Industrial Machinery Tenders in Jharkhand

Procurement of S20-N-2002 Conveyor belt in urea plant at HURL, Sindri

Maintenance daily checking repairing /replacement of bearing block conveyor pulley gear box motor roller bracket deck plate stringer leg supporting stringer and other related jobs of storage section Conveyor belt C14 and C15 and ground bunker

Complete Overhauling of Atlas Compressor Copco (Model GA160), Qty-02, Sl.no. Comp No.-03 and Comp No.-04 of Compressor House of Moonidih Colliery

Daily maintenance of belt conveyors 1200mm in underground from D- 18 Long wall face to main Bunker at Moonidih colliery, WJ Area.

Daily maintenance of belt conveyors 1200mm in underground from D- 16 Long wall face to main Bunker at Moonidih colliery, WJ Area

One time cleaning of spilled coal/slurry around loading bunker and gantry of clean coal and middling coal conveyors at Sawang Washery.

Assistance in mechanical operation of Boiler, Turbine and associated auxiliaries of Unit 9

Supply of Spares for Boiler make- Thermex Model - RXD-06 and RXD-850 for Indian Oil Corporation Limited, BDG-Explosives, Block-II plant

Level Gauge, Check Valve, Pressure Relief Valve, Heat Exchanger, Needle Valve, Duplex Filter, Orifice Plate, Y Strainer, Filter Cartridge

Semi-Automatic Sanitary Napkin Pad Production Machine Setup including other accessories, Air Compressor, UV Sterilizer, De- Fiberation Machine, Napkin Core Dies, Training Kit

Minimising gap between crusher roll drum and impact plate for Gondudih feeder breaker under GKKC.(BCCL/KAVI/EnM/2020-21/89)

Repairing, Fabrication/Erection of steel structural work for 40BC conveyor change and middling coal shuttle conveyor change with roller frame dismantling repairing/refitting etc. complete in Main Plant of Sawang Washery.

Replacement of the Drive Drum Assembly for unit 402 belt conveyor and snub drum assembly for unit 903 belt conveyor after dismantling of existing worn-out drums at Moonidih Coal Washery.

Fabrication, Erection of steel structural work and replacement of conveyor belt, repairing of roller frame, skirt frame skirt rubber etc in ROM belt conveyor in Raw Coal Section at Sawang Washery.

1. Manpower assistance in operation of Conveyor-15 and16 and auxiliaries of CHP, BTPS. 2. Manpower assistance in operation of Conveyor-17 and 18 including TTR and auxiliaries of CHP, BTPS.

Transporting and Installation of Belt Conveyor (1000mm, 600TPH Conveyor Belt with drive capacity 1x90kW, 550 Volts, Approx Length of belt 500M) including foundation work along 51L at Churi Colliery, NK Area.

Upkeepment of 201 belt conveyor deck plat, tail end area, conveyor gallery, sump pump pit of PS-1 section of ROM section at Madhuban Coal Washery under Block-II Area, BCCL.

Removal of old compressor assly and modification of complete mounting and fitting of serviceable compressor assly of RECP 750 Drill sl no 501 at ABOCP of Block II Area

Painting of Tool boxes (15 nos.), lathe machine, Grinding machine and entry gate of Topa excavation department, Topa Ocp, Kuju Area.

Maintanance and Repairing of Lathe machine sl. No. HMT LT 20, no. 2121 at Regional Repair shop, Tapin North, Hazaribagh Area

Providing and shifting of gear pinion and v-belts of lathe machine installed at TDV (EnM) under Darka Project, NK Area

Repairing /Overhauling of one No. Lathe Machine Make H.M.T Local Id No. JEL/WSHOP/01 of Jealgora Workshop under Lodna Area.

