Industrial Machinery Tenders in Chhattisgarh

Service contract for Application of Airseal in stage1 and 2 boiler for 02years during unit overhauling NTPC Barh

Set of Wire rope safety sling (under slung compressor) for three phase locos

AOH kit for Main compressor 1750/1745 LPM used in three phase Locomotives

AOH kit for Main compressor 1750/1745 LPM used in three phase Locomotives

Contactor for Head light, Auxiliaries Compressor and GUSP (Pos no 48.2,338,218.2), & Auxiliary contactor

AOH kit for Main compressor 1750/1745 LPM used in three phase Locomotives

Custom Bid for Services - ---- Similar Category Operation And Maintenance Of Gas Compressor Station

Work of cleaning / removal of spillage coal / slurry, muck at S0, S2 and S3 conveyor drive house, gantry, tail end and feeder breakers to avoid jamming and smooth running of conveyor and feeder breaker at CHP of Gevra project.

Repairing/fabrication of walkway plateform in between conveyor 35/ conveyor 36 hopper of TRS -1 and (ii) Repairing / replacement of damaged pipe line, spray nozzles , valves , sprinklers etc of TRS-1 for dust suppression under CHP phase -1 , KOCP

Work for assistance in operation of sump pump at R2 conveyor below 5000 Te ground bunker and C5C6 conveyor below 30000 Te ground bunker at back up of Gevra project on as and when required basis for 365 days.

Proposal for Overhauling Of Boiler APHs AND Fans of 1 Unit of 800 MWBoilers at NTPC Lara.

Rate Contract for Spares of LT HOWDEN for Boiler Fans, APH and FGD plantfans at NTPC Stations

SUPPLY AND APPLY OF PAINTS ON STRUCTURAL STEEL IN BOILER AND ITSAUXILIARIES AREA UNIT 2 (200MW) STAGE I, NTPC RSTPS

AIR MOTOR SPARES FOR ST I BOILER AT NTPC LTD DARLIPALI STPP (2 X 800MW) ODISHA

Procurement of Integrated prelubricated cartridges with rotating spindle suitable for 800mm top and 1000mm top conveyor rollers

Removal of silt and slush deposited at P3Q3 series conveyor belt of Gevra Project of Gevra Area.

Making RCC Box Culvert at tail end of J3K3 conveyor system at Gevra Project of Gevra Area.

Urgent cleaning of silt/muck/slush etc from conveyor belt series at Gevra Project of Gevra Area.

Job Contract of foreign material picking from running coal conveyor at CHP in NTPC Sipat and Lara

Procurement of CONVEYOR BELT (NN-EP) up to 1400mm width for NTPC Rihand, Farakka, Ramagundam and Kahalgaon.

Making RCC Box Culvert at tail end of J3K3 conveyor system at Gevra Project of Gevra Area

Repairing/making of bottom and top idlers for 1600 mm conveyor required for CHP phase-1, KOCP.

Providing Gabion wall along the dump area around conveyor belt of Dipka Expansion Project at Dipka Area

Maintenance work of coal sampler units installed with conveyor C37 and C38 at CHP phase-1, KOCP

Providing RCC box culvert below conveyor belt near TH-8 at Dipka expansion project of Dipka Area

Screening Machine with Conveyor for processing Municipal Waste (Q2) MSE Exemption for Years of Experience and Turnover

For various ancillary work for smooth operation of belt conveyor in CHP/Siding at Rajnagar RO Colliery.

Custom Bid for Services - 200124796 Removal of metal foreign material from MD MS from CHP conveyor system

Surveillance on Thickness Survey of Boiler Tubes during OH of Unit1 in 2021 to 22 and Unit5 Unit6 in 2022 to 23

200136112 Contract for Supply and Apply of Airseal in Boiler and Auxiliaries of Stage I II units during Overhauling at NTPC SIPAT

Operation of the Under Floor Pit Wheel Lathe Machine for wheel turning of 3-phase electric locomotives for a period of 02 years at ELS/BSP.

Operation And Maintenance Of Other Machines And Plants - Annual maintenance contract for 10 nos of compressors installed in Compressed Air Station 1 and 2

200146881 AIRSEALING WORKS IN BOILER STAGE I AND II AND FAN,APH GUIDEBEARING IN ST II AT NTPC KAHALGAON.

Supply of Spares for Boiler Feed Pump FK4E36 and Booster Pump FA1B75 forNTPC Sipat STPS Stage II 2x500 MW

Custom Bid for Services - 200139353 Biennial Contract for Inspection and Assistance for 800 MW Boilers at NTPC Lara Similar Category Operation and Maintenance Power House/Power Plant

