Fabrication Tenders in Karnataka

Evacuation unit for 425 kg cylinder, Evacuation unit for 35 and 47.5 kg cylinder, Supply of inch Schedule 40 Pipe, Supply of 2 inch T 300 class, Supply of 2 inch 90 degree bend 300 class, Supply of 2 inch Strainer 300 class, Supply of 2 inch Ball ... and Fabrication of ... make, Fabrication and ...

Custom Bid for Services - Fabrication of Tensile test specimens Similar Category Selection of Laboratories for Testing of Products/Material

Fabrication of Composite Cylinder as per the assemblies 12L-4X-1050-000-000 and 12L-4X-1100-000-000

FABRICATION AND INSTALLATION OF NON LIT ACP BOARDS AT BAZAAR SHOPS, ROs, GARAGES AND WORKSHOPS UNDER KARNATAKA STATE OFFICE.

Design, Fabrication, Testing and Supply of Intermediate Flanged Hydraulic Cylinder with Mounting Diameter 6.997 inch Working Pressure 2000 psig

Fabrication & Supply of WALL MOUNTABLE STORAGE BOX Size: 600 mm width X 600 mm height 450 mm Depth (Q3)

Fabrication and Supply of Protection Box made out of thickness not less than of 3 mm GI Sheet (Q3)

Design, Engineering, Fabrication, Supply, Testing and Commissioning of 1000KVA Compact Package Secondary Substation For Solidly Earthed 3 Phase System.

Contract for Fabrication of Wooden Boxes, Storage Racks, Partition Frames, Doors etc. at URSC Main Campus, Vimanapura, Bengaluru-17

Providing, fabrication & erection of ceramic reducer 250NB x 500NB for ASDP discharge required for Unit3 Ash Handling System, BTPS

Providing, fabrication and installation of Bag filter, cage and venturi for Unit-1 Ash handling system - BTPS(1X500MW),KPCL)

FABRICATION AND SUPPLY OF HOLLOW SHAFT OF SIZE: 242 OD X 620 MM LONG MATERIAL: CARBON STEEL PIPE EN

Custom Bid for Services - Fabrication and supply of MiG Lifting Sling Trolley onboard INS Vikrant Similar Category Support Services

Custom Bid for Services - Filter Press Bomb Door Fabrication Erection including material supply as per BOM at Beneficiation Plant

A. Scope of Work: The proposed scope of work includes, but is not limited to, the following activities: I. Civil and Painting Works (Including Material): Concreting of Drainage : Repair and reconstruction of existing drainage channels to ensure ... II. Fabrication Work (Including ... Material): Fabrication and ...

providing and laying of pipe line near govindappa house to welding shop in A.D colony at ward no 8&9 in pavagada TMC limits

G.I Sheet Roofing Work to Block-2 of KPS Hitla in shikaripura Taluk Shivamogga District Scope of Work TMT Steel M20 Concrete Structural Steel Work GI profile sheet

Custom Bid for Services - REPAIR OF HP DRAIN PIPELINES WITH ARGON WELDING IN MACHINERY COMPARTMENTS VIEW CRACKPIN HOLES MATERIAL MS 10 JOB

"RECTANGULAR PLAIN GLASSES FOR WELDING SHIELD OF SIZE 4 1/2"X 5 1/4" WITH 4MM THICKNESS." ACCEPTED MAKE:AS PER TENDER

Structural Framework Fabrication of internal Wooden Framework 40x40x2mm equivalent including cutting grinding and surface preparation, Shelving and Storage units Supply and installation of shelves display units made of 18 mm BWP plywood or commercial plywood with laminate finish vener finish, Supply and fixing including transportation of shelves and display with hardwood including edge polishing and finishing, Finish to Structure PU paint Doco paint laminate veneer finish to visible surfaces including primer sanding and final coats, Hardware and Accessories Hinges drawer channels bottle holders foot rests SS Trims and all necessary accessories

Tender for curation, Design, Development, Fabrication, installation and Commissioning of Human Evolution Gallery at Chittapur Sub- Regional Science Centre, through KSTePS

The brief Scope of work involves arresting of oil leakage in bottom bell tank of GT-2 at SGS applying super seal cold welding compound

Fabrication and supply of spare labyrinth block for PCP Motor M/s NGEF Make model No. AW 800 L4 H6V1

FABRICATION AND INSTALLATION OF REINFORCED CEMENT CONCRETE GAUGE POSTS(325 NOS.) FOR SITES UNDER CAUVERY DIVISION, CENTRAL WATER COMMISSION, BENGALURU

Establishing Class - 10000 clean room (ISO-7) facility to Sensor Chip Fabrication Materials Science Division, CSIR-NAL, Kodihalli, Bengaluru - 560017.

