Fabrication Tenders in Uttar Pradesh

EVR, ELECT WELDING RODS, BEEDING, MS SHEET, PLYWOOD FOR COMMON 180x120x66 MM

COTTON HAND GLOVES, KEVLAR HAND GLOVES, PLASTIC FACE SHIELD, GAS WELDING GOGGLES

Unbranded "As per specification for ""Air arc gouging electrode "",, Unbranded "As per specification for ""Air arc gouging electrode "", with standard C4117 BEML Welding Electrode prepared and approved by BEML LTD, OFFICE OF THE ASSISTANT GENERAL MANAGER, CORPORTAE MATERIAL 'BEML SOUDHA', 231/1 ,4TH MAIN ROA 8 millimeter

INDIDESK "As per specification for ""Air arc gouging electrode "",, INDIDESK "As per specification for ""Air arc gouging electrode "", with standard C4117 BEML Welding Electrode prepared and approved by BEML LTD, OFFICE OF THE ASSISTANT GENERAL MANAGER, CORPORTAE MATERIAL 'BEML SOUDHA', 231/1 ,4TH MAIN ROAD 6 millimeter

INDIDESK "As per specification for ""Air arc gouging electrode "",, INDIDESK "As per specification for ""Air arc gouging electrode "", with standard C4117 BEML Welding Electrode prepared and approved by BEML LTD, OFFICE OF THE ASSISTANT GENERAL MANAGER, CORPORTAE MATERIAL 'BEML SOUDHA', 231/1 ,4TH MAIN ROAD 8 millimeter

INDIDESK "As per specification for ""Air arc gouging electrode "",, INDIDESK "As per specification for ""Air arc gouging electrode "", with standard C4117 BEML Welding Electrode prepared and approved by BEML LTD, OFFICE OF THE ASSISTANT GENERAL MANAGER, CORPORTAE MATERIAL 'BEML SOUDHA', 231/1 ,4TH MAIN ROAD 6 millimeter

For the Work of Maintenance of 33/11 KV and LT Line (Including Replacement of Pole, Welding of Pole, Re-strengthening of Pole, Guarding and Tree Chopping etc.) 33/11 KV Begumpul, 33/11 KV Sadar in the Area of EUDSD-III Under EUDD-II, Meerut.

Repairing, welding, grinding and reconditioning of worn-out 2 nos. propel 2 nd intermediate pinion shaft of propel gear box assembly, 2 nos. swing 1st pinion shaft, 2 nos. gear wheel of swing 1st pinion shaft and 2 nos. gear wheel of swing 2 nd pini

Supply & stacking of 60kg/60 EI R260 grade Rails AT welding portions using Compressed Air Petrol pre- heating system, with prefabricated three-piece moulds (Zircon washed) manually pressed using Single shot crucible fitted with Automatic Tapping Thimble (ATT) technology at SSE (P. Way) Store/Agra Depot

Rusted AND Broken STP pole Joist poles and make them straight by welding the iron angle and making pole plinth with the help of cement, coarse sand and stone grit in the area of 33 11 KV S s Atrauli AND Malhera under EDD Sandila, Hardoi.

Reconditioning of CMS crossing by using Technology of Translamatic Robotic welding and Reconditioning of wornout 52 kg/60 kg switch rail using electrodes approved by RDSO IRS H-3-C class as per standards prescribed by RDSO as a complete job at identified location over Moradabad Division.

Rusted AND Broken STP pole Joist poles and make them straight by welding the iron angle and making pole plinth with the help of cement, coarse sand and stone grit in the area of 33 11 KV S s Balamau AND Kachauna under EDD Sandila, Hardoi.

For the Work of Maintenance of 33/11 KV and LT Line (Including Replacement of Pole, Welding of Pole, Re-strengthening of Pole, Guarding and Tree Chopping etc.) 33/11 KV RTO, 33/11 KV Khadauli in the Area of EUDSD-III Under EUDD-II, Meerut.

"SOLID MIG/MAG WELDING FILLER WIRE, CLASS VII 1.2 MM (SPEC. NO.-IRS M 46/13 WITH AMENDMENT NO.1, GRADE ER 309L AS PER AWS: A 5.9-10 IN SPOOL OF 12.5 KGS/ROLL (SPEC. NO. IRS M-46/13 AS PER AWS: A5.9-10

Push Pull Rod for WAG9/WAP-7 Loco.CLW Drg No: 1209-01-113-006 Alt. 5 consisting of (1) Flange as per CLW's Drg No: 1209-01-113-007 Alt 7 (2) Tube welding as per CLW Drg No: 1209-01-313-008 Alt 5. Spec

Maintenance Repair, Welding and Replacement of Damaged Poles and ACR/ABC of HT/LT Line for Attending Breakdown of 02 No. 33 KV Line and 07 No. 11 KV Feeder Rural Area in the area of EUDD-VII GZB under the jurisdiction of SE EUDC-III Ghaziabad

Frame or Chassis, Motor Electronic Speed Controller, Propeller, Flight Controller, Battery, Battery Charger, GPS, Camera With Gimbal, LiDAR Sensor, Transmitter and Receiver, Servo Motor 35 Kg, UBEC 12 S, Power Distribution Board, Ruggedised Container

U07A-100300, U01A-090000B, 95201A-000000A00F, U03A070000A07, U09A-100000, U03A-280000, U06A- 100000, MISC-5279, U07A-100200, U08A-320000A, U03A-100000

Refer to enclosed tender document.

