Fabrication Tenders in Telangana

INJECTOR NOZZLE, PLYWOOD FOR GEN, LEATHER CLOTH BLOCK, ROD WELDING, STEEL ANGLE

HEAD, PART NO: 4635 FOR BERNARD EZ 600 AMP MIG WELDING TORCH.

KTPS-V-TM-Online arresting of various gland leaks, steam/feed water leaks from various valve flanges and welding joints in pipe lines while unit is in-service pertaining to Unit-9 and 10 Turbine Maintenance of KTPS-V stage (2X250MW) during the FY 2025-2026

KTPS VI Stage BM Repair works of Boiler First Pass Water Wall Tubes duly replacing eroded portions with spool piece bends as per IBR welding procedure in Unit XI Boiler of KTPS VI stage of 1X500MW during the Annual Overhaul period for the year 2025-26

Remodelling of RCC 600mm dia NP3 Class Pipe Drain and CC restoration from H.No 4-10-68/1, 4-10-63/5 to 4-10-62/2/1 (welding shop) at Quyum Nagar in Ward No.61-Attapur Division in Rajendranagar Circle-11 GHMC (Rs.8.60 Lakhs)

LP HP welding works for attending leaks and replacement of damaged valves, bends and pipes etc, in Steam,Feed water, Condensate, Chemical lines and Laying of new piping for site conditions in Units-III IV during Annual Overhaul, Shutdowns/Preventive Maintenance for the year 2025-26

Construction of CC Drain from 7-3-35 to 7-3-19 (Both sides) and from 7-6-1 to 7-6-22 (Both sides) and from Krishna Welding Shop to Existing Drain and from Auto Raju to Shaker House in Ward No.21 (5 Call)

LP & HP welding works for attending leaks and replacement of damaged valves, bends and pipes etc, in Steam, Feed water, Condensate, Chemical lines and Laying of new piping for site conditions in Units-III & IV during Annual Overhaul, Shutdowns/Preventive Maintenance for the year 2024-25

Supply, testing and commissioning of 400A, 3-phase IGBT inverter controlled MIG welding plant as per enclosed technical specification. MAKE/BRAND: MIG 400/ CCCV of M/s ESAB INDIA LTD or make KEMPPI to model No. FastMig x 450 or Technocrats plasma systems pvt ltd. its equivalent.

Month 1, Month 2, Month 3, Month 4, Month 5, Month 6, Month 7, Month 8

Services of LT cabling and termination of balance 3 phase weldingreceptacles in BTG areas at NTPC Telangana St-I

Design, Fabrication and Supply of MCC Panel. Details as per annexure

DESIGN, FABRICATION AND SUPPLY OF DIGITAL METERS FOR GAMMA COUNTING (Q3)

Fabrication and Machining of HP1103, Journal Skirt Assy, NTPC Lara project

F9AZS00053- Fabrication Bearing Box MDG455 436 406 405 366 346_MLC450 400

Design, Fabrication, Supply and Installation of laboratory batch leach system (Q3)

Design, fabrication, inspection, testing, delivery, erection, commissioning of autoclave vessel (Q3)

Procurement, Fabrication, supply installation, erection and commissioning of Air plasma torch

COMPONENTS FOR 259 EXCITERS (Q3), FABRICATION ITEMS FOR 257 EXCITERS (Q3)

Design, fabrication, supply, installation, testing and commissioning of INCOIS logo signage

SHEET CELLULAR, PLAYWOOD FOR GEN, LEATHER CLOTH BLOCK, ROD WELDING, SWITCH ENGINE STARTER

DESIGN, MANUFACTURING, INSTALLATION AND COMMISSIONING OF ROBOTIC TIG WELDING AS PER SPECIFICATIONS N

9P5601025 CHECK PIECE, 9P5603012 STRIP FOR WELDING, 9P5606012 KEY FOR HT, 9P56CT40305 GLAND

Supply, installation & commissioning of Inverter controlled 350 Amps. AC/DC Pulse TIG welding

HEAD, PART NO: 4635 FOR BERNARD EZ 600 AMP MIG WELDING TORCH. (Q3)

ECG Machine, Welding cable 35 sqmm in mtrs, DVR, Ascenders, Pencil in pkts

SUPPLY AND FABRICATION, ERECTION AND COMMISSIONING OF REPLACE THE EXIXTING PURE OIL TANK OF 30M3 CAPACITY WITH NEW PURE OIL TANK OF 30M3 CAPACITY WITH 1.5 METER AND 1.5 METER ABOVE THE CONE SS CLADDING FOR OUR OIL PALM PROCESSING PLANT AT ASHWARAOPET, BHADRADRI KOTHAGUDEM

Manufacturing, fabrication, supply and delivery of M S barrels (Gap specials) 1.50 mts length of 1450mm dia OD to suit 1500 mm dia PSC Pipe of MWSS Phase-II transmission pumping main from Kalabgoor to Patancheru under Sub-division No.I, O&M Division No.VIII, Patancheru.

O & M,Estimate for Supply,fabrication and Erection of EM Parts,Gates of OT Sluice Shutter for RD-13,14,15,20,22,24,25,27,28 & LD-3,5 Distributory canals on LFMC and LD-5,6 &7 Distributory canals on RFMC of Taliperu Project at Pedamidisileru(v),Cherla(m),Bhadradri Kothagudem(Dist.)

