Fabrication Tenders in Jharkhand

Repairing/line boring of arm stick assembly eye hole attached with bucket, H-link bush changing, bucket eye holes rectification crack welding of BE-1000 Shovel Sl. No. G-10258 at Dahibari OCP, CV Area.

Repairing of loader main center bearing replacement, bearing place housing worn-out portion welding , replacement of bearing cap, steering cylinder eye bore repairing and repairing of bucket eye housing bush replacement of PL sl.no. 284.

Repairing, reconditioning and backfitment of left hand side railings, right hand side railing, foot steps, ladder platform, fire extinguisher stand, battery box, alternator bracket by cutting, welding, grinding and metal deposition in dumper TH-10

Dismantling of dallah hoist body, rear suspension, front suspension, all four tyres, engine with torque converter, transmission assembly by cutting, welding and grinding of from the grounded dumper D-10941 (TH-5) at Ashok OCP.

Repairing of both side final drive opening and chasis damage starching and positioning, gasket changing, shaft machining spline making as per requirement, track chain cutting, fitting and welding both side of BD-155 Dozer 13781

Repairing of both end crusher roll of Feeder Breaker No-2 along with cutting and welding of Picks with holders before and after repairing of crusher roll of Kessergarh ABOCP Mine of Block-II Area

Dismantling, shifting, laying, fitting and welding of 6 inch dia and 4 inch dia M.S./G.I pipeline with pumps at quarry 1 for different purposes in different locations of Amrapali OCP under Magadh-Amrapali Area

Repairing of 02 Nos. tie rod and 02 Nos. steering linkages by turning, welding, grinding and eye making as per stud size and its backfitment in CAT777D Dumper TH-10 of Ashok OCP, Piparwar Area

Repairing of rear shaft axle (both sides) (ii) Repairing of propeller shaft, universal joint assembly, handrail (both sides), footsteps, operator cabin , turbocharger mountings by cutting, welding, grinding and machining of CAT777D (D-11753) at Ashok

Broken track roller mounting bolt removing and thread making in the track frame of drill IDM30 DR202 and repairing / straightening of drill rod, thread making and adopter welding(float) at Nichitpur OCP of Sijua Area.

Repairing of failed greasing system, Repairing of railing, platform, cabin door, glass frame and replacement of safety glass and Repairing of differential link pin opening, fitting bush replacement 04 no., pin welding machining of D10282.

Repairing work of cracked track frame , RHS undercarriage related work upper and lower roller, lhs final drive assembly replacement with serviceable old assembly of dozer 11902 and repairing of dozer section welding machine of AKKOCP

Dismantling, repairing, reconditioning, seal changing, and its backfitment of rear suspension both side by cutting, welding and metal deposition of dumper TH 5 under Ashoka OCP. Repairing to be carried at site OR in situ.

Welding of carrying rollers and idler frame with deck plates of conveyor belt at unit no. 902-1 and 2 and 704 -1 and 2 section at Madhuban Coal Washery under Block-II Area, BCCL .

Repairing of Sprocket Boss as new Hole Making Sprocket Fitting with New Bolts and Nuts and Locking by Welding Process of Dozer of M/C Sl. No. Dozer -11832 of Bastacolla OCP, Bastacolla Area IX

Repairing/welding of main arm mounting bracket LHS which is connected with blade damaged during operation and cutting edge and end bit both side changing work of Dozer Sl. NO. 11970, CIL NO. T 3731.

Repairing of boom and arm pin damaged mounting pin place, damage bore repairing and track tensioner , left side opening, tensioner welding, fitting, chain cutting and opening Tata Hitachi 650 Sl. No. 191 of Bokaro OCP

Repairing of wornout bucket eyes pins H-Link pins and wornout arm and side link pins welding and machining as per same Size of BE1000 hydraulic Shovel SL.No.10226 of Kuya OCP, Bastacolla Area IX

Supply, laying, fixing, welding, jointing, testing and commissioning of 63 mm dia High-Pressure Fire Fighting Hose with delivery coupling, nozzle, complete in all respects at Coal Stock under Rohini Project, N K Area, CCL

Cutting and welding of damaged 8 inch dia M.S. Pipes to make Short Pieces and Bends, needed for changing the location of Pumps as and when required in Mine, w.r.t. Karo OCP, under BnK Area.

Strengthening all weak and defective weld joints through proper re-welding to store structural stability and extend the service life, along with installation of suitable stoppers to provide protection against physical damage, including replacement of

Re-arrangement, fabrication and erection of pumps suction line, making of flange, fitting of foot valve supporting structure etc. complete of delta pump and DSM6 pump at River Side under Kathara Washery.

Installation of 11 nos. tubular lighting towers by fabrication and concreting along with supply and fixing of light set and controlling at weighbridges and check post of Topa OCP under Kuju Area.

