Railway Tenders in West Bengal

Railway carriage fan 225mm sweep wall bracket type 110V DC as per IS 6680-1992 with RDSO Annexure-H (2005) with crashworthy features as per RCF Amendment-4 with corrigendum-4 (Type V) and as specified

Inter lock washer for size M20 for Traction link and Pivot Housing bolts, as per S.C. Railway Drawing No.C/ELS/ LGD/FSTR/4/5 in pair with glued with non-permanent glue. Paired Washer thickness 6.2mm.

Wheel/Tyre Defect Gauge for BG Coaches as per Railway Boards approved IRCA Part IV, Rule 2.8.4 and Plate 38, made of 3 mm thick hard alloy steel plate, used for inspection of Condemn Flange Thickness,

FRP BLADE FOR 110 V AC/DC 450 mm RC FAN OF INDIAN RAILWAY AS PER RDSO-/PE/SK/TL/0123-2009 (REV-0) as per Specn. RDSO/PE/SK/TL/0 Accepted make /Brand :JE

Rail jumpers extension With clamps at one ends 16 sq.mm copper cable 14 mtrs. Long as per Drg. No. POWER/584 approved by Indian Railway. Copy of the drawing along with test certificate by govt. appro

Bracket for Clamp (Height 55 mm) TO S.E. Railway Drawing. No. KGP / 1964, Alt. 2, Item No. 1. Material and Specification: IS: 2062 / 2011, Amnd. 1/ Nov. 2012, Gr. E50C. Firm's Offer Make/Brand:- OWN M

Gold Plated Silver Medal with silver purity 990.00 as per IS 2112:2014 embossed with I.R. logo on one side and Central Railway logo on the other side as per specification (copy enclosed). The medal sh

Supply and installation of Battery charger for Railway S&T Installation floor mounting with 110 V AC single phase input and 24V DC output 15A as per spec. IRS S-86/2000 with latest amendments.%u201D

Paint enamel synthetic exterior finishing Signal Red ISC No. 537 as per IS: 5/07 for Railway coaches to IS:8662/2004 as RDSO amendment no. IA (Rev.l) as an additional requirement with RDSO Amndt. No.

" 1" x 24" hose coupling type UIC with 1" straight nipple for WAG-7 locomotives as per CLW Drg. No. 0/3/65/66 Alt. 11. or KYN/Central Railway Drg. No. TC2GN-4 Alt-R4

PAPER WHITE WATER MARK (Running water mark specification- 02 inch diameter with 17 stars and should be visible) WITH INDIAN RAILWAY LOGO IN REELS, 58 GSM, IS:1848/2018. Reel Width 43 cms. The paper is

Inj. Tetanus Toxoid PTAP Alum adsorbed 0.5 ml Amp. Product should be available in the approved product list of Railway Board.Firm%u2019s offer; Brand as accepted: BETT 0.5 ML AMP. Mfgd and Mktd By M/S

GEAR CASE JOINT BOLT AND NUT SQUARE HEAD ( IN SETS ) SIZE M 30 X 110 MM AS PER SOUTHERN RAILWAY CAR SHED/AVD DRG NO.M/TRS/BG/EMU/134 ALT-2. MAKE/BRAND: FIRMS OFFER-self

PAINT ENAMEL SYNTHETIC EXTERIOR UNDER COATING FOR RAILWAY COACHES PALE CREAM( ISC: 352 OF IS: 5/94) TO IS:-8662/2004 (2ND REVISION) WITH RDSO AMENDMENT NO.1 (REV-0) FOR PIGMENT CONTENT AS AN ADDITIONA

Supply of hand operated drill machine for Drilling Bond Wire Holse of size 9/32 inch in Railway Track suitable for 52 kg or 60 kg. Make MDEW/Chamunda/Chandra/Maa Durga. Accepted Make/Brand: CHANDRA

Dropper making Jig and wire straightener suitable for 5mm dropper wire as per enclosed drawing No. IM/DMG/05/12/102. ( Ref : RE/DNR Drg.No.RE/DNR/EL/TP/08) Firm offer/Make:AS PER RAILWAY APPROVED DRG.

