Fabrication Tenders in Madhya Pradesh

Providing, fabrication and supply of stopdam gates size-1.50m x 3.00m-10nos for Remal Baba Nipania Barrage of WR Division Sehore.

Providing fabrication, supply and erection work of gate size 1.40m x 1.40m - 6nos for Dhulsar Barrage, WR Division Manawar, Dist. Dhar.

Work of Fabrication, Erection AND Replacement of worn out/ damaged eroded Grills of Wagon Tippler Hoppers of CHP-IV, STPS, Sarni.

FABRICATION AND INSTALLATION WORK OF 10 NOS. GI MAKE WATER TANKERS SUPPLIED AT THE MUNICIPAL CORPORATION REWA ON 04 WHEEL CHASSIS.

Work contract for fabrication of chain cover of Rotary Breakers for CHP, PH-I and PH-II, of SSTPP, MPPGCL, Dongalia

Fabrication of 10 nos. Foot rest as a float for BH205E 190T and HD785-7 100T dumpers at NWS, Nigahi Project

Providing, fabrication and supply of dam shutter gates size-1.50m x 4.50m- 5nos for Agni -2 barrage of WR Division, Khandwa.

Fabrication of 20 Nos. Cages of Live Ring assembly of Swing System of 24/96 Balram Dragline working at Nigahi Project.

Contractors registered under MPPKVVCL Indore for Anudan n OYT category to Execute fabrication of steel material works under OnM Circle Neemuch.

Fabrication of a 24-number Insulator Stud of the HD Generator (1045KW) and Swing Generator (506KW) of the 24 96 Dragline

Procurement of MS Round Bar of Different diameter 45 mm and 36 mm for fabrication of gates of various W.R. Divisions

Fabrication and assembly of coal mill hot primary air control damper for Boiler of 1X500 MW unit at SGTPS MPPGCL Birsinghpur

Providing, fabrication and supply of stopdam gates size-1.50m x 3.000m-5nos for Bahera Stopdam cum causeway of WR Division Shivpuri.

Providing, fabrication, supply and erection work of gate size 1.20m x 1.20m - 5nos for Kurdeegpura Barrage, WR Division, Manawar Dist. Dhar .

Providing, fabrication and supply of stopdam gates size-1.40m x 2.50m-3nos for Boriya Barrage of WR Division No.1 Dhar.

Contractors registered under MPPKVVCL Indore for Anudan n OYT category to Execute fabrication of steel material works under OnM Circle Neemuch

Providing, fabrication and supply of dam shutter gates size 1.50m x 3.00m- 5 nos for Markadhana Barrage of WR Division Betul.

Providing, fabrication, supply and erection work of gate size 1.40m x 1.40m - 4nos for Jhikribalwari Barrage, WR Division, Manawar Dist. Dhar.

Providing, fabrication, supply and erection work of gate size 1.40m x 1.40m - 5nos for Ajantaad Barrage, WR Division, Manawar Dist. Dhar.

Providing, fabrication and supply of stopdam gates size 1.50m x 3.00m-20 nos for Pipalya Saheb Barrage of WR Division Dewas.

Contractors registered under MPPKVVCL Indore for Anudan and OYT category to Execute fabrication of steel material works under OnM Circle Mandsaur

Fabrication of Estimate for Birfucation work of 33 KV Tiwarkheda Feeder under Prabhatpattan DC in O and M Dn Multai Divi.

Square and V -Threading work of M.S. Round Bar 63 / 56 mm dia for fabrication of gates for various W.R. Divisions

Providing,fabrication and supply of stopdam gates size 1.50m x 3.00m- 5 nos for Chaina stopdam, WR Division Jaura, Dist. Morena.