Fabrication and erection of pump motor enclose shed with lock and key arrangement on the door for the safety of pump motor shed of Konar railway siding in respect of AKK OCP

Dismantling, erection, fabrication of 3 inch dia fresh water GI pipe line near Mechanical Workshop and 2 inch dia GI pipe line near Primary Office in Raw Coal Section of Kathara Washery

Supply, laying, fabrication, fitting and fixing of concertina coil, barbed wire and lighting poles with fixtures along the existing expanded metal fencing at 132/33 kV GSS, Noamundi switchyard under TSD, Noamundi

For fabrication of Diesel tank cap to stop diesel pilferage of 09 nos. CAT Dumper Sl. No. 920, 921, 922, 923, 952, 953 , 954, 955 and 956 at AKWMOCP KATRAS AREA, BCCL

(1) DISMANTLING,TRANSPORTING AND JOINTING OF 8IN DIA M.S PIPES WITH FABRICATION JOBS AT AKWMC OCP.(2) DISMANTLING,LOADING AND TRANSPORTING OF VERTICAL OF EAST SIDE DEPARTMENTAL SIDE PUMPING STATION AND STRINGING

Fabrication and Erection of 2 Nos Delivery pipe line, Size 8 Length 860mtr each of Pumps to be fabricated and erected from East side Sump of Jarangdih OCP to the konar River

Dismantling of motor gear set with base plate, fabrication of new gear motor base along with providing and fixing of coupling and alignment of CHP trolley belt under Churi Colliery, NK Area

Repairing/replacement of L.T. Panel, fabrication/ mounting of LT panel box, Wiring of LT panel and repairing of isolator of CK300 shovel Sl. no. E-172 deployed at Topa OCP, Kuju Area.

Repair, fabrication and erection of base of gear box and its channel, angle, plate etc of unit no. 180 belt conveyor of 0-0 level in Raw Coal Section at Kathara Washery

Fabrication and erection of HT and LT bus bar arrangement with structure including manufacture/supply of 03 nos. 800 A, 440 V, ACB at IWSS substation under CCD, GM Unit, Dhori Area.

Fabrication, erection Alignment of stone discharge chutes, liner and mother plate of both side of reversible B/C discharge chute, crusher discharge chute and ROM discharge chute PCH section at Sawang washery.

Fabrication/Making of Bus Bar box (stand mounted) of size 3.0feet X 2.5 feet X 1.0 feet for distribution of 220V/440V line to Rohini Weighbridges and Lighting line in Rohini Project.

Fabrication of cast steel fan of different sizes with facing, boring, machining, cutting and drilling etc work for operation of motor of Elecon Make Feeder breaker and pumps running under Dakra Project.

Fabrication and making of secondary control panel with bus system of 630KVA, 3.3KV/440V unitized type lighting transformer with 4 nos. outgoing system of colony power supply at KOCP under Hazaribagh Area

Fabrication of drum boat of 03 (Three) Nos. , dismantling of pump from skid, its repairing with finishing, cleaning and installation of pump over another skid in mine under Ashok OCP PPR Area.

Fabrication and installation of remote control system for 5 Nos 11KV HT Control panels and 3 Nos 3.3KV HT control panel at main sub-station 11KV/3.3KV of JOCP under Hazaribag Area

Dismantling of damaged section and repairing /fabrication and installation of 9 m x 4.5 m plate from structure of W/b no. 10 and BS-II Bachra siding under CHP-CPP/PPR.

Repairing , fabrication of LHS platform, hand rail, battery box, front bumper, radiator grill and canopy of BH60M Dumper T 62 at Ashok OCP Piparwar Area Chatra .Work to be carried at site

Repairing/ fabrication of Endless Haulage Return Pulley rope groove by M. S. metal with main shaft new and commissioning at site in respect of 4,5,6 Incline of Dhori (K) Colliery, Dhori Area

Fabrication of new base plate required for 2000GPM pump and associate motor installation and mechanical repairing of 160KW, 3.3KV motor for dewatering under Balkudra OCP for Bhurkunda project under Barka Sayal Area.

Fabrication/Erection and repairing of different pathway, platform, base structure in PCH plant building and replacement of stone reject discharge chute and shuttle conveyor receiving chute at PCH Section of Sawang Washery.

Dismantling, repairing, fabrication and erection of damaged toughening bottom, top and bottom self-aligning frame with idler of unit no. 303, 304 and 307 belt conveyor of main plant at Kedla Washery

Fabrication of the diesel pump into diesel generator which will be utilized for the backup power supply to the diesel shed and biometric attendance room during power outage at ADIC, Kusunda Area.

The Heat shrink 3 number, cabling lead fabrication,3 number of earth pit for the new Installation of transformer at OCP substation and other LT line related miscellaneous work at Ena Colliery

Repairing, casting, fabrication and fitting of till hose cover of BD-355 DOZER Qty.02 sets (01set for m/c. SI.No.TR-516 and 01 set as float) at Dahibari OCP, CV Area.

Repair and Fabrication of LHS Platform, hand rail, battery box, opt cabin, cabin glass replacement, tank body and spraying pipelines and valve of water sprinkler WT8 of Ashok OCP, Piparwar Piparwar Area.

Fabrication and erection of pump motor enclosure shed for installation of standby pump motor set with water tanker filling point at khasmahal colony water supply station of konar exp. OCP BnK Area