COMPLETE REPAIRING AND OVERHAULING OF LATHE MACHINE RKC MAKE M.K.ENTERPRISES SL.NO.2215 AT WORKSHOP OF RAMKANALI COLLIERY UNDER AKWMC KATRAS AREA

Repairing of 02 nos. Lathe Machine, 02 nos. Static Drill Machine, 02 Nos Hand drill Machine of EnM workshop, Sirka Colliery

Simulator Training machine for Heavy earth moving machinery

Item Related to Maintenance of Machinery and Equipments

Repairing of LHS Idler bend foundation straightening of Model RECP-650 Drill Sl. No. RDC-1413 and Repairing of RHS swing gear box assembly of 182-Marion Shovel Sl. No. Exc-1851 at Kathara Colliery.

Repairing of Worn out feed sprocket, pin and bush fitting and repairing of gear box shaft spindle and repairing of dust diverter blower bearing shaft of IDM drill DR242 at Nichitpur OCP of Sijua Area.

Repairing of Gear Box and Repairing /Replacement of Tail and Crown, Bull Pinion shaft and Clutch, Pressure Plate, Release hub required mis. Items in 12XW ACE Crane sl. No. 61410255 at Rohini Project, NK Area.

Repairing of rake lifting device gear assembly of radial thickener no. II and 02 nos. vertical shaft of gear box assembly of thickener no. I and II (standby) of Fine Coal Section at Kathara Washery

Overhauling and Repairing of Gear Box Rear Both Side Spring Clutch System Self Alternator Propellar Shaft Air Booster Kit changing of TATA Tripper (T.C. Model ) No.JH10D-9784 of Amal.NT-ST-JG Colliery under Lodna Area.

Repairing of Gear box housing , clutch system and ball pinion shaft of ACE 12T crane sl. no. 6131223523 and repairing fabrication of 04 nos. leveling jack pad of RT740B crane sl. no. 408042of Jharkhand OCP.

Replacement of damaged/ decayed overhead monorail arrangement, platform straightening and supporting of case for maintenance with safety of gear box motor, drive pulley of 303 and 304 belt conv. Of main plant of Kedla Washery

Replacement of damaged/decayed head drive arrangement (drive base frame) along with discharge chute after gear box drive and snub pulley dismantling and re-installation of unit 207 B/E main plant of Kedla Washery

Repairing of lift cylinder and its mountings of RT880 75T Crane Sl. No. C10 at Ashok OCP and Repair of hoist and travel gear box of 25T and 10T EOT crane at Piparwar workshop, AOCP

Repairing and fitting of damaged/decayed bucket link assly. 52 set of 800mm width of 207 bucket elevator along with lining plate, angle and gear box, duplex driving chain maintenance main plant of Kedla Washery

Custom Bid for Services - Repairing of gear box and replacement of output oil seal with shrink disc and discharge wheel arms in 16 2 and 17 2 plough feeder of Reclaim Section at Rajmahal CHP

Manpower assistance in operation of Conveyor#4C/4D and auxiliaries of CHP,BTPS

Metal Detector for Conveyor Belt of width: 1600mm as per technical specification attached.

Repairing of Fluid Coupling 150 KW Conveyor belt in CCS Ckt., Moonidih Project.

Hot vulcanizing of unit 301 belt conveyor of MCW under Block II area.

Repairing of C-3 conveyor belt head drum platform of Dugda Coal Washery

Strengthening of structural column and conveyor of Raw coal section at Kathara Washery

Replacement of 900 mm wide conveyor belt in 801A at Moonidih Coal Washery.

Repairing/ replacement of damaged discharge chute of unit no. 16 conveyor at SCW.

Vulcanizing joints of Conveyor Belts of preparation plant section at Sudamdih Coal Washery.

Hiring of JCB for tree uprooting works in CHP Part A Conveyor Corridor

Replacement of 1200mm Conveyor Belt of F/B No. III Kessurgarh ABOCP Mine

Repairing/replacement 129,130,131,118,119A and 119B conveyor belt discharge chutes of Dugda Coal Washery

Manpower assistance in operation of Conveyor 4C/4D and auxiliaries of CHP, BTPS.