Fabrication Tenders in West Bengal

Seeking Approval for Transportation, Installation, Commissioning, Necessary Fabrication and Trial run including Civil work of one 1200 mm width 2x150KW, 6.6KV PVC Belt Conveyor for a length of 90 mtr. from -2BL/-1D to -2EL/-1D CM Panel-5 along with e

Fabrication, transportation, installation, commissioning, and trial run of one 1000mm width, 1x90kW, 550V, single drive head in the 65L belt conveyor at 20XD 65L for strengthening the belt conveyor in the RVII seam of the LHCM2 section at 3 and 4 Inc

Transportation, installation with necessary fabrication of one no. 300 mtr. head turbine pump-motor-base frame set including civil jobs, placing of starter-cable N fitting of pipeline at 75L/-14D of R-VIIA seam at 3N4 Incline Unit, Jhanjra Project Co

Fabrication galvanizing testing supply delivery including fasteners at site for the work of 220 KV structure for Subhasgram 220 KV Sub station, under Kasba Area Office, and 132 KV structure for Newtown AA 1 132 KV Sub-station, under Salt Lake Ar

Extension of link belt by 68 m with shifting of discharge unit, fabrication, erection of vertical columns,cantilever beam, both side 68 m trusses,walkway, fitting of structures with belting with civil work and trial run at surface of MIC,Jhanjra Area

Transportation Installation Necessary Fabrication Commissioning and Trial Run including civil works of one 1200mm, 2 X 150KW,6.6 KV PVC Belt Conveyor, length 128 mtr from -12R/-30L to -12R/-34L of Panel 22 in RVI Seam of MIC, Jhanjra Project Colliery

Installation of One no 900GPM, 90M head turbine pump at 5D between 19L and 20L after transporting from surface, Installation of one no 500mtr long(approx) 6 in pipeline and make necessary fabrication for matching this line to pump and existing delive

Fabrication, galvanizing, testing, supply delivery at site of different Structures including fasteners of 2 Nos. Lightning mast 35 mtr at Newtown AA-I 132 KV Sub station and 220 KV 33 KV equipment structure at Newtown AA-III 220 KV Sub station

Transportation, Install. ,Fabrication,Commissioning,Trial run including civil work, roof heightening of 1 no.1000mm width, 1X90kW 55OV Single Drive Belt Conveyor for length of 140 m from 72L/-13D to 77L/-13D in R-VIIA seam at 3n4 Incline J. P. Colly

Transportation, Installation, Commissioning and Trial run including necessary fabrication jobs (including civil works) of One no 1200 mm width Dual Drive (150 kW X 2) PVC Belt Conveyor for a length of 1000 meters. along 13L in RVI seam of MIC, JPC

Fabrication and providing of four wheel trolley for mounting of 110 KVA BFL DG set of BOP Renu which is dismantled and kept at BOP Kanapara of 35 BN BSF including mounting and installation of 110 KVA silent type DG set on trolley

Miscellaneous Civil Construction works, Structural Fabrication and Erection works and allied jobs for various Process schemes at Haldia Refinery (HR). Part-A DHDS, OHCU, FOB, ETP areas of HR. Part-B LOB, TPS, GT, BS-VI, DYIP and other areas of HR.

Transportation, installation, commissioning, necessary fabrication and trial run including Civil work of one 1200 mm width 2X150kW, 6.6kV PVC belt conveyor for a length of 420M from 3D/-4BL to 3D/-4NL CM Panel- Trunk Road T5 in RV seam of MIC, JPC.

Transportation, Installation, Commissioning, Necessary Fabrication and Trial run including Civil work of two nos. of 1200 mm width 2x150KW, 6.6KV PVC Belt Conveyor phase wise for a total length of 1240 mtr. from 11XD -2L to 11XD 29L CM Panel-11 in R

Fabrication and Transportation of One 90m Head 500 GPM Pump with 90 kW Motor, Including All Valves, Bends, and Associated Electricals from Surface, and Installation at 23L/23D Dip with Required 820m 4-Inch Pipeline at R-VI Seam at MIC, JPC

Transportation, Installation, Commissioning and Trial run including necessary fabrication jobs (including civil works) of One no.1200 mm width Dual Drive (150 kW X 2) PVC Belt Conveyor for a length of 190 mtr. Along 14L in RVI seam of MIC, JPC

Repairing of winding engine drum brake and other allied fittings at Pit No. B and fabrication and fitting of 4 set of GM bushes for cross head piston cylinder at pit no. A for safe and smooth winding operations under Pandaveswar colliery, Pandaveswar

Transportation installation with necessary fabrication jobs of one 90 mtr head complete turbine pump motor set at 20XD 67L along with its 4 inch dia pipeline from 20XD 67L to 7XD sump in RVII seam at 3N4 Incline Unit Jhanjra Project Colliery

Fabrication, galvanizing, testing, supply and delivery of different 220 KV Tower structures including G.I nuts, bolts and washers matching with the above for S/C LILO of NEWTOWN AA-III-SUBHASGRAM PGCIL 220KV Tr. Line at KLC Bantala 220KV S/s Under Ko

Fabrication, manufacture and supply of 10125 mm O/R (curved) Fan shaped Switches for 1 in 12 T/Out for BG 60 Kg on PSC sleepers to RDSO Drg No. T-4219 Alt-6 (with check rails) as amended upto date com

Fabrication manufacture and supply of 10125 mm O/R (Curved) Fan Shaped Switches for 1 in 12 T/Out for BG 60 Kg on PSC sleepers to RDSO Drg No. T-4219 Alt-6 (with check rails) as amended upto date comp

