Loading
Loading…
Loading…
5,336 results • Best match
RIBBON FOR BARCODE PRINTER, BAR CODE LABEL FOR ROLLED COILS, BAR CODE LABEL FOR ROLLED SHEETS, DUMMY LINE 1, DUMMY LINE 2
Entry and Mid Level Desktop Computer (Q2), Line Interactive UPS with AVR (V2) (Q2), Multifunction Machine MFM (V2) (Q2), Computer Printer (V2) (Q2)
Entry and Mid Level Desktop Computer (Q2), Line Interactive UPS with AVR (V2) (Q2), Computer Printer (V2) (Q2), Scanner (V3) (Q2) (3 (3 ))
Annual Maintenance Service - Desktops, Laptops and Peripherals - Desktop PC; hp, Annual Maintenance Service - Desktops, Laptops and Peripherals - Printer (Monochrome, Laser, Composite Cartridge ); hp
Entry and Mid Level Desktop Computer (Q2), Line Interactive UPS with AVR (V2) (Q2), Computer Printer (V2) (Q2), Scanner (V3) (Q2) (3 (3 ))
smart card printer (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination ITC available to buyer Yes Type of Bid Two Packet Bid Bid Number ( ) : GEM/2024/B/5602285 Dated : 25-11-2024 Bid Document 1/11 Time allowed for Technical Clarifications during technical evaluation 4 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "
Register (V2) (Q4), Desk Pads - Writing (V2) (Q4), paper or eyelet punches (Q4), Ball Point Pens (V2) as per IS 3705 (Q4), Toner Cartridges/Ink Cartridges/Consumables for Printers (Q2), Staplers (V2) (Q3), Permanent Marker Pen (Q4), Gel Pen (V3) (Q4), Packaging Tape (Q4), Twine Thread (Q3), Paper weights (Q4), Pins, Paper, Straight as per IS 5653 (Q4), scissors (Q4), Black Lead Pencils (V2) as per IS 1375 (Q4), Needle Threader (Q4), Dak Pad (V2) (Q4), Glass Coasters (Q3), Desktop Calculator - Electronics (Q4)
OEM Ribbon Cartridge OEM Ribbon Cartridge ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Lipi As per GeM Catalogue. Ribbon Cartridge Model number 6800/6600 - ... of Printer for ... - Printer Model ...
OEM Cartridge OEM Cartridge ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Product Class OEM OEM Brand Brother Brother, Canon, HP, Koni kca Minolta, Kyocera, Le xmark, RICOH, Samsung, Panasonic, ... Cartridge Toner Ink, ... Ink, Toner , ... Ink/ Toner /Drum ... - Printer Model ...
OEM Cartridge Experience with Gov. Required 10 Year (s) OEM Cartridge ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Product Class OEM OEM Brand Samsung Brother, Canon, HP, Koni kca Minolta, Kyocera, ... Cartridge Toner Ink, ... Ink, Toner , ... Ink/ Toner /Drum ... - Printer Model ...
OEM Cartridge Experience with Gov. Required 10 Year (s) OEM Cartridge ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Product Class OEM OEM Brand Samsung Brother, Canon, HP, Koni kca Minolta, Kyocera, ... Cartridge Toner Ink, ... Ink, Toner , ... Ink/ Toner /Drum ... - Printer Model ...
OEM Cartridge OEM Cartridge ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Product Class OEM OEM Brand Brother Brother, Canon, HP, Koni kca Minolta, Kyocera, Le xmark, RICOH, Samsung, Panasonic, ... Cartridge Toner Ink, ... Ink, Toner , ... Ink/ Toner /Drum ... - Printer Model ...
OEM Cartridge OEM Cartridge ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Product Class OEM OEM Brand Samsung Brother, Canon, HP, Koni kca Minolta, Kyocera, Le xmark, RICOH, Samsung, Panasonic, ... Cartridge Toner Ink, ... Ink, Toner , ... Ink/ Toner /Drum ... - Printer Model ...
