAS AREA

(1) CUTTING DISMANTLING FABRICATION OF WEIGH BRIDGE OF RE-INSTALLATION COMMISSIONING WELDING WITH CLEANING OF WEIGH BRIDGE SIJUA SIDING WEIGH BRIDGE,UNDER KATRAS AREA

Fabrication and installation of nipple matching, moving flange, welding in bend for dewatering from mine with running pumps of Topa Project under Kuju Area

10inch, 8inch,6inch DIA M.S. PIPE BEND AND SHORT PIECESS, REDUCE FABRICATION BY CUTTING WELDING and ALLID JOBS FOR AKWMC OCP UNDER KATRAS AREA

Fabrication of pole by cutting and welding of damaged 6 inch and 4 inch dia pipes in respect of Konar Exp OCP, BnK Area

Cutting, Welding and fabrication of 20 no. of damaged coal tubs kept in idle condition at 7/8 incline, Dhori (K) Colliery, Dhori Area

10inch 8inch 6inchDIA M.S. PIPE BEND AND SHORT PIECES, REDUCE FABRICATION BY CUTTING WELDING and ALLIED JOBS FOR AKWMC OCP UNDER AKWMC KATRAS AREA

Repairing/replacement of Railway track supporting steel structure at defunct raw coal weighbridge of Dugda Coal Washery.

Unbranded Welding Blow Pipe with welding attachment only, Unbranded Welding Blow Pipe with welding attachment only suitable for having 300

Repairing/welding work on the cracked portion of the turret structure (upper carriage) and swing gear box foundation LHS and RHS and repairing of compressor assy of EKG5A Shovel Sl No HMB 560 CIL No EXC 2640 and repairing of latch bar with its housi

Repairing of radiator assly, its cleaning, Radiator mounting fabrication, front cover repairing and fabrication of two numbers engine stand applicable to engine model-3508 by cutting, welding, grinding and metal deposition of dumper TH-1 at AOCP.

FABRICATION OF 26 NOS.ELECTRIC PIPE POLE OF 6inch MS PIPE 4inch PIPES FOR ELECTRIC LONG POLE AT AKWMC.(2) FABRICATION OF BEND WELDING OF PIPE FOR ROAD CROSSING AT DIFFERENT PLACE OF AKWMC OCP,UNDER KATRAS AREA.

A. Machining and fabrication works of Gun metal Impellers for M and P make, 1000 GPM, Multistage stage, 3CHR/4CHR, 150/200 IPB, PLUROVANE pump in respect of AADOCM of Dhori Area. B. Making/Fabricating new base plates, pair of coupling sets with

Repair and Maintenance with fabrication work of suction pipe line 100mm dia and replacement of valve with 100mm pipe line connection installed at CD pump house and G.M.Office(Fountain) pump under G.M.Unit,Kathara

Repairing of both side wornout Bucket eye Gouging, Fabrication of New Bush fitting in Bucket by Welding and 4 Nos. round support Plate by Welding and Full Length Square round 32 mm thickness extra Support by Bucket eye

(A) CUTTING, WELDING AND FABRICATION JOBS FOR 10INCH PIPELINE RANGE AT AKWMC KATRAS AREA. (B) DISMANTLING, REMOVING AND TRANSPORTING OF 10INCH, 8INCH AND 6 INCH MS PIPE FROM WELDING CENTER TO 40NO COAL DEPOT AT AKWMC KATRAS AREA.

Structural Steel Work

Day to day cutting and welding work involving rail cutting , emergent breakdown , reapiring like SDLs bucket repair , chain repair , idler frame repair , clip etc. at 7/8 incline of Dhori Khas Colliery for 01 year period .

Maintenance and Repairing by cutting, welding and fabrication etc. as required for Rigger of Sigma Lighting Tower near weigh Bridge No-14 under Ashok OCP.

FABRICATION OF 100 NOS. 6INCH DIA MS PIPE BY FLANGE WELDING IN BOTH SIDE AT CHP PREMISES OF AKWMC OCP MEGA PROJECT OF KATRAS ARERA.

