PPE & Safety Equipment Tenders in West Bengal

Thread cutting machine, Metal scrubbing brush, Safety jackets, Writing Brush, Rubber Hand Gloves, Face Mask

LEATHER SAFETY GLOVES FOR GENERAL PURPOSE TO ICF/SPECN.NO. ICF/SAFETY/SPECN. NO.15 REV. STATUS 04. DT.17/06/2017 (CHROME TANNED COW/YOUNG BUFFALO SPLIT LEATHER AS PER IS.2573/1986 (REAFFIRMED-2009)

LEATHER SAFETY GLOVES FOR GENERAL PURPOSE TO ICF/SPECN.NO. ICF/SAFETY/SPECN. NO.15 REV. STATUS 04. DT.17/06/2017 (CHROME TANNED COW/YOUNG BUFFALO SPLIT LEATHER AS PER IS.2573/1986 (REAFFIRMED-2009)

Industrial Safety Helmet to CLW Spec. No-MSO/33/Specification/V-03,Dated-28.04.18 and Conforming to IS:2925/1984 or CE marked as per EN-397 as per IS:2925/1984 or CE marked as per EN-397. Spec: MSO/33

Supply of Lead Seal Wire with 12 mm. Dia (Tablet) and Length 100 mm., wire Dia = 0.68 mm for seal safety equipment of signal & Telecom department.Inspection by Consignee.

SPL REP TO LT DISTRIBUTION AND CONTROL SYSTEM AT CERTAIN TECH AND NON TECH AREA AND REPAIR TO EM SAFETY EQUIPMENTS AT AFS ARJAN SINGH AT AFS ARJAN SINGH PANAGARH

Urgent Electrical work for installation of a newly proposed MRI machine under PPE model at Balurghat Super Speciality Hospital, District Dakshin Dinajpur

PART 65 NEW SUBMARSHIBLE, WATER PPE LINE ANDD WATER TANK FOR DRINKING WATER WITH FILTER MACHINE INFRONT OF HIGH ROAD PARTY OFFICE

PAIR OF LEATHER HAND GLOVES CONFORMING TO DLW SPECIFICATION NO.MP/SAFETY/SPEC/PPE/1 (Ed-8) VALID FROM 18-07-2019. SPT

safety boots or industrial gum boots-PVC ( PAC Only ) Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 2 Year (s) Safety Boots Or Industrial Gum Boots-PVC ( 100 ) ( Under PAC ) Make na Model duckbackgumbootsuperiorquality Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Governing Specification Conformity to Indian Standard IS 12254 (Latest) * Certificate ISI Marked true true, false CML No. (If ISI Marked) 9691203 * Material Material PVC * Relative density of the material (Max) 1.25 * Knitted Fabric lining With With, Without Steel Toe Cap Confirming to Type 2 of IS 5852:1992) With With, Without 1/3 SIZE Boot Size Assorted Sizes (5, 6, 7, 8, 9, 10 and 11 ) as per buyers requirements 5, 10, 11, Assorted Sizes (5, 10 and 11 ) as per buyers requirements OTHER REQUIREMENTS Compliance to cold flex requirement as per clause 5.13 of IS 12254 Latest true true, false STYLE AND END USER End User Men Men, Women Boot Style Half Knee Ankle, Half Knee, Short Knee, Knee, Thigh Leg Height of Boot (mm) 10 * No. of Eyelets at each face ( in case of Ankle Boot) NA * Colour Colour Black * Test Report Availability of Test Reports from Central Govt./NABL/IL AC acredited Lab to prove conformity to the standard Yes * Test reports to be furnished to buyer on demand yes * Test Report No 178/6525 * Address of the Lab LUDHIYANA * Name of the Lab ARMECK LABS * Test Report Date 19/05/2017 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anjani Kumar Singh 741166, 81 BATTALION BORDER SECURITY FORCE (BSF) SEEMANAGAR DISTT- NAIDA (WB) PIN- 741166 100 15

Supply of different type of Fire Extinguishers for DSTPS DVC Andal

PVC Industrial and Protective Rubber Ankle Knee Gumboots with steel toe, oil resistant and anti slip design, as per IS:5557 or latest if any, Sizes: 10--04 pairs, Size: 09--07 pairs, size: 08--09 pair

Half Knee Men Poly Vinyl Chloride Safety Gumboots for rainy season Boot Size and required quantity: Size 6 - 10 pairs, Size 7 - 20 pairs, Size 8 - 60 pairs, Size 9 - 30 pairs, Size 10 - 10 pairs, Size

CUT RESISTANT HAND GLOVES CONFIRMING TO DLW SPECIFICATION MP/SAFETY/SPEC./PPE/24 (REVISION-12) DATED 31.07.2014. Accepted make - SAFEWELL, firm's own make