WORK MENTIONED IN BOQ

AS PER NIT

Fabricationofstoresplatformandladdersatsitedtpshtps As per scope of work

OK

Supply of AmmoniumChloride in bags at Electy Fabrication Unit Naini, Prayagraj

Painting of pale fencing shutters at Electy. Fabrication Unit, Naini, Prayagraj.

Foundation and allied work for Hydraulic Shearing Machine in fabrication shop

Repairing of Acid Storage tank in Electy. Fabrication Unit, Naini, Prayagraj

Supply of Fabrication for NR Building at Thana Rasulpur Distt. Firozabad

Steel Girder (Procurement, Fabrication, Erection, Launching on pier caps Complete Job

Work related to welding of damage polo under Electricity Urban Distribution Division - Bulandshahr.

VETRA 50GRAM FLEX GLUE, BINDING WIRE, GP COIL SHEET, SQUARE PIPE, WELDING ROD

Brush Swab without Holder, Brush Cleaning Chamber, Light Stand, Iron Pipe, Welding Rod

Repairing and welding of broken/Rusted STP in area of EDD-II Hapur

FLY TENT, WELDING ROD, TARGET PAPER FIG 11, TALIC SHEET 20MM, COMBAT CLOTH

WELD WHEEL SHAFT, DRG. NO./SPECIFICATION 2-24889 (FOR SEAM WELDING MACHINE) . (Q3)

IRON POLE, IRON SHEET, GREEN SHEET, ANGLE CLAMPS, NUT BOLT, WELDING ROD, SCREW

CUTTING BLADE, MS SHEET, ELECT WELDING ROD, PLYWOOD, RUST SPRAY, QUICK FIX ARALDITE

POLE WELDING OF DAMAGED ST POLES IN THE AREA OF EUDD-4 ALIGARH

RCC NALA NIRMAN KARYA RAHEES WELDING SE SAIFAN SE PILIBHIT ROAD WARD NO2

Annual breakdown / running maintenance of L.P. Valve, fabrication of bend, O/H of special H.P. valve and attending leakage from flange bonnet of H.P. valve/Pipe line and etc. work of unit no. 9, 10 , 11, 12 and 13 of 5X200 MW, BTPS, Obra

Fabrication of M S Gantry Girder with structural steel SAIL fabricated by ISMB of size 12480 1200 600 mm and 13080 1200 600 mm as per drawing and site condition for Stop log gate Bay No 01 to 04 of Bhaurat Dam Lalitpur Lot 01

The repairing work of different spares of Conv. Pulleys, repairing/ machining of Crusher Rotor Shaft and fabrication/machining and heat treatment of I/P shaft and matching bevel gear of boom Conveyor and bucket gear box of Old/New S/R of CHP, BTPS, O

Fabrication and Erection of 450 mm Dia 6mm thick M.S. Pipe Confirming to IS 3589 2001 4.5 mtr. Long and both end welded with new M.S. Flange and Painting complete in all respects. at Manikpur Bhujana Pump Canal as directed by Engineer in Charge

repairing of old/worn out 60 Nos. rollers and fabrication of 10 Nos. roller sector cages 10 Nos. inner and 10 Nos. outer pertaining to live ring assembly and 1891588 repairing of 24 nos. Roller rails of 24/96 draglines, working at Bina Project

Fabrication and Fitting of Feed Sump of Clinker Grinders M.S. bends for eco hopper lines overhauling of Flushing Apparatus of Eco APH Duct Hoppers and repairing of roof of Buffer Hoppers of Unit No. 8 and 9 during overhauling of Unit No.8 and 9

Custom Bid for Services - Fabrication and erection of platforms at elevation 4 8 12 16 meter at CT Tower and 6 meter elevation at bottom ash hopper of Unit 3 and 4 210 BTPS Parichha Jhansi Similar Category Operation and Maintenance Power House/Power Plant

CUTARC "As per specification for ""Air arc gouging electrode "", with, CUTARC "As per specification for ""Air arc gouging electrode "", with standard C4117 BEML Welding Electrode prepared and approved by BEML LTD, OFFICE OF THE ASSISTANT GENERAL MANAGER, CORPORTAE MATERIAL 'BEML SOUDHA', 231/1 ,4TH MAIN ROAD,S 8 millimeter

Balance work of Supply & stacking of 60Kg/ 60EI-R260 grade rails AT Welding portions using Compressed Air Pertol perheating system, with prefabricated three piece moulds (Zircon washed) manual pressed using Single shot crucible fitted with Automatic Tapping Thimble (ATT) technology at SSE(P.way)/Agra Depot in Agra division

Maintenance Repair Welding and Replacement of Damaged Poles and ACR and ABC of HT and LT Line for Attending Breakdown of 02 No. 33 KV Line and 07 No. 11 KV Feeder Rural Area in the area of EUDD-VII GZB under the jurisdiction of SE EUDC-III Ghaziabad

Work of dismantling fabrication erection of Parnala drain trenche of ESP roof and fabrication of dust dumping arrangement and other miscellaneous works in Ash Handling Division 2x210MW BTPS Parichha