Repair and Overhauling Service - Uninterruptible power supply (UPS); POWER APPLICATION SYSTEM--POWER APPLICATION SYSTEM; No; Service Provider Premises, Repair and Overhauling Service - Computer Printers; Pantum; Yes; Service Provider Premises, Buyer Premises
All in One PC (V2) (Q2), Entry and Mid Level Desktop Computer (Q2), Computer Printer (V2) (Q2), Multifunction Machine MFM (V2) (Q2) (3 (3 ))
All in One PC (V2) (Q2), Line Interactive UPS with AVR (V2) (Q2), Multifunction Machine MFM (V2) (Q2), Computer Printer (V2) (Q2) (3 (3 ))
Multifunction Machine MFM (V2) (Q2), Computer Printer (V2) (Q2), Entry and Mid Level Laptop - Notebook (Q2), All in One PC (V2) (Q2) (3 (3 ))
Entry and Mid Level Desktop Computer (Q2) ( PAC Only ), Computer Printer (V2) (Q2) ( PAC Only ), Line Interactive UPS with AVR (V2) (Q2) ( PAC Only )
Computer Printer (V2) (Q2) MSE Relaxation for Years Of Experience Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 4 Bid Number : GEM/2025/B/7032895 Dated : 23-12-2025 Bid Document 1/10 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 606780 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 12136 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 4 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : MCL Basundhara Area Regional Stores, Materials Management, Basundhara Area, MCL, Dist-Sundargarh, PIN-770076 Odisha (Mcl Basundhara Area) 2/10
Repair and Overhauling Service - Camera for CCTV System (V2); Hikvision for CCTVs, Dell and HP for Computers, UPS, Cannon HP for Printer; Yes; Buyer Premises
Entry and Mid Level Laptop - Notebook (Q2), Multifunction Machine MFM (V2) (Q2), Entry and Mid Level Desktop Computer (Q2), Computer Printer (V2) (Q2) (3 (3 ))
Entry and Mid Level Desktop Computer (Q2), Computer Printer (V2) (Q2), Multifunction Machine MFM (V2) (Q2), Line Interactive UPS with AVR (V2) (Q2) ( ( 3 3 ))
Entry and Mid Level Desktop Computer (Q2), Multifunction Machine MFM (V2) (Q2), Line Interactive UPS with AVR (V2) (Q2), Computer Printer (V2) (Q2) (3 (3 ))
Entry and Mid Level Desktop Computer (Q2), Multifunction Machine MFM (V2) (Q2), Computer Printer (V2) (Q2), Entry and Mid Level Laptop - Notebook (Q2) (3 (3 ))
Entry and Mid Level Desktop Computer (Q2), Line Interactive UPS with AVR (V2) (Q2), Multifunction Machine MFM (V2) (Q2), Computer Printer (V2) (Q2) (3 (3 ))
Plain Copier Paper, Photocopier Paper with Printing, Stapler, stapler pin, Sketch Pen (Fibre Tip), plastic scale, scales (Steel scale), Correction pens- white fluid, scissors, Desktop trays or organizers, Paper weights, Ball Point Pen, tag fastener, Envelopes, Diaries-printed-plain- register, Diaries- printed-plain- register
75" INTERACTIVE PANEL (Q3), ALL IN ONE PC (2 UNITS) (Q3), ALL IN ONE PC (1 UNIT) (Q3), DESKTOP COMPUTER SYSTEM (10 UNITS) (Q3), MULTIFUNTIONAL COLOR PRINTER ( 1 UNIT) (Q3), MULTIFUNTIONAL MONO PRINTER ( 5 UNIT) (Q3), COMPUTER MONO PRINTER ( 9 UNITS) (Q3), WEB CAMERA ( 15 UNITS) (Q3), 3 KVA ONLINE UPS (1 UNIT) (Q3), LINE INTERACTIVE UPS ( 15 UNITS) (Q3), LINE INTERACTIVE UPS ( 5 UNITS) (Q3), VIDEO CONFERENCING CAMERA (1 UNIT) (Q3), SPEAKERPHONE ( 1 UNIT) (Q3), 2 KVA STABILIZER (4 UNITS) (Q3), ADDITIONAL IT CONSUMABLES AND ACCESSORIES (Q3)
Computer Printer (V2) (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled Yes RA Qualification Rule 50% Lowest Priced Technically Qualified Bidders Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days Bid Number ( ) : GEM/2025/B/5925586 Dated : 05-03-2025 Bid Document 1/8 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Estimated Bid Value 785400 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 15708 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 4 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : Staff Officer (MM), Talcher Area Talcher Area Mahanadi Coalfields Limited, Talcher Area OFFICE OF GENERAL MANAGER, TALCHER AREA, DERA, TALCHER ANUGUL, ODISHA, 759103 (Debasish Nayak) MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference 2/8 MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "
OEM Cartridge Experience with Gov. Required 10 Year (s) OEM Cartridge ( 60 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Product Class OEM OEM Brand Samsung Brother, Canon, HP, Koni kca Minolta, Kyocera, ... Cartridge Toner Ink, ... Ink, Toner , ... Ink/ Toner /Drum ... - Printer Model ...