PAIR OF LEATHER HAND GLOVES CONFORMING TO DLW SPECIFICATION NO.MP/SAFETY/SPEC/PPE/1[ED-9] OF DATED 20/08/2022. Make SPT

Leather Hand Gloves for Welder to WCR specification WCR/PPE/ Spec/Leather hand gloves/01" as per Annexure attached. MAKE-PODDER INDUSTRIES-PI

CUT RESISTANT HAND GLOVES CONFIRMING TO DLW SPECIFICATION MP/SAFETY/SPEC./PPE/24 (REVISION-12) DATED 31.07.2014. Accepted Make /Brand: Firms Own Make

Construction of Decentralized SWM Unit under Panchberia Gram Panchayat of Segregation and Storage shed for Plastic Waste and cart and Waste Bin and others (Household, Institute ( Buckets),Safety Equipments, Tools and Accessories)

PVC Industrial and Protective Rubber Ankle Knee Gumboots with steel toe, oil resistant and anti slip design, as per IS:5557 latest if any, Sizes: 6 =10 Nos, Size-8=40 Nos, size-9=20 Nos, size-10=9 Nos

WBSO LPG Mechanical works including Supply, Fabrication, Erection, Installation, Commissioning of Different Product Pipe Line, MVWS Sprinkler Systems, Hydrant headers, Utility Lines with Required Fittings, Valves, Safety Equipment etc. at KALYANI BP.

SUPPLY AND DELIVERY REFLECTIVE JACKET AT THE MUNICIPALITY OFFICE FOR CONSERVANCY WORKERS IN WARD NO 1 TO 35 UNDER PANIHATI MUNICIPALITY.

Procurement of about 2 Lakhs units (likely to be increased) of PPE Kits (71 GSM) by Tantuja for subsequent supply to Health and Family Welfare Department.

Supply of Safety Equipment (like, gloves,Gum Boot, Hammer, Shovel, Spade,Scythe, Dress forall unit Person, Strainr, Scale andWeigth, Polythene Sheet, Rope,pipeetc)under Kshirogram GP under Mongalkote PS under SBM-G Fund

Supply of Road Safety Equipment

Lime Stone Dust, Un Slacked Lime, Barricade Tape 25 MM, Fluorescent Jacket, Safety Goggles Photo chronic Glass

Industrial safety shoe (Electrical) black leather as per IS:15298 (part I &II) :2011, ISO 20345:2004 & DLW"s specification No MP/Safety /Spec/PPE/10(Revision-15).

INDUSTRIAL SAFETY BELT Full Body Harness As Per IS 3521 (Part I): 2021 Specification - Classified as Personnel Protective Equipment (PPE) Class A Fall Arresting, Ladder Climbing, Corrosion Resistance,

DESIGN, SUPPLY ,INSTALLATION AND IMPLEMENTATION OF AI BASED PPE SOLUTION FOR HALDIA REFINERY WITH ALL ASSOCIATED SYSTEM ARCHITECTURE, HARDWARE AND SOFTWARE COMPONENTS, DEPENDENCIES, LICENSES, INSTALLATION, TESTING, TRAINING AND MAINTENANCE

Cotton Hand Gloves,Rubber dots on Palm and finger SIZE - 09/10 NO & (225-270 MM) SPEC-MP/Safety/Spec/PPE/Cotton Hand Gloves. Dated 19.09.2023 Make/Brand; Self

M2966880069, M2966696005, M2966696005., M2966880066, M2966880066.

safety boots or industrial gum boots-PVC Average Turn Over of Last 3 Years 12 Lakh (s) Experience with Gov. Required 2 Year (s) Safety Boots Or Industrial Gum Boots-PVC ( 498 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Governing Specification Conformity to Indian Standard IS 12254 (Latest) - Certificate ISI Marked true true Yes is better CML No. (If ISI Marked) 3353892 - Material Material PVC - Relative density of the material (Max) 1.25 - Knitted Fabric lining With With Steel Toe Cap Confirming to Type 2 of IS 5852:1992) With With SIZE Boot Size Assorted Sizes (5, 6, 7, 8, 9, 10 and 11 ) as per buyers requirements Assorted Sizes (5, 10 and 11 ) as per buyers requirements OTHER REQUIREMENTS Compliance to cold flex requirement as per clause 5.13 of IS 12254 Latest true true, false STYLE AND END USER End User Men Men 1/3 Boot Style Ankle Ankle Leg Height of Boot (mm) 60 - No. of Eyelets at each face ( in case of Ankle Boot) 8 - Colour Colour Black - Test Report Availability of Test Reports from Central Govt./NABL/IL AC acredited Lab to prove conformity to the standard Yes - Test reports to be furnished to buyer on demand yes - Test Report No 190318 - Address of the Lab A-2/103, SITE-V, UPSIDC INDUSTRIAL AREA, KASNA, GREATER NOIDA (U.P.) - Name of the Lab SHREE RAM TESTING LABORATORIES - Test Report Date 22-03-2018 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Md Sabir 700088, Indian Maritime University - Kolkata Campus P-19, Taratala Road 498 15