Supply, delivery and fixing of MS chamber covers for inline booster in place of completely damaged cover by engaging of crane truck, fabrication team etc., at various locations in Karwan Constituency under Electrical and Mechanical Section, EAM Cell-VI of O and M Division No.III

Manufactruing,Fabrication,Supply and Delivery of 1450mm dia OD MS barrels (Gap Specials) for inserting in to 1500mm dia burst PSC Pipe on MWSS Phase-II, 1500mm dia Transimission Pumping Main from Patancheru to Hydernagar under pipeline Section,SD-III,O&M Division No.VIII,Patancheru

Fabrication, supply, erection, testing & commissioning of vertical lift service gate of size 4.120 m x 7.970 m and dismantling, re-erection of existing rope drum hoist for service gates in vet 1, 2 & 3 for Left Canal Head Regulator of Nagarjuna Sagar Project, Nalgonda District.

Dismantling and Erection of Metalic Expansion Joints 1.RCEJ 4/5000X3100X561 2.RCEJ 4 4100X3700X561 3.RCEJ 1-HALF size 3874X5574X81MM and 4.RCEJ 1 7000x4000x186 along with protection plate and welding of corner piece of Expansion joint RCEJ 2-3058X3358X272MM in unit-IX in the annual overhaul period.

Patch Welding to be done for Rectification of Damaged Flue Gas Duct from APH A hopper to chimeny along the path AB side flue gas duct and its honeycomb structure ( A and B) after dismantling the damaged worn out portion of Flue gas Ducts for overhaul of unit IX

Patch Welding to be done for Rectification of Damaged Flue Gas Duct from APH B hopper to chimeny along the path CD side flue gas duct and its honeycomb structure C and D after dismantling the damaged worn out portion of Flue gas Ducts for overhaul of unit IX

KTPS-VI Stage -BM- Repair Works of Economizer Zone duly replacing the damaged portions with spool piece/bends as per IBR welding procedure in Unit XI Boiler of KTPS VI Stage(1x500MW) as per field requirement in Unit-XI during Annual Overhaul period for the year 2025-26

Manual Metal Arc Welding Electrodes Size 4.00 x 450mm, Class A2, Type of Coating:Medium conforming to IRS M:28/2020, Code ER4211X as per IS:814/2004 (R 2016) Shelf life: 12months from the date of receipt in stores or 18months from the date of manufacture whichever is more.

DISPOSABLE EAR PLUG, SAFETY HOOD, WELDING OXYACETYLENE GOGGLE, FIRST AID KIT, OVER SPECTACLES, SAFETY SPECTACLES, ANTI FOG PROTECTION GLASS, REUSABLE RESPIRATOR WITH DOUBLE FILTER, WELDING MASK WITH EXHALATION VALVE, CARTRIDGE PAIR FOR RESPIRATOR

DESIGN, FABRICATION, TESTING, ERECTION & COMMISSIONING OF AUTOMATIC MITRE BAND SAW CUTTING MACHINE

Design, fabrication and assembling of High Voltage PCBs for radiometric logging system

Fabrication and Machining of HP1103, Spring Stud Extension Cap with Painting schedules

PROCUREMENT OF RAW MATERIAL, CHEMICAL AND MECHNICAL TESTING, FABRICATION, SAND BLASTING (Q3)

DESIGN, FABRICATION AND SUPPLY OF HIGH VACUUM GATE VALVE FOR HVAF (Q3)

FABRICATION AND MACHINING OF PIPE SLEEVES LONG AND SHOT TOTAL 80 NOS

Supply, Installation and Comm. of Virtual Reality Welding Simulator for NTPC Telangana Stage-II

DESIGN, SUPPLY, FABRICATION, ERECTION AND COMMISSIONING OF DOUBLE PRESSING FOR EMPTY FRUIT BUNCHES EFB WITH 3NOS OF YKL MAKE IMPORTED EFB PRESS MODEL NO:777-8 AND ITS FEEDING AND DISCHARGE CONVEYORS,ELECTRICAL PANEL AND ITS ACCESSORIES AT OIL PALM PROCESSING PLANT,APPARAOPET,BHADRADRI KOTHAGUDEM DIST.TELANGANA STATE

Fabrication ,supply and erection of vertical gates duly removing old gates, screw rods and hoist gear boxes and refixing of allied parts of Ghanpur anicut head regulators and scour sluices, and laying of ring bunds at both sluices of Chinna Ghanpur (V) kulcharm(M), Medak (dist)

DESIGN, FABRICATION, SUPPLY AND CONSTRUCTION OF PRE-ENGINEERED BUILDINDS BARRACKS 2NOs, DINING HALL 1 NO, RECREATION HALL 1 NO, STAFF ROOM 1NO, OUT DOOR ARTICLE STORE 1 NO, CLASS ROOM 1NO, COMPUTER LAB 1NO & BELL OF ARMS 1 NO AT DTC SAR CPL AMBERPET OF HYDERABD DISTRICT.

Supply, Fabrication and Erection of Barbed Wire Fencing with MS Angles along the boundary of HMDA land of Ext.Ac.150.00 gts in survey no 96 of Mokila(V), Shankarpally (M), Rangareddy District(Reserved for Scheduled Caste contractors as per GO.MS. No. 59 I & CAD (Reforms), dt.21.05.2018.

Solid MIG/MAG Welding Filler wire 1.2mm dia., Class IV to IRS: M 46/20, Grade: ER80S - G,AWS: A5.28/A5.28M:2020 & STR No. MC/STR/W/02 Rev.-3.0 Shelf life: 9 months from the date of receipt in stores or 12months from the date of manufacture whichever is more.