Cutting, Welding and fabrication of 12 no. of damaged coal tubs kept in idle condition at 4,5 and 6 incline, Dhori (K) Colliery, Dhori Area.

Fabrication of final drive gear box cover (02 nos.) and welding, setting and fitting in EKG Shovel HMB-481 at Nichitpur OCP of Sijua Area.

Repairing of both side worn-out bucket eye gouging, welding, griding od shape size and 04 round support plate fabrication of eye size and fabricated plate welding of full length of Bucket of Be1000 Hyd. Shovel SL.No.10223 of Kuya OCP,

MAKING OG ALIGNING OF MOTOR BASE PLATE AND FABRICATION OF COUPLING AND FITTING AT WATER FILTER PLANT UNDER SPC AND 75 HP MOTOR DALA AND COVER C.I WELDING AND BEARING PORTION WELDING AND MACHINING AS PER BEARINGSIZE AT SPC,

Repairing of rear propeller shaft by welding and grinding and repairirng of 02 nos rear tie rod by welding and grinding and fabrication of 04 no bushes by lathe operation of WS28-II SL NO -28002 of dakra project.

Miscellaneous steel structure maintenance and its associated works roof wall sheeting of Unit 7 n 8, DVC, CTPS.

Welding Electrode - Covered Arc Welding Electrode - Basic Type (BEML) (Q3), Welding Electrode - Covered Arc Welding Electrode - Rutile Type (BEML) (Q3)

Welding Electrode - Covered Arc Welding Electrode - Basic Type (BEML) (Q3), Welding Electrode - Covered Arc Welding Electrode - Rutile Type (BEML) (Q3)

Welding Electrode - Covered Arc Welding Electrode - Rutile Type (BEML) (Q3), Welding Electrode - Covered Arc Welding Electrode - Basic Type (BEML) (Q3)

WELDING ELECTRODE - Covered arc welding electrode - Rutile type ( BEML) (Q3), WELDING ELECTRODE - Covered arc welding electrode -Basic type ( BEML) (Q3)

Miscellaneous repairing, Fabrication work of A) monkey catch- 30 sets, B) Stop block for track line-24 Sets, C), Friction roller and its frame making 30 Sets for 7,8 incline of Dhori (K) Colliery.

Repairing of 1000 GPM, Make-kirlosker, Model- 6up4fb, 100 mtrs head pump with Fabrication work of base frame and misc. work related to coupling, coupling bush for said pump at PEOCP under Hazaribag Area.

Mechanical repair and maintenance with fabrication work of 05 Nos. induction motor (260KW, sr.no. 40491305, 260KW, sr.no. 30048845M, 260KW, sr.no. 30487407M, 200KW, sr.no. 30048846 and 150KW , sr.no.30048867) installed at different location inside p

Complete repair/full overhauling of 2nos 2000 GPM,10/12PLURO X3CHRS,150 m head,MandP make,multistage pumps received from Giridih W.Shop in breakdown condition required for mine dewatering including fabrication works of base plate with bolts,coupling

Fabrication of different Mechanical spares as per sample for TPP Boilers, CPP Boilers and Boiler 9

REPAIRING OF REAR PROPELLER SHAFT BY WELDING AND GRINDING AND REPAIRING OF 2 NOS REAR TIE ROD BY WELDING AND GRINDING AND FABRICATION OF 04 NOS BUSH BY LATHE OPERATION OF WS28-II WATER TANKER SL NO 28003 OF DAKRA PROJECT.

REPAIRING 04 NOS WORN OUT PIN BY WELDING AND TURNING AND FABRICATION OF 04 NOS BUSHES BY LATHE OPERATION AND REPAIRING OF TWO NOS REAR ARM BY WELDING AND GRINDING OF WS28-II WATER SPRINKLER SL NO 28054 OF KDH PROJECT.

Cutting, Welding, fabrication of 30 no. of damaged coal tubs kept in idle condition at 4, 5, 6 and 7,8 incline, Dhori (K) Colliery, Dhori Area.

Welding of flange 4inch dia M.S Pipe fabrication of bend, short pices, Tee, Tapper pipe etc required for Phularitand Section of AMP Colliery under Barora Area.