Small Fabrication Items (SS) - 1 for WAG-9HC Loco / Category - Structural for ELAAU/Dankuni . Specn: CLW/ES/3/0450/I,CLW/ES/3/0153/J,CLWES/3/0134/A,CLW/ES/3/0139/G,CLW/ES/3/0453/G (set detail attached

Custom Bid for Services - Fabrication and fixing of one extra arm to existing single arm bracket of 11 m tubular GI street light pole installed along peripheral boundary at DVC RTPS Raghunathpur Similar Category Operation and Maintenance Of Electrical Systems/Electrical Installations

Custom Bid for Services - Proposal for layout fabrication erection commissioning of fire hydrant water line fire spray water line near DM plant CHP TG Boiler Coal mill Coal stacker AHP and ESP area Similar Category Customized AMC/CMC for Pre-owned Products

Custom Bid for Services - Fabrication Erection Repair and Replacement of different size Gas Pipe Line and other major jobs at Reheating Furnace of both WRM and Bar Mill during Capital Repair 2026-27 Similar Category Customized AMC/CMC for Pre-owned Products

Transportation, Installation, Commissioning, Necessary Fabrication and Trial run including Civil work of one 1000 mm width 2x150KW, 6.6KV PVC Belt Conveyor for a length of 90 mtr. from 12XR/-2L to 12XR/12L CM 3 Panel 7A along with heightening at -2BL

REPAIRING AND SERVICING OF WELDING TRANSFORMER AT VARIOUS SHOP UNDER EWS DEPARTMENT

Welding Rod, M S Angle, Seat cellular, MS Sheet, Plywood, MS Plate

INSULATION TAPE, RUST CLEANER, ELECTRIC WELDING ROD, CUTTING BLADE, STEEL MILD ANGLE

Construction of PCC road from Shib Mandir to Sanjib Singh Welding Shop.

Fuel Pipe, Hose radiator, Elct Welding Rod, plywood, Self Starter, Hydraulic Pipe

Transportation Laying Fitting Extension (at a time one pillar), 76nos 3 inch dia spray pipeline with manifold from 62L/-7D to 66L/4D after flange fitting-welding on these pipes at surface for development of panel-4 in R-VIIA seam at 3-4 Incline, JPC

Making of Bore and key slot both side for FGC 12, FGC 11, FGC 10 gear coupling (complete) by machining and making bore, key slot both side for tyre coupling presser drum of both side shaft Over size by welding and grinding motor shaft for at SSPUR

Installation 02 nos. of 1000 GPM Pump motor Set with accessories and welding of flange, shifting, laying N jointing of 6 inch dia MS Pipe including round the clock running, maintenance N repair of pump for a period of 120 Days for supply of Mine wate

Manufacturing and supply of Alumino thermic welding portions of 52Kg/60 Kg/60EI- R260 vide Estt. No. 24/Engg/AP-III of 2025-26, 28/Engg/AP-III of 2025-26, 30/Engg/AP-III of 2025-26 under the jurisdiction of Sr. DEN/III/APDJ

Push Pull Rod for WAG9/WAP-7 Loco.CLW Drg No: 1209-01-113-006 Alt.5 consisting of (1) Flange as per CLW Drg No: 1209-01-113-007 Alt.7 (2) Tube welding as per CLW"s Drg No: 1209-01-313-008 Alt 5 Confi

Push Pull Rod for WAG-9 / WAP-7 Loco. CLW Drg. No. 1209-01-113-006 Alt.- 5 consisting of (1) Flange as per CLW Drg. No. 1209-01-113-007 Alt.- 7 (2) Tube welding as per CLW Drg. No.1209-01-313-008 Alt.

PUSH PULL ROD FOR WAP5 LOCOMOTIVES AS PER CLW DRG. NO. 1209-01-113-006 ALT-5 C&D NO. B21/010 CONSISTING OF REF.-1, FLANGE DRG. NO. 1209-01-113-007 ALT-7 QTY-02 NOS. REF.-2, TUBE WELDING 1209-1-313-008

Custom Bid for Services - On train welding repairing work of unloadable BOXN wagon at various coal loading siding ie Shankarpur Ukhara Tapsi Sonachara PFPD Hazratpur JK Nagar Pandabeshwar or any other siding under Andal area of Asansol Division for a.. Similar Category Repair and Overhauling Service

Custom Bid for Services - Assistance for making of LHB side frames both LH RH Qty 720 sets at stage 1 2 with root running and making of Brake Beam Assembly Qty 720 sets with complete welding as per drawing and instruction for making on an averag..

Fabrication, Assembly and Testing of Hydraulic Naval Equipment for Fabrication, Assembly and Testing of Telescopic Hanger on Turnkey basis (SVL, YD- 3025-28), Total Qty-04 Nos

PLY WOOD 240X120X19MM, STARTING MECHANISUM, LT WIRE, WELDING CUTTING ROD, FEVICOL, LEATHER CLOTH, CABLE ELECTRIC TWIN CONE, FOAM SHEET HIGH DENSITY 2MM, SHEET CELLULAR 11X6X3, ELECTRICAL WELDING ST MILD GP 3.1

Installation of 5 (five) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply Delivery of approve

Installation of 7 (Seven) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply and Delivery etc.

Installation of 02 (Two) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply Delivery of approve

Installation of 10 (Ten) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply Delivery of approve

Installation of 02 (Two) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply Delivery of approve

Installation of 5 (five) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply Delivery of approve

Installation of 10 (Ten) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply Delivery of approve

Installation of 5 (five) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply Delivery of approve