Loading
Loading…
Loading…
841 results • Best match
LOCK FOR TRANSITION AND NON TRANSITION UPGRADED HIGH TENSILE CBC AAR TYPE 'E'FOR FREIGHT STOCK TO RDSO SK. 62724,ALT.28,ITEM 8 AND TO RDSO SPECN.NO.WD-70-BD-10 REV.3 OF MAY.2022.
Wear plate for striker casting(CBC housing) Size: Length 280mm x Width 75mm x Thickness 6mm as per IS: 2062, material : Mild steel. make:L1(AMBEY? ) @Rs 71/- +18% GST +Freight Rs 4.4 +Make:AE is accep
Pantograph for Freight Locos(AC application) as per RDSO spec no RDSO/2008/EL/SPEC/0066Rev. 0 dated 20.06.2008 and Amend 1 Dtd 31.12.08 Firm's Offer: PANTOGRAPH COMPLETE TYPE EL 01 WITH SERVO MOTOR ME
Brake cylinder 300 mm to RDSO drg. no. WD-92051-S-11 Alt.3.Matl.&Spec. confirm to 02-ABR-02 with amndt. No. 4 of Sept.2016 Appindix-B for air brake freight stock.
BRAKE CYLINDER 355 mm FOR FREIGHT STOCK, CONFORMING TO APPENDIX -B OF RDSO SPEC. NO. 02- ABR-02 WITH AMENDMENT No. - 4 of Sept. 2016 as per RDSO drawing WD - 92051- S-06, ALT : 5.
PANTOGRAPH FOR AC FREIGHT ELECTRIC LOCOMOTIVES (WITH 5 % EXTRA THROTTLE VALVE) TO RDSO SPEC. No. RDSO/2008/EL/SPEC/0066, REV. '0' WITH AMENDMENT NO.1 DTD 31.12.08, TO MODIFICATION SHEET NO. ELRS/MS/0
BRAKE CYLINDER 355MM FOR FREIGHT STOCK TO DRG. NO. WD-92051/S-6, ALT.5 AND TO SPEC. NO. APPENDIX-'B' OF 02-ABR-2002, AMENDMENT NO.4 OF SEP.2016 Firm's offered make: KE
Seal Wear Ring (without vent hole) for Cartridge Taper Roller Bearing, Class-E, (6 x 11) used on freight stock to M/s NEI Ltd. Drg.no.PESD-6085, Rev.D, Part no.PESD-6075,Other Technical Requirements c
Yoke Pin for Transition and Non Transition CBC for For Freight Stock to RDSO DRG. No.SK-62724,Alt-28, Item No.12 Conforming to RDSO SPEC.No. WD-70-BD-10(Rev-2) of Nov.17
AAR Approved Cartridge Tapered Roller Bearings Class 'K' (6 1/2"X9") along with Backing Ring, Adapter, End Cap, End cap Screw, Locking Plate, Side Frame Key Key bolt etc. for Freight Stocks Fitted wit
Brake cylinder 300 mm for Brake Van for Freight Stock. Drawing No. : RDSO's DRG. NO.WD-92051-S-11 Alt.3, Item 1 to 15 &17 in assembled condition. Material and Specification : As per Drawing and
Low Torque Grease Seal for AAR Standard Upgraded Class E (6 X 11) Cartridge Tapered Roller Bearings used in freight stock confirming to RDSO specification No. WD-63-MISC-2020 of October 2020 with late
STRIKER CASTING WEAR PLATE FOR UPGRADED HIGH TENSILE CBC FOR FREIGHT STOCK WITH MANUFACTURER INITIAL AND MONTH AND THE YEAR OF MANUFACTURED BY METAL LASER ENGRAVING IN 6 MM SIZE AND 0.1 MM DEPTH MINIM
Brake cylinder 300 mm to RDSO drg. no. WD-92051-S-11 Alt.3.Matl.&Spec. confirm to 02-ABR-02 with amndt. No. 4 of Sept.2016 Appindix-B for air brake freight stock.