Photocopier Paper with Printing Photocopier Paper With Printing ( 1205 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification "Conforming to Indian Standard IS 14490 : latest Yes * ISI Marking Yes * Indicate BIS Licence number Yes * CM/L Number 9800035414 * Test Report Details Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification No * Test Report to be Submitted to the Buyer on demand Yes * Test Report Number NA * Test Report Date NA * Name of the Lab NA * Address of the Lab NA * 1/5 Type and Colour Printing of logo single colour * Details of printing NA * Watermark logo No * Details of logo NA * Colour, size and location of logo will be specified in purchased order Yes * General Requirements The plain copier paper shall be devoid of pinholes The surface shall be well calendered, quite smooth and free from fluff or loose flbres Surface sizing with starch is desirable for avoiding fluff Yes * The paper shall have good dimensional stability, thermal stability and shall not have any static charge Yes * Moisture contained (in percent) 5 * The paper shall not have the degree of Curl more than 5(mm) Yes * Brightness, percent, Min 80 * Opacity, Min 85 * One minute cobb test, g/m2, Max 25 * Surface strength, Dennison(Wax Pick) No pick on 12 A * Smoothness for both sides (Bendsten), ml/min 180 * Ash content, percent by mass, Max 16 * Taber stiffness, Min a) Machine direction (MD) 2 * Taber stiffness, Min b) Cross direction (CD) 1 * Tear Index, mN m2/g, Mitt 4.5 * "Tensile index, Nm/g, Min a) MD " 40 * 2/5 "Tensile index, Min b) CD" 25 * Size and GSM Size of paper A4 * Grammage (GSM)(g/m2) 75 75 Packing Number of sheets in a pack (Nos) 500 * Net weight per pack (kg) 500 Any applicable numeric value Paper in reams shall be securely packed with one layer of wrapping paper/duplex board of min 200 GSM or two layers of wrapping paper of 100 gsm(min) each The reams inside the carton shall be covered with LDPE film of 1 x 10^-2 mm thick (min) Finally 10/5 reams shall be packed in carton of 5 ply construction suitable for safe rail/road transit These carton shall be of double wall construction generally conforming to IS: 2771 (part I) 1990 with amdt no 1 & 2 and style 0620 of IS: 6481:1971 The weight of carton shall not exceed 40 kgs (approx) The carton shall be closed with the gum paper tape 50 mm (min) wide & finally secured by nylon strapping of size 13 mm wide 2 Nos on each side The edges of the nylon strap shall be heat sealed overlapping each other by min 25 mm Yes * If any other type please specify details NA * For EC0 Mark, the product shall be packed in such packages which shall be recyclable reuseable or Yes * 3/5 biodegradable Marking The package shall be marked with Description and size of the paper Yes * Thickness in microns and substance in g/m2 Yes * Quantity Yes * Lot Number and month and year of manufacture Yes * Indication of the source of manufacture Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ovais Ahmed. R 770076, Mahanadi Coalfields Limited, At & Po- Basundhara, Sundargarh, Basundhara-770076 1205 15
Entry and Mid Level Desktop Computer (Q2), Line Interactive UPS with AVR (V2) (Q2), Computer Printer (V2) (Q2), Multifunction Machine MFM (V2) (Q2), Scanner (V2) (Q2)