CONTROLLER [PCB] CARD FOR 110V DC BLDC RAILWAY CARRIAGE FAN OF 400 MM SWEEP , CONFIRMING TO RDSO SPECIFICATION NO. RDSO/ PE/SPEC/ TL /0021- 2005 [REV - 3] WITH AMENDMENT NO 1. ONLY OFFERS FROM RDSO AP

Cover file size: 342 mm x 262 mm, %B1 5 mm in six different colours with 06 (six) eyelets, cotton lash both end metal strip ,cotton strip pasted inside and Railway hologram , office name , Fax , Phone

Rail jumpers with 16 Sq.mm copper cable with both end clamps. 03 mtrs long.(Firm accepted offer Rail jumpers with 16 Sq.mm copper cable with both end clamps. 03 mtrs long. and as per Railway approved

38 mm Special Type Dresser Gasket. As per Howrah Diesel Shed Sketch No.590/02/2022/HWH. Make: HCM or similar. Accepted Make/Brand:- HCM (HSN Code : 8607 [Parts of Railway or Tramway Locomotives or Rol

400 MM SWEEP SENSORLESS BRUSH LESS DC RAILWAY CARRIAGE FAN AS PER RDSO SPEC NO-RDSO SPEC/TL0021-2005(REV-3) OR LATEST WITH SS GUARD SWIVEL TYPE MAKE RDSO OR ICF APPROVED SOURCES. Make: Self.

Silver Medal with clevis weight -20 gms. purity of silver of 94% (+/-1%) Diameter of medal - 3.5cm gold plating with logo of BLW one side and other side Indian Railway Logo. make - firm is OEM itself

Come along clamp for aluminium spider conductor dia 20mm (03 bolt type) as per Drg. No. Power/4572 dully approved by Indian Railway. Make/Brand-PEC OR SIMILAR & DRG No. POWER/4572 or latest. Make:- PE

Gold Plated Silver Medal with silver purity 990.00 as per IS 2112:2014 embossed with I.R. logo on one side and Central Railway logo on the other side as per specification (copy enclosed). The medal sh

Full Gloss Polyurethane Enamel (Two Pack) for the Exterior Finishing Paint of Railway coaches conforming to RDSO Spec.no.M&C/PCN/100/2018 Chapter-V, M&C/PCN/100/2018 with Amendment 1B(REV 2.0),STR:M&C

SHIM FOR CBC COACHES,SIZE- 4 MM PLATE THICKNESS. DRAWING NO. S.E. RAILWAY CWM SK.NO. 4519, ALT. NIL [ J & T DRG. OFFICE/KGPW]. MATERIAL AND SPECIFICATION: IS: 2062/2011 WITH AMEND.1 / NOV. 2012, GR. E

Hand operated track drilling machine for drilling bend wire size 9/32 inches. in railway track suitable for 52 kgs & 60 kgs rail. Make/Brand Hand CYCLE TYPE DRILL MACHINE or similar. Make:-OWN or simi

Brushless sensor less DC Railway Carriage fans, 110V DC, voltage range 90-140V DC, fixed type 400mm sweep conforming to RDSO Specification No: RDSO/PE/SPEC/TL/0021/2005(Rev.-3)with Amdt. No.1. (Acce

Paint Enamel Synthetic Exterior Finishing for Railway Coaches Navy Blue (ISC:106 of IS:5/2007 to IS:8662/2004 (2nd.rev.) with RDSO,s Amendment No. 1 Rev. 0 for pigment content as an additional requir

PAINT ENAMEL SYNTHETIC EXTERIOR FINISHING SIGNAL RED (SHED NO. 537 OF IS: 5/2007) TO RAILWAY COACHES TO 8662/2004( 2nd Rev) (Reaffirmed 2019) with RDSO Amendment No.1 (Rev.0) for pigment content as an

Railway carriage fan bracket type 225 mm Sweep 110 V AC conforming to type IV of ICF Annexure - I to IS; 6680 - 1992 (First Revision) with deviations as per Annexure - H (2005) FIRM'S OFFER : AS ABOVE

Gold Plated Silver Medal with silver purity 990.00 as per IS 2112:2014 embossed with I.R. logo on one side and Central Railway logo on the other side as per specification (copy enclosed). The medal sh

Carbon Brush suitable for ELGI make Main Compressor DC motor. (as per Southern Railway DRG No .M/TRS/BG/EMU-242-ALT.1. Grade Offered E55(I) ) KW = 11.38, RPM = 1450, Volts = 132, Frame.No160EMU/MC N