Fabrication and Supply of 11 KV HT VCB With Transformer Protection Panel and 11 KV HT Metering Panel Outdoor Type

Fabrication and Supply of Lap Shear bonding fixture as per scope of Work and IP-C423LCA-351-MIST-011 (Q3) ()

Supply, fabrication, erection, testing and commissioning of Cooling water pump along with motor, coupling and Base frame at MGHE Works.

Design Fabrication Erection and Dismantling of Temporary Exhibition Stall for Showcasing CADA Department Activities during Mysuru Dasara Exhibition 2026 27

Fabrication of wooden cupboards Erection of false ceiling and Aluminium partitions at various locations at URSC Campus Vimanapura Bangalore 17

Fabrication and Supply of Welded Engine Interface mounting frame for Austro Engine Drg No. RUH-X-12-02-03-001

Providing Air Conditioning facility to the proposed modification to Internal Fabrication facility-I at URSC Main Campus, Vimanapura, Bangalore-560017

Fabrication & Erection of platform below dry fly ash pipe line on pipe rack at Unit-3 Ash Handling System, BTPS

Custom Bid for Services - Dismantling of Old Overhead lines and fabrication of skid mounts other pole accessories at Hilltop DIOM

Custom Bid for Services - Refurbishment of office space in fabrication department at NSRY (kar) Similar Category Repair and Overhauling Service

Custom Bid for Services - FABRICATION OF CANOPY HOOD FOR QRT VEHICLE AT INS VAJRAKOSH Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Providing, Dismantling, Fabrication, Erection and Painting of M.S Platform over Acid Tank of D M Plant 1 & 2 and as per tender document

Industrial Compressed Oxygen Gas for cutting and welding, conforming to IS:309-2005. Cylinder Capacity 7 Cu Mtrs each.. Firm offered make: Own

WELDING ELECTRODE , XUPER NUCLEOTEC 2222, SIZE: 3.15MM, MAKE: L&T OR EQUIVALENT ACCEPTED MAKE/BRAND: EWAC (Before L&T) make-EWAC NICRO 650.

Welding leather apron size length 3'6"x width 2'3" Make:- ESAB, JEWBOER, KEEN, KETSY or Similar Firm's Offer: As above Make/ Brand - SafeKraft

CO2 welding gas cylinder capacity -30 kgs confirming to IS-307, IS-7285, IS-3224, IS-5844 with CO2 gas and test certificates.

Custom Bid for Services - Fabrication supply and fixing of mild steel impeller connected to Magnesium Foundry sand blasting bag filter exhaust system, Custom Bid for Services - Fabrication supply and fixing of 2 Nos of MS Impeller of dia 640mm for ... - Fabrication supply ... - Fabrication supply ...

enquiry for CARRYING OUT OMPL LOADING ARM MAINTENANCE PIPING MODIFICATIONS STRUCTURAL FABRICATION and PAINTING JOBS AT OMPL in JETTY 13 inside NMPT

FABRICATION, SUPPLY, ERECTION AND TESTING OF SS 316 (6MM THICK) FOAM TANK OF 15KL CAPACITY, REPLACING THE EXISTING MS FOAM TANK

Design, Fabrication, Supply and Installation of Signage and Graphics for Six (06) Elevated Metro Stations of Reach-6 under Phase-II.

Facility Management Services - LumpSum Based - Commercial; fabrication of wooden cot; Consumables to be provided by service provider (inclusive in contract cost)

Fabrication, Assembly, AT testing and supply of Rotary Electro Mechanical Actuator 75Nm with inbuilt digital servo controller (REMA75) for Control Surface.

Fabrication of wooden boxes and racks for packing and transporting of satellite and allied equipments at URSC Campus Vimanapura Bangalore 17

Fabrication Supplying and erecting of portable cabins at Ullarthikaval and at Khudapura for ISRO Campus at Chellakere Taluk Chitradurga District Karnataka

Supply and Installation of The Advanced Infra-Red Thermography Imaging System required for the Composites Fabrication Laboratory at IISc - Challakere Campus