SPECIAL TYPE LEATHER HAND GLOVES TO DLW SPECIFICATION NO.MP/SAFETY/SPECN/ PPE/1 [ED-7] VALID FROM 26.12.2011. EXCEPT PARA 2.1 REGARD ING LENGTH.THEREQUIRE D LENGTH OF LEATHER HAND GLOVES SHALL BE400

Supply of Waste Bin for the Household 10 L Waste Bin for the Institutions and Shop10 L Waste Bin for the Market 100 L Sanitary Napkin Incinerator Sieve Machine Hand Cart Mechanized chopping machine Electrification Safety Equipment PMBSY Tools and acc

CUT RESISTANT HAND GLOVES CONFIRMING TO DLW SPECIFICATION MP/SAFETY/SPEC./PPE/24 (REVISION -12) DTD. 31.07.2014( Warranty Period : Upto 30 months from the date of supply) Firm offer: same as above. Ma

Work services required in safety equipment section Addl Altrn to Bldg No P25 at AF Camp Jaffarpore Provision of External electric supply and allied works for runway near Lima III and IV Provn of work services at ATC and COO office Cafeteria and demol

Refer Technical Specifications and BoQ.

Welders PPE kit set of four items as per Annexure - A. 1. Welding leather apron large - 01 no. 2. Welding leather hand sleeve -01 pair. 3. Heavy duty leather welding hand gloves 01 pair. 4. Welding le

PPE Set for Welders. Set consisting of 03 items: (1) Welding Aprons with EN ISO 11611:2015, Class 2A1; UKCA 2019 S1696 Schedule 35 Reg. 38 markings - 02 Nos. (2) Welding Leg Guards with CE, UKCA, EN

SAFETY JACKET, SAFETY BELT, COTTON HAND GLOVES, ELECTRICAL HAND GLOVES, LAGTHER HAND GLOVES, RETRO REFLECTIVE BOARD, ASPIRATOR, AIR SAMPLING BAG WITH SI PIPE

Supply Delivery of Personal Protection Equipment as enlisted at Administrative Building TCFHP WBSEDCL for Site Personnel under TCFHP

Water Dispenser, Quarter Plate, Full Plate, Spoon Set, Gum Boots, Radium Tape, Road Sign, Camp Stool, Portable Light, Electric Kettle 1 L, Mosquito racquets, LED Torch, Arc Mate, Small Heater, Moppers, Steam Iron, Pad Lock 45mm

Long Branch Gun Metal Nozzle 20 Mm, Dividing Breeching Type B Conforming To Type B Of BIS-5131, SCBA 6 Litres WC And 300 Bar Pressure EN137 Type 2, Safety Cone Traffic, Basket Strecher, Tripod With Rescue Winch And Fall Arrester, Hand Control Branch ... 5290, Safety Helmet White ... Body Safety Harness

Maintenance and refilling of laboratory safety equipment installed in 217 Water Testing Laboratories

Fire proof safety jacket with certifications of EN standards, Reflective harness 50mm with reflective tape pasted on the harness with lock, Safety Goggles with photo chronic glass, Safety Hand Gloves, Sal wood steaming rod 27mm by 38mm, Wooden coupling hard wood 75mm by 36mm, Wooden coupling hard wood 75mm by 32mm, Wooden Guide rope block hard wood 9 and half ft by 4ft by 2 and half inch, Wooden Guide rope block hard wood 9 ft by 4ft by 2 and half inch

Maintenance and refilling of laboratory safety equipment installed in 217 Water Testing Laboratories etc.

Full Body Safety Harness as per EN 361:2002 (PNG) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Experience Criteria, Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6513668 Dated : 06-08-2025 Bid Document 1/9 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 152999 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 15 (a)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : POWERGRID POWERGRID, ER-II CF-17, ACTION AREA-1C, NEW TOWN, KOLKATA-700156 (Powergrid Corporation Of India Limited) Splitting

Industrial Safety Helmet (V3) ISI marked to IS 2925 (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 2, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2026/B/7063164 Dated : 08-01-2026 Bid Document 1/6 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Reusable/Washable Cloth Face Mask (Q3), Industrial Safety Gloves - Leather and Cotton (Q3) MSE Exemption for Years of Experience and Turnover

Industrial Safety Helmet (V3) ISI marked to IS 2925 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 2, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6802727 Dated : 21-10-2025 Bid Document 1/6 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 425090.1 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Industrial Safety Helmet (V3) ISI marked to IS 2925 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Past Performance, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6943241 Dated : 09-12-2025 Bid Document 1/7 Number of Auto Extension count 2 Past Performance 20 % Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority Board of Officers Auto CRAC Days 20 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No