U CLAMP (SS) FOR SBR ELEMENTS OF AC RAKES OF KOLKATA METRO AS PER METRO RAILWAY S DRAWING NO. MR/POH/AC/7-5-068. as per Drg.No. drawing no.MR/POH/AC/7-5-068. MAKE:SELF

Full Gloss Polyurethane Enamel (Two Pack) for the Exterior Finishing Paint of Railway coaches conforming to RDSO Spec.no.M&C/PCN/100/2018, Chapter - V, Colour Shade Lemon to ISC No.355 of IS 5:2007 wi

Natural fibre thermoset composite sheets for roof panelling of Railway Passenger coaches size:-3048 x 1525 x 1.5 mm thick as per RDSO'S specn. no.C-K511,of Oct.2005 with amendment slip no.2 of January

Gold Plated Silver Medal with silver purity 990.00 as per IS 2112:2014 embossed with I.R. logo on one side and Western Railway logo on the other side as per specification (copy enclosed). The medal s

RAILWAY CARRIAGE FAN 140V AC 50 HZ FIXED TYPE 450MM SWEEP WITH CRASH WORTHY FAN GUARD WITHOUT REGULATOR CONFORMING TO RDSO'S SPECN. NO. RDSO/PE/SPEC/TL/0050 (REV.-1)-2010 OR LATEST WITH ALL AMENDMENTS

Set of Hinge complete for LHB coaches consisting of 5 items as follow:- (i) Hinge complete to Indian Railway Drg. No.3 10113.0.21.420.101 Alt. No.- 'B'. Qty/Kit- 9 nos. (ii) Hinge complete to Indian R

Handmade wooden Clock Memento in a shield shape design and made with Burma teak wood UV printed logo of EAST INDIAN RAILWAY and finished with wax polish with protection layer. And packed in a paper bo

Supply of non-metallic FRP junction type route indicator 1 WAY AS PER RDSO DRG. NO SA-23401 (ADV)/ ALT.2 for Railway Signalling suitable for RE Area without lamp, Lenses, signal transformer as per RDS

Supply of non-metallic FRP junction type route indicator 2 WAY AS PER RDSO DRG. NO. SA-23402 (ADV)/ ALT.2 for Railway Signalling suitable for RE Area without lamp, Lenses, signal transformer as per RD

Railway Carriage Fan 140 V, AC, 450mm sweep to IS:6680-92, FRP blade Crash worthy design of fan guard etc., as per RDSO Specification No. RDSO/PE/SPEC/TL/0050-2010 [REV-1] or latest.

5 KVA, 25KV/240V, 50 HZ SINGLE PHASE OIL FILLED L.T. SUPPLY AUXILIARY TRANSFORMER FOR RAILWAY AC TRACTION SYSTEM AS PER RDSO SPEC. NO.ETI/PSI/15 (08/2003) OR LATEST. MAKE/BRAND: M/.s ARU TRANSFORMERS/

Printed circuit board for 110 V ,450 mm sweep (BLDC) Universal Brushless AC/DC railway carriage fan confirming to RDSO specification no:RDSO/PE/SPEC/TL/0021/2005 (rev-3) with Amnt no.1.The PCB shall

Railway carriage fan, 110V DC, wall bracket type, 225 mm sweep conforming to IS: 6680-1992 with annexure 'H' of Dec'2005 (Except the provision of optional clause 20 of annexure 'H' of Dec'2005). MAKE-

: Fail safe Electronic Flasher device for Railway signalling with plug board, relating clip and connector as per RDSO Spec. No. RDSO/SPN/173/2002, Amdt.2 or latest BRS-930, IRS:S-23 & IRS:S-34 as appl

Portable Hand Track Drill Machine fully Hand drive for track circuit bonding etc in Railway Track Suitable for 52 kg or 60 kg. Specification as per Drawing No. MDEW/SA-29 attached. Make: Bell or simil

Wheel Balancing Weight for LHB Fiat Bogies to Indian Railway Standard's DRG No. ICF/SK3-0-2-012. Item (1.) Size (15X15X30)mm, Qty.-04Nos. Item (2.) Size (15X15X45)mm, Qty.-04Nos. Item (3.) Size ( 15X1

Railway Carriage fan fixed type 300 mm sweep operated at 110 V AC supply conforming to Type. I of ICF annexure 1 to IS: 6680-1992 with RDSO annexure-'H' of Dec.2005. Make: SPJ NOVA