JCB, Crane & Earthmoving Tenders in Jharkhand

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Cracked portion of chassis gousing. 2. Cracked portion of chassis welding by steel electrode. 3. New plate cutting from grounded machine. 4. Plate welding by steel electrode. 5. Radiator mounting welding. 6. Cracked portion welding of K

1. Broken mounting bolt of track roller assly. taken out. 2. Rethreading of female of roller mounting it. 3. Guide holder of idler assly. developing up to required shape and size

1. The damage structure of the cabin straightening and repairing. 2. Both side of gate of operator cabin straightening repairing and refitting and new lock changing. 3. New safety glass fitting with new rubber bit and new rubber lock.

1. New making of pin size Length 13.1/2 X OD 3.5/8.

Cutting the damaged head portion of the Brace Arm

1. New making of Pin (as per sample) size Length- 13.1/2x OD 3.5/8

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1.Front damage plate cutting size 4X12. 2.New plate welding in place of damage plate by steel and low hydrogen electrodes 3.Front ribs plate bending, shaping and welding size 6X5 4.Blade lower portion development with plate for cutting edge

1) Top and Bottom water tank opening and refitting. 2) All tubes cleaning by gagging with Hcl Acid 3) Leakage tube repairing. 4) Testing.

1. Broken bolt removing. 2. Fuel tank damaged/dent portion straightening and cutting. 3. Plate cutting from grounded machine for fuel tank. 4. Plate welding in damaged portion of fuel tank. 5. After welding grinding in welded portion.

1. Complete operator cabin repairing, denting and painting -2 nos. 2. Complete operator seat repairing -2 nos. 3. Fitment of safety glasses with rubber bit and rubber lock size

Repairing of screw of Brace assly by welding, machining and new thread making of BD355 Dozer SL.No. G15461/TR459 of ROCP/SJ, Bastacolla Area IX

Repairing of both side sprocket segment mounting holes in drum both side of dozer D355,sl no-G11544 of ABOCP mine of Block-II Area.

Repairing of Operator Cabin, Track Frame (LH and RH) and Final Drive Drum of BD155 Dozer sl. no. 13633 at Tapin North OCP, Hazaribagh Area

Radiator assy. cleaning, repairing and hade mounting bracket(attached in machine) repairing of dozer d355 s/n. 11556 of abocp mine of block-II area

Repairing of of A/C system of Dozer BD155 sl no 13633 and Dumper HD465-7 sl no 10355 at Tapin North OCP, Hazaribagh Area

Number writing by radium sticker for the (27 Nos.) EquipmentsDumper Sl. No. 3558 , 3562,3567,3568,3569,3570,3479,3719,3721,3767,60103,60159,60168,60169,60174,60175,60176,6074060754, Dozer Sl.No.TR 439, 487, 502,515, 516 , 12040 w/sp. 28189,441of DBO

Repairing of AC system (air conditioner) of water sprinkler sl no-28176,Model WS-28-II and BD Dozer sl no-11900 under TTK,OCP

1. Brake Servo Body complete Dismantling, Overhauling, fitting 2. Brake Served body complete fitting. 3. Brake PU Tube Assly, Removing fitting. 4. Brake adapter Removing, Repairing and fitting

Please Refer ANNEXURE B in Tender Document

1- Hydraulic Circuit Extension Lift Cylinder Complete Dismantling, Removing and Fitting. 2- Hydraulic Circuit Extension Lift Cylinder Bore Portion Scratch Welding, Machining, Honing and Polishing Proper Size.

Please Refer ANNEXURE B in Tender Document

1.Rear Both side Axle Differential Trumpet Housing Complete Dismantling, Fitting. 2.Rear Both side Axle Differential Trumpet Housing, Welding, Repairing, Bearing Size Oil Seal Size by Suitable Electrodes.

1- Complete Engine Dismantling, Overhauling and Fitting. 2- Complete Engine Machining Block Reboring Crank Polishing etc. Shop Charge. 3- Complete Radiator with Hose Pipe Clamp Removing, Fitting.

1- Steering Cylinder Complete Dismantling, Fitting. 2 Nos. 2- Steering Cylinder Bore Portion Scratching, Welding, Machining, Honing/Polish Proper Size. 3- Steering Cylinder Piston Scratch Welding, Repairing, Machining Proper Size. 2 Nos.

1- Parking Brake Adjuster Booster Complete Overhauling, RemovingFitting. 2- Parking Brake Adjusting Booster Body Complete Refacing/Honing. 3- Parking Brake Shoe Lining Removing and Changing, Fitting and Setting.

1- Complete Engine Dismantling, Fitting, Overhauling. 2- Complete Engine Machining, Block Reboring, Crank Polish etc. Shop Charge. 3- Complete Radiator with Radiator Hose Pipe and Clamp Dismantling,Fitting.

1. Dismantling and Fitting Complete Differential Crown Wheel with Tail Pinion Bearing, Bevel gear, Spider Kit etc. 2- Differential Crown housing, velding, repairing, Machining by Suitable Electrodes Proper Size.

Repairing/Cleaning of Radiator and oil cooler assembly of RT 630 Crane SL.No. 406769 of Kuya OCP, Bastacolla Area IX

Repairing of Tie Rod Assy. And L.H.S. Derriable Cylinder (Boom lift cylinder) of RT 880 Crane running at ABOCP Mines.

Repairing of defective propeller shaft assy and both sides plates of RT880 Crane of ABOCP mine of Block-II Area

Repairing, reconditioning of Control Panel attached with EOT Crane installed at Heavy Repair Shop under R.R. Shop (NK) Area Dakra

1. Dismantling of complete 02 nos hydraulic winch motor assly after cleaning fron outside. 2. Repairing of housing, welding, machining, grinding, honing, polishing, facing. 3. Hydraulic testing and fitting.

Please Refer ANNEXURE B in Tender Document

1. Front damage plate cutting size 2. New plate welding in place of damage plate by steel and low hydrogen electrode. 3. Front ribs new plate bending, shaping and welding size

1. Front damage plate cutting size 4x12. 2. New plate welding in place of damage plate by steel and low hydrogen electrode. 3. Front ribs new plate bending shaping and welding size 6x5. 4. Blade lower portion development with plate

1. Cracked portion of chassis both side gouging. 2. New bolts, nuts and washers 07 nos fitting. 3. Cracked portion chassis both side welding by steel electrode.

Please Refer ANNEXURE B in Tender Document

1. Front damage plate cutting size-4X12. 2. New plate welding in place of damage plate by steel and low hyd. Electrode.

1. Track frame cracked portion gousing. 2. Track frame welding by steel electrode. 3. Ribs cutting and welding by steel electrode. 4. Track frame diagonal broken portion gousing. 5. Track frame diagonal welding by steel electrode.

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Ball of Arm making it in original shape and size after taken out of ball from arm by gas cutter and developing of outer surface by welding and the making outer shape smooth by grinding and cracked portion welding by steel electrode.

1. Ball of arm making it in original shape and size after taken out of ball from arm by gas cutter and developing of outer surface by welding and making outer shape smooth by grinding and cracked portion welding by steel electrode.