Fabrication of 50 nos covers for transmission and torque converter assemblies of different models from outside agency at bidders workshop facility

Custom Bid for Services - PROVIDING SERVICES FOR DESIGNING FABRICATION AND SUPPLY OF BRIDGE CRANE WHEELS AT BPCL BINA REFINERY MADHYA PRADESH

FABRICATION OF PIT LINER AS PER DRG. NO. - 02020722602 REV. 00 ASSY. OF ITEM NO. 03 TO 39 VAR. 00 & VA

Custom Bid for Services - Works Contract for Local Stress Relieving in Fabrication department on Job basis Similar Category Advertisement Service - Magazine

Custom Bid for Services - Works contract for Fabrication of Large Hydro Turbines Various Assemblies as per docketjob card for various projects

Execution and supply of AT Welding portions of 60 Kg. 90-UTS/R-260 rails with single shot crucible under Sr.DEN/N/Bhopal Section.

Repair Of Road Sign Boards ,Km Stone ,Point Stone , Road Marking I/C Welding Painting And Figuring Etc Complete At Different Places Of Road.

Procurement of Hard facing welding electrode for coal mills installed in boiler of 2x660 MW PH- II, SSTPP, Dongalia on limited offer make basis

Procurement of EWAC make special purpose welding electrodes EWAC EHDP 30 4.0 mm for coal nozzle tip in boiler of 210MW ATPS MPPGCL Chachai.

Execution and supply of AT Welding portions of 60 Kg. 90-UTS/R-260 rails with single shot crucible under Sr.DEN/N/Bhopal Section.

Supply, Testing and Commissioning of Welding Busbar Facility at Sick Line and Examination Line No. 4 & 5, Wagon Repair Depot, Down Yard, Ratlam Division.

Regarding The Purchase Of Iron Material Required For The Welding Branch In The Workshop Department Of Municipal Corporation, Ratlam. (Attached - As per The Conditions)

Procurement of Hard facing welding electrode (L and T Ewac XHD Abratec N-6710 ) for coal mills installed at 2x660 MW , SSTPP, MPPGCL, Dongalia

WELDING GENERATOR DG SET POWER-3kW. RATED VOLTAGE-AC 220 V (as per specification) MAKE-SD/VOLVO PANTA/PARKINS/EQUIVALENT Accepted Make Brand : MMF

WELDING ELECTRODES CLASS C1 TO SPECIFICATION IRSM 28/12 OF SIZE 3.15 x 350mm. As above. Make Brand: D&H SECHERON, MOLYTHERME(SPL),3.15X350MM

PORTABLE SINGLE PHASE WELDING MACHINE, IGBT INVERTER TYPE, 200 AMPS OUTPUT CURRENT RANGE. MAKE: ESAB/ADOR/L&T/MILLER ONLY MAke: ESAB HANDY ARC

Custom Bid for Services - Tube to Tube sheet welding production qualification mock up blocks preparation and testing Similar Category Manpower Outsourcing Services - Minimum wage

Custom Bid for Services - Works contract for spot and projection welding of spacers plate end & vent punching Similar Category Manpower Outsourcing Services - Minimum wage

Custom Bid for Services - Complete Welding and Dressing Job Work of TD2C51 Wheelchair (as per ALIMCO drg) Similar Category Manpower Outsourcing Services - Minimum wage

Custom Bid for Services - Complete Welding and Dressing Job Work of Tricycle TD2C38 AS PER ALIMCO DRG Similar Category Manpower Outsourcing Services - Minimum wage

Extension of Dump body by 600 mm of 03 nos. 100T Dumpers at Block-B Project by fabrication for increasing coal haulage

Fabrication of 144 nos compensating bars of H/D motor (1300 HP /GE MAKE) of 24/96 Dragline at bidder workshop/facility

Providing, fabrication, supply and erection work of gate size 1.40m x 1.40m - 3nos for Nayapada Barrage, WR Division No. 01, Dist. Dhar.

Repairing and Fabrication of Latch Keeper of Bucket Assembly of 20 CuM WK 20 TYHI Shovels (Maruti and Mahaveer) at Nigahi Project.

Supply of 01 Nos.9 Meter Hydraulic Sky Lift Vehicle with Chassis and Fabrication of Tata Intra V30 or Similar Vehicle make

Machining works of different types of pumps coupling and fabrication of flange for suction and delivery for EnM field at Nigahi Project.