Inspection, Testing & Audit Tenders in Chhattisgarh

M. S. Hexagonal Nut Size¾ ” (20mm), BSW thread 10 TPI 30mm long

Custom Bid for Services - Performing of Non-Destructive Test of DAV Public School Korba at Korba Area (Retender) Similar Category Facility Management Services - LumpSum Based Selection of Laboratories for Testing of Products/Material Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

Custom Bid for Services - 200142965 TRI ANNUAL CALIBRATION CONTRACT FOR LAB INSTRUMENTS EQUIPMENTS OF CHEMISTRY DEPARTMENT NTPC LARA Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - 200153651 PR for Calibration of Electrical Testing Instruments at NTPC Sipat for 2 years Similar Category Operation and Maintenance Power House/Power Plant

5KV Digital Insulation Tester as per Specification in Annexure enclosed. Makes: MEGGER, METRAVI, METREL, MOTWANE, MECO, KYORITSU only. NOTE: Test and Calibration certificate should submit along with

Custom Bid for Services - Relay Calibration Similar Category Repair and Overhauling Service Operation and Maintenance Power House/Power Plant Operation and Maintenance Of Electrical Systems/Electrical Installations

Transformer Oil Test, Battery Capacity Test, VLF Testing of HT Cables, Tan Delta Testing of HT Cable, PD Testing of HT Cable, IR PI Testing of HT Cable, Ammeter Voltmeter Calibration, Energy Meter Calibration, IR Testing of LT Cables, IR Testing of ... OTI Calibration Testing, ... WTI Calibration Testing, ... Electrical Safety Audit , ... Equipment Calibration , ...

Maintenance, Calibration, testing and checking of CG power and Industrial Solutions Limited, Make-145KV GCB (SF6) and 33 KV VCB installed at 132 KV Central substation Kusmunda Area

Custom Bid for Services - Comprehensive Annual Maintenance Contract CAMC with Calibration of Double Beam UV Spectrophotometer of Environment Laboratory CMPDI RIV Bilaspur for 01 year on OEM basis

Side Body Straigtnner as per WRS Drawing S.E.C. RLY./SK.No.WRS/R-1590.Material and specification as per Drawing. with test and calibration certificate from Govt./NABL approved laboratory.

Testing, calibration and rectification of 1000 Kg standard CI test weights through Chhattisgarh state government licence holder as per the scope of work provided in the bid document.

Custom Bid for Services - 200152588 Job contract for Calibration of Lab Equipments of NTPC Korba FQA Lab for two years Similar Category Operation and Maintenance Power House/Power Plant

Infrared Thermometer (Video infrared thermometer) with data logging as per attached Annexure I. Note Material to be delivered with calibration certificate for Temperature. Make- Metravi or Fluke Or TI

TORQUE WRENCH 10-50 Ft.Lb/10-70 Nm, 1/2 INCH SQUARE DRIVE, RATCHET TYPE.MAKE:- TAPARIA, MAC MASTER, GEDORENote:- The firm shall submit calibration certificate while supplying the item.

TORQUE WRENCH 20-100 Ft.Lb/25-135 Nm, 1/2 INCH SQUARE DRIVE, RATCHET TYPE.MAKE:- TAPARIA, MAC MASTER, GEDORENote:- The firm shall submit calibration certificate while supplying the item.

REAGENT PACK FOR HDC-LYTE, PACK SIZE: 1080 ML, DAILY CLEANER FOR HDC-LYTE, PACK (6x15 ML), QUALITY CONTROL FOR HDC- LYTE

Custom Bid for Services - Testing and Calibration of 33KV and 3300 V equipments at Rajgamar Sub Area Similar Category Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

Maintenance, Calibration, testing and checking of Crompton Greaves power and Industrial Solutions Limited make 145KV GCB and 36 KV VCB installed at 132/33 KV Central substation under Kusmunda Area

5 KV Diagnostic insulation tester with 3x3 test leads for earth, guard & line connection 1.5 Meters AC mains chord, Main protected fuse, Calibration certificate, Three programmable timers, modes for c

Custom Bid for Services - Name of Work: CALIBRATION OF STANDARD INSTRUMENTS OF C&I LAB PP-II AND PP-III Bhilai Similar Category Operation and Maintenance Power House/Power Plant

HDC LYTE REAGENT PACK; PACK SIZE: 1080ML (Q3), DAILY CLEANER FOR HDC LYTE; PACK SIZE: 6x15ML (Q3), QUALITY CONTROL FOR HDC LYTE (Q3)

Customized AMC/CMC for Pre-owned Products - Annual maintenance contract for calibration of Draeger make 12 nos Multi-gas detector with single sensor (CH4), MP Enterprises make 04 nos Methanometer cum toximeter for 02 years (08 Quarters) of various mi..

SUPPLY OF DIGITAL MULTIMETER WITH CABLE SET, SPARE FUSE, SAFETY COVER WITH BELT,BATTERY, USER MANUAL,ALL ACCESSORIES WITH VALID CALIBRATION CERTIFICATE.4 3 / 4 DIGITAL MULTIMETER TRUE RMS 31000 COUNTS

Rotating Vane type Anemometer with Range 0.4-30mtr/sec. and accuracy level of 0.1 M/sec (Resolution) along with calibration certificate with Traceability. Similar to Model No. AM4201 Make-Lutron. Firm

Custom Bid for Services - TESTING OF TRANSFORMER OIL WORK AT BIOM KIRANDUL COMPLEX DANTEWADA CG Similar Category Vulnerability and Penetration Testing Employee Skill Testing and Assessment Service Selection of Laboratories for Testing of ... Products/ Material Testing Service ...

