Fabrication Tenders in Telangana

Piping and Structural Fabrication works including replacement of damaged Fire Water Headers in Utility 1 Area at Main Plant of HWPM

AA7750202013-WELDING CABLE 50SQMM CU 400-450 AMPS( as per BHEL Specification) (Q3), AA7750202021- WELDING CABLE 70SQMM CU 550-600 AMPS (as per BHEL specification) (Q3)

Fabrication and Supply of Aluminium Hollow Shafts assembly as per BHEL Drawing

PROGRAMMABLE TIG WELDING MACHINE WITH WELD CURRENT RANGE: 3A-500A, SPECIFICATION AS PER ANNEXURE

BFS PCB FABRICATION (R108.15. 0500-00) DETAILS AS PER THE ANNEXURE-1, MOTHER BOARD PCB FABRICATION (R108.15. 1100-00) DETAILS AS PER THE ANNEXURE-1, MOTHER BOARD PCB FABRICATION (R108.35. 0200-00) DETAILS AS PER THE ANNEXURE-1, MOTHER BOARD PCB ... PCB FABRICATION (R108.30. ...

Fabrication of milling vessel for the existing attritor milling unit

FABRICATION OF ASSORTED FIXTURES FOR GROUND TESTING OF NAVIGATION SENSORS

fabrication of High pressure Air booster motor for B-05

DEVELOPMENT AND FABRICATION OF ANGLED TAPE WOUND @15DEG COMPOSITE LINER

Procurement of Fabrication of RPF Antenna Layer as per specifications

Fabrication and Supply of Accessories for Testing of CK310 INS

Fabrication of Veh mounted ver of ABAMES as Trg Aggregates

FABRICATION OF MIDHANI STALL AT DEFEXPO-2022 AT GANDHINAGAR, GUJARAT

Fabrication and Reconditioning of 6000T Non rotation top die assembly.

FABRICATION AND SUPPLY OF BASE SHROUD AND TVC ASSEMBLY COMPONENTS

Fabrication and SR of Rear Bearing Housing along with Cover

Fabrication and Bullet Proofing of Toyota Fortuner with VRDE Testing.

Fabrication,Assembly and Testing of 4 Nm EMA Section VI

FABRICATION TESTING AND SUPPLY OF ASTRA OBC WITH LIMITED TELEMETRY

FABRICATION TESTING AND SUPPLY OF POWER PC BASED FCS UNITS

DESIGN, FABRICATION AND SUPPLY OF FULL ARTICLE AIR TRANSPORTATION CONTAINER

Materials for Fabrication of 2 Axis Pedestal Interface Structure (Q3)

FABRICATION AND SUPPLY OF 5KW FRAMELESS HALBACH BLDC MOTOR (Q3)

Design Fabrication and Supply of Leveling system (EM Jack) (Q3)

Fabrication and supply of Bare 32U Racks with integrated PDB

Fabrication of Tubular/Skeleton Models of Tank T-72 (Q3)

Design and fabrication of MEMS based Borehole Trajectory Logging System

FABRICATION OF EME CREST & ANCY FOR EAGLE CHOWK AT MCEME

Fabrication and Supply of Embedded Fine Point Tracking Module (Q3)

Fabrication of lighting towers at OCP-I RG-III Area

Fabrication repairs of Komatsu Dozer Blades working at OCP3, RG2

Fabrication. supply and installation of HVAC galvanized iron sheet ducting

Civil fabrication and false ceiling work for medical room at

FABRICATION OF TIS COGS FOR UG MINES OF MANDAMARRI AREA.

Fabrication of W-Straps for all Mines of SRP Area

Fabrication of Cloth bank at Bathukamma ghat of Sircilla town

Fabrication of Sanitation Tractor raising of bodies under General Fund.

Fabrication of W-Straps for all Mines of SRP Area.

Fabrication of W-Straps for all Mines of SRP Area.

DESIGN,FABRICATION, SUPPLY, INSTALLATION AND COMMISSIONING OF SUBSONIC WIND TUNNEL

FABRICATION, ERECTION AND COMMISSIONING OF UTILITY PIPELINES FOR SPRING PROJECT

FABRICATION AND SUPPLY OF FOLDED FIN ASSEMBLY (CW AND CCW)

Design AND Fabrication of PCBs for strapped down imaging seekers

Fabrication & Supply of Miscellaneous Mechanical items as per Annexure-F

Revamping of Lighting JBs, Welding receptacles, earthing system in EBP at HWPM including supply of spares.

Vacuum gate valve for Electron Beam Welding Unit-IV as per annexure

Design Supply Installation testing commissioning of 500 AMPS MIG/MAG Welding Machine

IGBT DIGITAL MICRO PROCESSOR CONTROLLER BASED HIGH FREQUENCY INVERTER TECHNOLOGY WELDING MACHINE

Tungsten Inert Gas (TIG) Welding Equipment as per IS 9604:1994 (Q2)

Blow Pipe for Welding and Cutting as per IS 7653 (V2) (Q3)