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 1205 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 Physical Characteristics Brightness in % 80 Tensile Index MD in Nm/g 40 - Tensile Index CD in Nm/g 25 - Opacity in % 85 - Tear Index (Avg) in Nm.m²/g 4.5 - Smoothness for both sides (Bendtsen) in ml/min 200 - 1/2 Thickness in µm 95 - Moisture in % 4 - Stiffness MD 2 - Stiffness CD 1 - Surface Strength Dennison (Wax Pick) >= 12 A 12A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ovais Ahmed R 770076, Mahanadi Coalfields Limited, At & Po- Basundhara, Sundargarh, Basundhara-770076 1205 15
Computer Printer (V2) (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Bid Number ( ) : GEM/2025/B/6017437 Dated : 05-03-2025 Bid Document 1/12 Time allowed for Technical Clarifications during technical evaluation 7 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Financial Document Required Yes Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 18053 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 38 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : MAHANADI COALFIELDS LIMITED, HINGULA AREA Name of Bank: STATE BANK OF INDIA, Bank Branch Name: HINGULA AREA, MAHENDRAPUR Bank Account No.: 11094460922 Beneficiary Bank Branch IFSC: SBIN0012068 Beneficiary Address: MAHANADI COALFIELDS LIMITED, HINGULA AREA, BALARAM TOWNSHIP, PO- NEHRU SATABDI NAGAR, BHARATPUR, DIST-ANGUL, ODISHA, 759148 (Mahanadi Coalfields Limited, Hingula Area) MII Purchase Preference 2/12 MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "
Computer Printer (V2) (Q2) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6403998 Dated : 21-07-2025 Bid Document 1/9 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 864500 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 17300 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 3 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : MAHANADI COALFIELDS Office of the Chief General Manager Material Management Department Lakhanpur Area MCL, At Post Bandhabahal - 768211, District Jharsuguda Odisha. (Mahanadi Coalfields Limited, Lakhanpur Area) 2/9 Splitting
Computer Printer (V2) (Q2) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6691551 Dated : 25-09-2025 Bid Document 1/21 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 1134000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank ICICI EMD Amount 22700 ePBG Detail Advisory Bank ICICI (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 5 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : Mahanadi Coalfields Limited, Lingaraj Area OFFICE OF THE GENERAL MANAGER, MAHANADI COALFIELDS LIMITED, LINGARAJ AREA, PO-DEULBARA COLLIERY, TACLHER, DIST-ANGUL, ODISHA-759102 2/21 (Staff Officer Mm, Lingaraj Area) UIN Number NCTGC2415P
Scanner (V3) (Q2), Entry and Mid Level Desktop Computer (Q2), Multifunction Machine MFM (V2) (Q2), Line Interactive UPS with AVR (V2) (Q2), Computer Printer (V2) (Q2) (3 (3 ))
All-in-one Desktop PC, LAPTOP COMPUTER-Part No 6Q261AV, Wireless Mouse-Part No- 7M1D4AA, HP USB-C 7- in-1 Hub, COLOUR LASER PRINTER-Part No 5HH65A
Annual Maintenance Service - Desktops, Laptops and Peripherals - Desktop PC; Dell, Laptops and Peripherals - Printer (Monochrome, Laser, Composite Cartridge ); hp, Laptops and Peripherals - UPS (Offline 600-650 VA); APC
Annual Maintenance Service - Desktops, Laptops and Peripherals - Desktop PC; Acer, Laptops and Peripherals - ECLASS; NEW VISION, Laptops and Peripherals - LAN NETWORK; D LINK, Laptops and Peripherals - PRINTER; HP
dot matrix printers (Q2) ( PAC Only ) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number : GEM/2025/B/6295160 Dated : 07-06-2025 Bid Document EMD Detail 1/6 Required No ePBG Detail Required No Splitting
