JCB, Crane & Earthmoving Tenders in Jharkhand

1. Stuck sprocket bolts cutting 27 nos. RH side. 2. Stuck sprocket bolts cutting 27 nos. LH side. 3. Sprocket damage holes build up and after buildup grinding all holes as actual size 27 nos. RH side. 4. Sprocket damage holes build up and

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1.Cutting the damage head portion of brace arm 2.New head making (size 18L X 6OD) by steel rod 3.Hole making in steel rod as per size 4.New making of screw (size 24L X 6.5 OD) 5.Making of thread in inner portion of steel rod for fitting of screw

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

(i) Repairing of cracked track frame and changing of under carriage and sprocket hole repairing work (ii)Repairing /welding of cracked brace arm 02 nos. and its mounting pin and repairing of RH Turnion cover its mtg. Bracket, broken bolt of turnion

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Damage blade arm broken plate cutting in side lower and upper side -12x4 2. New plate cutting, setting and welding in side lower and upper plate. 3. Pin hole oval worn out portion welding build up as per size.

Please Refer ANNEXURE B in Tender Document

1. Front damage plate cutting size-4 ft x12 ft. 2. New plate welding in place of damage plate by steel and low hyd. Electrode. 3. Front ribs new plate bending shaping and welding size-6 inch x 5 ft.

1.Cutting the damage head portion of the brace arm. 2.New head making by new materials (Steel Rod size 18L X 6OD) in steel rod, hole making, inner portion thread making for fitting of new screw and joining with brace arm. 3.New making of scr

Please Refer ANNEXURE B in Tender Document

(1) Damage blade arm broken plate cutting in side lower upper size-12x4. (2) New plate cutting setting and welding in side lower and upper plate. (3) Pin hole oval worn out portion welding buildup as per size.

1. Repairing of radiator guard. 2. Plate cutting, bending and holes making as per size. 3. Radiator guard setting alignment and welding.

1. Transmission guard damage portion straightening by gas heating. 2. Transmission guard setting welding by steel electrode.

A. Repairing and rewinding 12V self starter. 1. Armature rewinding with commutator of self starter 12V. B. Repairing and rewinding alternator 12V. 1. starter rewinding of Alternator 12V.

1. Repairing and rewinding of self startor 06 nos. 2. Repairing and rewinding of alternator 06 nos.

Repairing of cracked and bended H-Arm and 02 Nos. Links of Tata Hitachi excavator sl.no.- 194 at Tapin North OCP, Hazaribagh Area.

Hydraulic Circuit Extension Lift Cylinder Piston Scratch Welding, Machining, Repairing Proper Size.

Repair of trunion cap trunion ball and trunion end of straight arm both sides of dozer D355,sl.no. 11795 of ABOCP Block-II Area

Repairing of worn-out trunnion, bracket and its cap assly (LH and RH) of BD355 Dozer SL.No. 11834 of Kuya OCP, Bastacolla Area IX

Repairing of failed stay cylinder, both side yoke assly and parts of bonnet assembly of BD355 Dozer 11794 of Kuya OCP, Bastacolla Area IX

Repairing of LHS and RHS Blade Lift cylinders with replacement of bushings and worn out brake liners of BD 355 Dozer Sl. No. 11906

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Coal Mines; Repairing and rewiring of different offices rooms at Dozer Section; Service Provider

(a) Self and Alternator 2 Nos. 1. Armature rewinding with commutator of self startor 12V 2. Field coil new changing of self startor 12V 3. Carbon brush with brush gear assly 12V self startor

The damage structure of the all four side of the cabin straightening, rusted portion of structure cutting and new M.S. sheet changing by welding.

Custom Bid for Services - BIENNIAL RATE CONTRACT FOR ENGAGING ONE SUPERVISOR, TWO MACHINIST, TWO TURNERS, ONE FITTER CUM MARKER, ONE WELDER CUM GAS CUTTER AND ONE CRANE OPERATOR TO CARRIED OUT MACHINING WORKS (OPERATING MILLING, DRILLING, CRANE HANDL.. Similar Category Manpower Outsourcing Services - Minimum wage

Repairing of swing pinion, swing lock, Diesel tank bracket, Ladder and platform of RT 740B Crane Sl. No. 407964

Repairing of the vertical out rigger cylinder assembly of RT630 Crane SL.No. 406769 of Kuya OCP, Bastacolla Area IX

Overhauling and servicing of TG - Hall EOT crane (capacity 115 / 30 T ) of BTPS - A (1 X500 MW) Unit

Repairing of winch assy Steering cylinders and boom lift ylinders of ACE9OC crane Si. No. 1912866 of ABOCP Mine

For repairing of differential, double Pinion hub Axel bearing etc. make Escort Crane C-8000 at AWS, Sijua Area.

Repairing work towards fabrication of 01 no. float H-Arm Assembly for Tata Hitachi excavator model ZX 650H at Tapin North OCP, Hazaribagh Area

Please Refer ANNEXURE B in Tender Document

1. New making of pin size Length- 13.1/2 inch X OD 3.5/8 inch

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document