Broad gauge wheel tyre defect gauge for freight stock (With flat tyre 60 mm as per Indian Railway Standard made of 3.8mm or 3.1mm thickness of Hardened stainless steel plate with laser marking used fo
Description is as under, POH Kit for Automatic Pressure Modification Device (EL-60) for BMBS fitted on Freight Stock consisting of 23 items to M/S Knorr Bremse India Pvt. Ltd. part numbers as under:
BRAKE CYLINDER 355MM FOR FREIGHT STOCK TO DRG. NO. WD-92051/S-6, ALT.5 AND TO SPEC. NO. APPENDIX-'B' OF 02-ABR-2002, AMENDMENT NO.4 OF SEP.2016 Firm's offered make: KE
BRAKE CYLINDER 300 MM COMPLETE FOR AIR BRAKE ON FREIGHT STOCK TO RDSO's DRG. NO. WD-92051-S-11, ALT.NO.-3 (THREE) AND RDSO's SPECN. NO. 02-ABR-02, WITH APPENDIX-B. Accepted Make: KE
AAR Approved Cartridge Tapered Roller Bearings Class 'K' (6 1/2"X9") along with Backing Ring, Adapter, End Cap, End cap Screw, Locking Plate, Side Frame Key Key bolt etc. for Freight Stocks Fitted wit
Brake cylinder 300 mm to RDSO drg. no. WD-92051-S-11 Alt.3. Matl. & Spec. confirm to 02-ABR-02 with amndt. No. 4 of Sept.2016 Appindix-B for air brake freight stock.
Dirt collector Assembly for Air Brake of freight stock to RDSO Drawing. No. WD-92051-S-03, Alt.No.4 confirming to RDSO Specification.No.02-ABR-02 with Amendment No.4 of September-2016 [Appendix-E].
M16 X 90 BOLT with Nuts & Split Pin for ESCORTS Design BMBS.Drawing No. - Escorts Drg.No. 4EB10272.Material and Specification - As per operation and maintenance manual of Escorts make BMBS for Freight Stock with Casnub Bogie
Goods and Transport Service for Over Dimensional Cargo (ODC) - PAX STEP TLD ID 2723 2741; Any Suitable Vehicle as per transportation; Any Suitable Vehicle as per transportation; Outside state; More than 1000 Kms
Goods and Transport Service for Over Dimensional Cargo (ODC) - Any Suitable Vehicle as per transportation; Any Suitable Vehicle as per transportation; Any Suitable Vehicle as per transportation; Outside state; More than 1000 Kms
Custom Bid for Services - Transportation services Similar Category Goods Transport Service – Per MT per KM Based Service Goods and Transport Service for Over Dimensional Cargo (ODC) Goods Transport Service – Per KM Based Service
Setting out finalized alignment and assistance to Land Acquisition activities for Construction of East-West Dedicated Freight Corridor (EWDFC) from New Rourkela (Excl) to New Uslapur (Incl) in state of Odisha and Chhattisgarh under CGM/Jharsuguda
BRAKE CYLINDER 355MM FOR FREIGHT STOCK TO DRG. NO. WD-92051/S-6, ALT.5 AND TO SPEC. NO. APPENDIX-'B' OF 02-ABR-2002, AMENDMENT NO.4 OF SEP.2016 Firm's Offer: Make Brand- MIPL
Brake Cylinder 355mm for Air brake system on freight stock to RDSO DRG. No. WD-92051-S-06, Alt-5, & other technical requirements conforming to STR No. 02-ABR-02, Appendix -B, Read with all Amendments,
Locking arrangement for CBC uncoupling handle/Rod for freight stock consist of 10 mm dia rod with 5 mm thick collar plates welded with semi circle slot lock plate confirming to Drg.No.-WD-00046-S01, a
Grease Seals for application on AAR standard Class `E' (6x11) bearings used on CASNUB Bogies of Freight Stock RDSOs Spec No.WD-50-Misc-2007 of Oct 2007 or Latest. Firms offer: GREASE SEAL FOR CTRB 6
NARROW JAW ADAPTER FOR CLASS 'E' 6"X11"CTRB USED ON FREIGHT STOCK TO RDSO'S DRG.NO.WD-89067-S-9, ALT.NO.-6, AND OTHER TECHNICAL REQUIRMENTS CONFORMING TO RDSO'S STR.NO.AB/RB-39-2002 (REV.3) OF DEC
KNUCKLE PIVOT PIN WITH WASHER FOR TRANSITION & NON TRANSITION UPGRADED HIGH TENSILE CBC FOR FREIGHT STOCK TO DRG.NO.ITEM 4 OF RDSO SK.62724, ALT.26 AND TO RDSO SPECN.NO.WD-70-BD-10 (REV.2) OFNOV-2017
BRAKE CYLINDER 300 MM COMPLETE FOR AIR BRAKE ON FREIGHT STOCK TO R.D.S.O'S DRG. NO. WD-92051-S-11, ALT.NO.-3 (THREE) OR LATEST. ACCEPTED DESCRIPTION -BRAKE CYLINDER 300 MM COMPLETE FOR AIR BRAKE ON FR
STRIKER CASTING WEAR PLATE FOR UPGRADED HIGH TENSILE CBC FOR FREIGHT STOCK TO DRG..NO.WD-87056/S-1, ALT 4. RDSO SPECN.NO.WD-70-BD-10, (REV.2) OF NOV.2017. FIRM'S OOFER: AS ABOVE. MAKE/BRAND:
BRAKE CYLINDER 300 MM COMPLETE FOR AIR BRAKE ON FREIGHT STOCK TO R.D.S.O'S DRG. NO. WD-92051-S-11, ALT.NO.-3 (THREE) OR LATEST. ACCEPTED DESCRIPTION-BRAKE CYLINDER 300 MM COMPLETE FOR AIR BRAKE ON FRE
Brake Cylinder 355mm for Air brake system on freight stock to RDSO's Drg. No. WD-92051-S-06, Alt-5, & other technical requirements conforming to STR No. 02-ABR-02, Appendix -B, Read with all Amendment
YOKE PIN FOR TRANSITION AND NON TRANSITION UPGRADED HIGH TENSILE CBC FOR FREIGHT STOCK TO DRG.NO.ITEM 12 OF RDSO SK-62724, ALT.27 TO RDSO SPECN. NO WD-70-BD-10 (REV.2.) OF NOV.2017.