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes * Test Method as per IS: 1060 Yes * Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 94 94 Tensile Index MD in Nm/g 44 * Tensile Index CD in Nm/g 27 * Opacity in % 92 * Tear Index (Avg) in 4.8 * 1/3 Nm.m²/g Smoothness for both sides (Bendtsen) in ml/min 300 * Thickness in µm 98 * Moisture in % 4.5 * Stiffness MD 2.5 * Stiffness CD 1.5 * Surface Strength Dennison (Wax Pick) >= 12 A 12A * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Akshaya Kumar Jena 751013, NALCO BHAWAN, P-1, NAYAPALLI, BHUBANESWAR 500 20
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 650 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 Physical Characteristics Brightness in % 80 Tensile Index MD in Nm/g 40 - Tensile Index CD in Nm/g 25 - Opacity in % 88 - Tear Index (Avg) in Nm.m²/g 4.5 - Smoothness for both sides (Bendtsen) in ml/min 200 - 1/3 Thickness in µm 95 - Moisture in % 4 - Stiffness MD 2 - Stiffness CD 1 - Surface Strength Dennison (Wax Pick) >= 12 A 12 A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sankar Kumar Maity 751013, CENTRAL MINE PLANNING AND DESIGN INSTITUTE LIMITED REGIONAL INSTITUTE VII, PLOT NO E4 NEAR GANDHI PARK SAMANTAPURI PO RRL BHUBANESWAR 751013 650 15 EMD Required No ePBG Required No
Entry and Mid Level Desktop Computer (Q2), Computer Printer (V2) (Q2), Scanner (V2) (Q2), Line Interactive UPS with AVR (V2) (Q2) MSE Exemption for Years of Experience and Turnover
Entry and Mid Level Desktop Computer (Q2) ( PAC Only ), Multifunction Machine MFM (V2) (Q2) ( PAC Only ), Computer Printer (V2) (Q2) ( PAC Only ), Scanner (V2) (Q2) ( PAC Only ) (3 (3 ))
All in One PC (V2) (Q2), Multifunction Machine MFM (V2) (Q2), Computer Printer (V2) (Q2), High End Laptop - Notebook (Q2), Entry and Mid Level Desktop Computer (Q2) (3 (3 ))
DESKTOP COMPUTER, LAPTOP NOTE BOOK, UPS, PRINTER, TELEVISION, INFORMANTION KIOSKS, GENERATOR, INTRACTIVE BOARD, SPILT AC, AUDIO SYSTEM, WATER COOLER, DSLR CAMERA, CCTV, REVOLVING CHAIR, CHAIR, MODULAR WORK STATION, BOOK SELF
Computer Printer (V2) (Q2) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2026/B/7061112 Dated : 12-01-2026 Bid Document 1/8 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 76068 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 350 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes * Test Method as per IS: 1060 Yes * Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 94 80-95 Tensile Index MD in Nm/g 43.5 * Tensile Index CD in Nm/g 35 * Opacity in % 92 * 1/3 Tear Index (Avg) in Nm.m²/g 6.54 * Smoothness for both sides (Bendtsen) in ml/min 285 * Thickness in µm 103 * Moisture in % 4.5 * Stiffness MD 3 * Stiffness CD 2 * Surface Strength Dennison (Wax Pick) >= 12 A 14 A * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sankar Kumar Maity 751013, CENTRAL MINE PLANNING AND DESIGN INSTITUTE LIMITED REGIONAL INSTITUTE VII, PLOT NO E4 NEAR GANDHI PARK SAMANTAPURI PO RRL BHUBANESWAR 751013 350 15
A4 paper copier 75 GSM, A3 Paper Copier 75 GSM, A4 Paper Copier 100 GSM, A4 Photo Paper 254 GSM, Art Sheet 220 GSM, Fevicol, Stapler Pin Small 23x6, Cartridge for SHARP BP50C31 Colour Printer Cyan Magenta Yellow and Black, Cart for SHARP BP50M55 ... White Printer , ...
Projector Screen (V2) (Q3), High End Desktop Computer (Q2), Multimedia Projector (MMP) (Q2), Multifunction Machine MFM (V2) (Q2), Computer Printer (V2) (Q2), Line Interactive UPS with AVR (V2) (Q2) (3 (3 ))