Fabrication Tenders in West Bengal

Installation of 03 (Three) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply

Installation of 5 (five) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply

Installation of 04 (Four) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply

Installation of 03 (Three) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply

Installation of 5 (five) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply

Installation of 02 (Two) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply

Installation of 02 (Two) nos. 1.00 H.P. capacity Solar Photovoltaic Submersible Pump set in pre-existing / new bore Tube well along with 1200 Watt peak capacity Solar photovoltaic array panels on steel structure including Supply

Installation of 2 Nos. Submersible pump within 72 mm dia and 80 m depth PVC pipe ...(i) Ukilpattyinfront of Manasa Mandir (ii) Nayekpara near Kola Factory (iii) PVC Storage tank and necessary pipe , fittings over MS Structure stand at H/O Saraswati

Electricity (Fabrication of lights and wiring in Office premises)

Circuit Design, Schematic Entry, multilayer PCB Design PCB fabrication

Modification and Fabrication of 3000 Ltr. Water Storage Tank

Fabrication and Internal Wiring of Twin Hull Barge for Machinan State own and operated Major RLI, Block- Kolaghat, Mouza- Machinan, J.L.- 269, Plot- 26,Lat/Long- 22.509607 N/ 87.867047 E under Tamluk(A-M) Sub-Division under Tamluk(A-M) Division

Supply ,Installation and fabrication of 5 Nos 50 cum./Hr capacity pressure type Iron Elemination Plant which consist of one filter chamber ( dia- 3 m,height -1.5 mtr ) and one oxidation chamber ( dia -1.00 m height -1.2 m) each and Construction

Fabrication of GM bush (02 hubs) and misc jobs of 50hp Carron make haulage and repairing of big end LH side and link motion shaft of 14inch x 28inch capacity Hibbs and Hogg make steam winder of Porascole West Colliery

Misc electrical jobs of E and M Dept such as dismantling, repairing and installation of GOS,HT OHL b/d rectification,supply and fitting of lightning arresters,fabrication,erection of lighting towers and extension,erection of 440V OHL at Khottadih OCP

Fabrication of New Twin Hall Steel Barge at Sahanagar State Owned Major RLI at Mouza-Sahanagar, Block Panskura in the District of Purba Medinipur under the Executive Engineer AM, Tamluk AM Division under Core Sector Program for the FY 2025 26

Fabrication And Erection of new fire water sprinkler system and adjacent Hydrant line along with supply of materials and accessories at Cable Vault of CW P/p House,Stage -II,ECR, Cable Vault near AHP Pump House under CAPEX22-23

Transportation, installation and necessary fabrication, commissioning and trial run including extension of one no 1000mm width, 1x90kW, 550V, Single drive belt conveyor along 78L from 8D to 19D for development of panel 7 in R VII seam at 3n4 incline

Complete renov. and up gradation of Conf. Room at 1 Floor of Admin Build at ECL HQ with interior deco work like wall panelling, fabrication of furniture, acoustic false ceiling, air conditioning work by providing cassette type AC units, etc(ReTender)

FABRICATION OF NEW TWIN HALL STEEL BARGE and INTERNAL WIRING IN THE STEEL BARGE AT ELANI MAJOR RLI SCHEMES UNDER JHARGRAM BLOCK UNDER JHARGRAM-I (A-M) SUB-DIVISION UNDER MIDNAPORE (A-M) DIVISION UNDER CORE SECTOR 2021-2022 PROGRAMME

Transportation, installation, necessary fabrication commissioning n trial run including extension of one no. 1000mm width, 1x110kW, 550V, Single drive belt conveyor along 74AL from -8D to 7D for development of Trunk Panel-F1 in R-VII seam at 3n4, JPC

Installation of new drive unit 1000mm size single at TB-4 belt including fabrication of drive unit , base frame necessary civil work and installation of conveyor structure 1000mm size 86 mtr long at 39 Dip tendom belt at Millincline of Shankarpur

Transportation, Installation, necessary fabrication, commissioning trial run of 1200mm width,2 150kW,6.6kV Double drive belt conveyor for a length of 120mtr and extension for 280 mtr. in length 7 times shifting along Trunk Road-6 T-6 West Side, Sect

Transportation. installation, necessary fabrication commissioning, and trial run of one no. 800mm width, 1 x 9.7kW, 550V, single drive belt conveyor along 10D for the development of trunk heading of sector-F in R-VIIA seam at 3n4 Incline, J.P. Colly.

Transportation, installation and fabrication, commissioning and trial run including extension of one no. 1000mm width, 1x200kW,6.6 kV Single drive belt conveyor along 0XD from 30L to 41L for development of trunk panel T3 in R-VIIA seam at 3n4 inclin

FABRICATION OF NEW TWIN HALL STEEL BARGE AND NTERNAL WIRING IN THE STEEL BARGE AT PAPATPUR MAJOR RLI SCHEMES UNDER BINPUR-I BLOCK UNDER JHARGRAM-I (A-M) SUB-DIVISION UNDER MIDNAPORE (A-M) DIVISION UNDER CORE SECTOR 2021-2022 PROGRAMME.