BEVEL INPUT PINION SHAFT, PART NO. - SAD26B340017, SEC0ND STAGE PINION SHAFT, PART NO. - SAD3B340017, THIRD STAGE PINION SHAFT, PART NO. - SAD4B340017, BEVEL WHEELE, PART NO. - SAD7B340017, SECOND STAGE WHEEL, PART NO. - SAD8B340017, THAIRD STAGE WHEEL, PART NO. - SAD9B340017, INPUT OIL SEAL, PART NO. - SAD10B340017, OUTPUT OIL SEAL, PART NO. - SAD11B340017, BEVEL PINION SEAT KEY, PART NO. - SAD21B340017, BEVEL WHEEL SEAT KEY, PART NO. - SAD22B340017, FAN, PART NO. - SAD25B340017, HOLD BACK, PART NO. - SAD35B340017, BEVEL INPUT PINION SHAFT, PART NO. - SAD26B325014, SEC0ND STAGE PINION SHAFT, PART NO. - SAD3B325014, THIRD STAGE PINION SHAFT, PART NO. - SAD4B325014, THIRD STAGE WHEEL, PART NO. - SAD9B325014, BEVEL WHEEL, PART NO. - SAD7B325014, SEC0ND STAGE WHEEL, PART NO. - SAD8B325014, INPUT OIL SEAL, PART NO. - SAD10B325014, OUTPUT OIL SEAL, PART NO. - SAD11B325014, BEVEL PINION SEAT KEY, PART NO. - SAD21B325014, BEVEL WHEEL SEAT KEY, PART NO. - SAD22B325014, FAN, PART NO. - SAD25B325014, HOLD BACK, PART NO. - SAD35B325014 Bid Number : GEM/2025/B/6831644 Dated : 30-10-2025 Bid Document 1/33

As per NIT

(i)Dismantling, transportation and installation of one no. 800mm size single drum drive heads without loop take up at 107/85D (ii) Transportation of 280m conveyor belt from old district/surface to 107LE and laying of same on conveyor structure (iii)

Preparation of gallery along (-)4LS from 1Dip to 11Dip for installation of belt conveyor (i) Drilling, Blasting, widening and mucking manually in gallery and stacking the same within 15m lead. (ii) Dismantling of Belt conveyor and drive head (iii) I

Carrying out structural stability tests on conveyor belt structure, RC feeder, Feeder Breaker, Bunker Structure of Bhatgaon CHP and Surge Bunker of Bhatgaon Area n Carrying out structural stability tests on Conveyor Belt structure of TB-1 and TB-3 No

Transportation and installation of 1000 mm belt conveyor including structures, PVC Belt, Top and Bottom Rollers along with one drivehead of 2 x 90 kW (complete with all conveyor drums, 90 kW Motors along with Starters, gearboxes, loop take-up arrange

Ancillary work for smooth operation of underground Belt conveyor at Bijuri colliery of Hasdeo Area (TB1, TB2, TB3, 11LS Ist, 11LS 2nd, 11LS 3rd, 52D and 26LS) of Belt conveyor in seam A and seam C of total length 3335 m.

Dismentling, Transportation, Installation and extension of 1000mm wide belt conveyor for 71L(W) district along 71L(W)from 2D to 43Dip total length 1270 mtr. (old 1000mm wide belt conveyor to be dismentling from 76L dist. of CMP3 length 840 mtrs.

Facility Management Services - LumpSum Based - Industrial; Deployment of hired JCB machine or equivalent for cleaning of outside the belt conveyor of C R L series of inpit conveyor miscellaneous work at Backup of Gevra Project for a period of 1095 d..

SUPPLY AND APPLY OF PAINTS ON STRUCTURAL STEEL IN BOILER AND ITSAUXILIARIES AREA IN ONE UNIT (500MW) STAGE III NTPC RSTPS

Contract for Supply and Apply of Airseal in Boiler and Auxiliaries ofStage-I and II units during Overhauling at NTPC -SIPAT

SUPPLY AND APPLICATION OF PAINT ON STRUCTURAL STEEL IN BOILER AND ITSAUXILIARIES AREA OF UNIT 3 NTPC SIPAT 3X660MW STAGE I

Gear box base jamming work at 22 L and 3 dip 1st belt of Seam V and Installation of one 1000 mm double drive at 4L/ 1 dip (Seam IV B) to divide existing surface belt into two belts of Jhilimili Mine.

Overhauling of boiler pressure parts, APH, DUCT, MILL, Burners, Fans, hanger supports and associated works in one units of NTPC Lara STPP in 2020-21

Regular cleaning of coal dust/ malma/ spillage coal of TB-1 to TB-4 Trunk Belt Conveyors at Gayatri UG Mine of RGK Sub Area of Bishrampur Area.