Brake Cylinder 355mm for Air brake system on freight stock to RDSO DRG. No. WD-92051-S-06, Alt-5, & other technical requirements conforming to STR No. 02-ABR-02, Appendix %u2013B, Read with all Amend
Brake cylinder 300 mm to RDSO drg. no. WD-92051-S-11 Alt.3 or latest.Matl.&Spec. confirm to 02-ABR-02 with amndt. No. 4 of Sept.2016 Appindix-B for air brake freight stock..
Brake Cylinder 355mm for air Brake on Freight and Passenger Brake on wagon to RDSO [W] Drg.No.WD-92051-S-06,Alt.No.-5 And RDSO Specn.No.02-ABR-02 of Appendix 'B'Amend No.3 of April-2010.
YOKE PIN FOR TRANSITION AND NON TRANSITION CBC FOR FREIGHT STOCK TO RDSO DRG. NO. SK-62724, ALT. 28, ITEM NO. 12 CONFORMING TO RDSO SPEC. NO. WD-70- BD-10 (REV. 3) OF MAY 2022.
Dirt collector complete for freight stock to RDSOS drg. No. WD-92051-S-03, Alt.No.- 4 or latest And RDSOS Specn. No.WD-02-ABR-02, Appendix - E with amendment no.4 of Sep 2016 or latest.
KNUCKLE PIVOT PIN WITH WASHER FOR TRANSITION & NON TRANSITION HIGH TENSILE CBC FOR FREIGHT STOCK TO DRG.NO.ITEM. 4 OF RDSO SK 62724, ALT.28, AND TO RDSO SPECN.NO.WD-70-BD-10 (REV.02) WITH AMEND.NO. 2
BRAKE CYLINDER 300 MM COMPLETE FOR AIR BRAKE ON FREIGHT STOCK TO R.D.S.O'S DRG. NO. WD-92051-S-11, ALT.NO.-3 (THREE) OR LATEST. ACCEPTED DESCRIPTION- BRAKE CYLINDER 300 MM COMPLETE FOR AIR BRAKE ON FR
KIT FOR ANTI PILFERAGE DEVICES [APD] FOR FREIGHT STOCK CONSISTING OF 4 ITEMS. (1) SPLIT COLLAR IN TWO HALF AS PER DRG. (ANNEXURE- II ATTACHED) HAVING DIMENSION OUTER DIA.70 MM, INNER DIA. 39MM AND TH
Brake Cylinder 355mm for air Brake on Freight and Passenger Brake on wagon to RDSO [W] Drg.No.WD-92051-S-06,Alt.No.-5 And RDSO Specn.No.02-ABR-02 of Appendix 'B'Amend No.3 of April-2010.
Axle End Cap for Upgraded CTRB Class "E" (6" x 11") for use on Freight Stock to NEI Drawing No. RBSD-7111 and Confirming to RDSO Spec. AB/RB/-40-2016 (Rev -2). Make: NBC Spec:
Air Brake Cylinder 355 mm complete for freight stock to RDSO Drg. No. WD-92051-S-06, Alt. 5, Spec. No. 02-ABR-02 with Amendment- no. 4 of Sept. 2016 & Appendix-B. Make/Brand: MIPL.
Pipe 32 N.B. with sockets flanges & fixed flanges (welded assembly) for freight stock.Drawing No. : RDSO,s Drg. No. WD-80007-S-11, Alt.12 , Item No. 3, fitted with Item Nos. 12, 13 & 14. Material and
Overhauling kit No.14 for slack adjuster type IRSA-600 for freight stock as per RDSO's Specn.No. 07-ABR-92 with 5 amendments- last amendment no-5 issued on September 2016 Details as per Annexure attac