Transportation, installation, fabrication, commissioning and trial run including extension of one no. 1000mm width, 1x90kW, 550 V Single drive belt conveyor along 80L from -11D to 0D for development of panel 9 in R-VIIA seam at 3n4 incline, jpc

Dismantling, Transportation, Installation, Commissioning N Trial run including necessary fabrication jobs including civil works of one no. 1200 mm width PVC Belt Conveyor for a length of 80 meters with complete drive head along 48 Dip from 0L to -2L

Fabrication and Internal Wiring of Twin Hull Barge for Aimabarbariya State own and operated Major RLI, Block- Patashpur-I, Mouza- Aimabarbariya, J.L.- 27, Plot- 106, Lat/Long- 22.072404 N/ 87.530760 E under Contai(A-M) Sub-Division under Tamluk(A-M)

Transportation, Installation, Commissioning Trial run including necessary fabrication jobs including civil works of One nos. 1200 mm width PVC Belt Conveyor for a length of 90 mtr. with complete drive head along 7L from 4 Dip to 2 Dip and extension

Fabrication of accidental damaged catwalk Radiator bottom Guard engg bottom cover Hand railing Auto lub mounting channel and removing of broken track guard mounting bolt and manufacturing of 2 No Track Guard and fitment of 6 No Track Guard of BE1000

Transport, install, fabrication, Commissioning and trial run including the extension of one no. 1000mm width, 1x90kW, 550V, Single drive belt conveyor along 72L from 74AL to 6D for development of panel-8 in R-VII seam at 3n4 Incline, J.P. Colly

Transportation installation commissioning trail run including necessary fabrication jobs and civil works of one 800mm width 60 meter length PVC belt conveyor with 1X75 kw 550V at -5R in between -2L and PLUS 1L at RVI Seam of MIC, JPC

Fabrication, transportation, installation, commissioning and trial run including extension of one no. 1000mm width, 1x90kW, 550 V, single drive belt conveyor along 8R from 72L to 63L in R-VII Seam of LHCM-2 section at 3N4 Incline, J.P. Colly.

Fabrication, transportation of one no. 90mtr head 500GPM pump with 90kW motor with all valves, bends and associate electricals from surface and installation of the same at 16L, 23C dip with required pipeline in R-VI seam at MIC, JPC

Assisting to Maintenance, operation and round the clock shift duty of power supplies of cyclotron and fabrication, assembly, testing of Transformers and Inductors and support to winding of different type of coils in PE MCD Section, VECC 1/AF, Bidhan

Trans, install, necessary fabrication, commissioning trial run including the extension of one no. 1000mm width, 1x110kW, 550V, Single drive belt Conveyor along 76L from -4D to 14D for development of Panel-7 in R-VII seam at 3n4 incline, J.P. Colly.

BRANDING AND FABRICATION WITH HOARDING including AUDIO SYSTEM for 04 no OF TOTOS as per specification of SUDA along with hiring of 07 no of Totos for 44 days in the month of Oct and Nov 2022 Including of All Taxes

Fabrication and Supply of: 10125 mm Over-Riding Curved Switches for 1 in 12 T/Out BG (1673 mm) for 60 Kg on PSC Sleeper to RDSO Drg. No. T-4219/ Alteration-6 with amendment and Conforming to IRS Speci

Fabrication and supply of 6400 mm overriding Derailing Switches (LH/RH) for 1 in 8.5, BG 60 Kg Rail for fan shaped layouts on PSC sleepers to RDSO Drg. No. T-6068 Alt. 5 and IRS specifications T-10-20

Fire Bucket stand made of M.S. Angle 50x50x6mm of size 6'x5'x3' with bucket hanging arrangement of 06 Nos. 18" buckets. 4 Nos for Local sand and 4 Nos. for water. Fabrication of canopy of 18 SWG MS sh

Supervision work by Ex-BHEL welding expert (person) for HP Welding and related process during Overhauling of Boiler of any Three nos. units of MTPS 1 to 6

Custom Bid for Services - BRC for Fabrication and Erection of HVAC ducts onboard ships under construction at GRSE Similar Category Piping Erection Service Repair and Overhauling Service Operation And Maintenance Of HVAC System (Heating, Ventilation And Air Conditioning System) Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2)

Skilled Labour, Semi Skilled Labour, Welding Charges, Gas Cutting charges, Nil

PROCUREMENT OF MATERIALS FOR THE REPAIRING OF WELDING MACHINES AT EWS.

NUT AND BOLT, ADEPTOR, LEATHER CLOTH BLACK, WELDING CABLE, THREAD TAPE

REPAIRING AND SERVICING OF WELDING TRANSFORMER AT VARIOUS SHOP UNDER EWS.

Remote control for MEMCO Make, Model MTW 600 A6 Welding machine

Installation of one 6inch dia MS pipe delivery line (500M) from 0D/-5L to 7D/-2L, replacing old and damaged pipeline after transportation of pipe from surface (after welding flanges in both side in surface), for the pump of 0D/-5L in underground at M

400 Amps IGBT Inverter based Manual Metal Arc Welding Machine to Model No: TORNADO 401 of Ador Fontech /any reputed firm (those who have credentials for the same item). Details are given in Annexure-A. Note: TC & GC should be provided along with material.