REAGENT PACK FOR CKK LYTE; PACK SIZE: 1080ML (Q3), DAILY CLEANER FOR CKK LYTE; PACK SIZE: 12X15ML (Q3), QUALITY CONTROL FOR CKK LYTE (Q3)

CS 13, INST CONS TG O2 10Point3PPM N2 B 47L CS 13, INST CONS TG 31Point5percentageCOPlus31Point5percentageCO 10L CS 1, INST CONS TG 31Point5percentageCOPlus31Point5percentageCO 10L CS 13, INST CONS TG 31Point5percentageCO2Plus31Point5percentageC 10L CS 13, INST CONS TG 9percentageH2 REST N2 10L CS 13, INST CONS TG 0Point9 percentage O2 REST N 10L CS 13, INST CONS TG 8percentage O2 REST N2 10L CS 13, INST CONS TG 4500 PPM CO RES 10L CS 13, INST CONS TG 3600 PPM COPlus11Point 10L CS 13, INST CONS TG 45percentage O2 and REST N 10L CS 13, INST CONS TG 1800 PPM SOXPlus36 10L AL 13, INST CONS TG CH4 3 Point 18 percentage Plus H2 10L CS 13, INST CONS TG 1Point8percentage CO and REST 10L CS 13, INST CONS TG PURE N2 99 Point 999 47L CS 13, INST CONS TG 0Point4percentage O2 REST N2 10 CS 13, INST CONS TG O2 21percentageCO 2000P 10L CS 13, INST CONS TG SO2 406 PPM CO2 10L CS 13, INST CONS TG SO2 257 PPM CO 10L AL 13, INST CONS TG SO2 413 PPM CO 10L AL 13, INST CONS TG SO2 252 PPM CO 10L AL 13, INST CONS TG N2 99Point9997percentage 50L CS 20, INST CONS TG NO 125 PPMSO2 10L AL 13, INST CONS TG NO 275 PPM SO2 10L AL 13, INST CONS TG NO 450 PPMSO2 10L AL 13, INST CONS TG CH4 8percentageCO2 10Point0 10L CS 13, INST CONS TG O2 0Point5percentageN2 BALA 10L CS 13, INST CONS TG 2percentage COPlusBALANCE N 10L AL 13, INST CONS TG 8percentage CO2PlusBALANCE 10L AL 13, INST CONS TG 16percentageO2PlusBALANCE N 10L CS 13, INST CONS TG 640MG NM3 SO2PlusB 10L CS 13, INST CONS TG 400MG NM3 NOPlusBA 10L CS 13, INST CONS TG O2 10Point51percentage BALA 10L CS 13, INST CONS TG H2S 525 PPM N2 10L CS 13

Custom Bid for Services - Combined Calibration contract of Lab equipments (Chemistry deptt PP-3 and PP-2) for a period of two years Similar Category Operation and Maintenance Power House/Power Plant

Digital Anemometer Hot wire type with OEM calibration certificate. Operating range -0.1 to 25 M/S LCD Display,Display digit-3.5 Operating Temperature- 0 to 50 Degree centigrade, Resolution0.01 M/S and

ROTATING VANE TYPE ANEMOMETER WITH RANGE 0.4 - 30 MTS/SEC AND ACCURACY LEVEL OF 0.1 M/SEC (RESOLUTION) ALONG WITH MANUFACTURERS TEST CERTIFICATE AND STATEMENT OF CALIBRATION. MODEL NO. : AM 4201, MAKE

Ratchet Type Torque Wrench of Range 25-135 NM with 1/2" sq.drive as per Gem Product ID: 5116877-95511076001. Note: Material to be supplied with calibration certificate and warranty certificate. Make:

Digital Ultrasonic testing equipment for welded rail joints with coloured LCD TFT screen, trigonometrical function and A-Scan storage along with data setup as per RDSO specification no. RDSO/M&C/NDT/129/2005 Rev-II, August 2014 with AT & FB weld test piece for smooth USFD testing of Railway Track.

Digital Ultrasonic testing equipment for welded rail joints with coloured LCD TFT screen, trigonometrical function and A-Scan storage along with data setup as per RDSO specification no. RDSO/M&C/NDT/129/2005 Rev-II, August 2014 with AT & FB weld test piece for smooth USFD testing of Railway Track.

Structural Stability and Non- Destructive Test (NDT) on HEMMs working at Manikpur OCM, Korba Area.

Providing and fixing with complete installation, calibration, testing and commissioning of OTI and WTI in power Transformers of Ghurdewa Substation and Balgi Substation for DGMS Compliance at SRK-BLG Sub Area, Korba Area.

Supply, installation, commissioning of 04 nos. tamper proof Electromagnetic Digital Water flow meter with inbuilt Telemetry devices including annual calibration, cabin for protection, CAMC for a period of three years at Dipka Expansion Project.

Supply & commissioning of microprocessor based time delay relay test unit of m/s. Slazer Electronics or Equivalent model as per technical specification enclosed. Item to be supplied along with calibration certificate and warranty certificate.

Custom Bid for Services - AMC for maintenance and calibration of Beltscale make PEL PBL located at different locations of OCSL Plant Dep 5 10 and11A Similar Category Customized AMC/CMC for Pre-owned Products

Air Quality Index Display Digit Size 0.56 inch Time & Date Calibration mode with IR Remote Input power 220V to 230V AC useable for Indoor purpose parameter Temp. Humidity, pm 2.5 Co/Co2. Make- AZMATIO

PRESSURE GAUGE SPECIFICATION:- MS BODY 3/8" BSP DIAL SIZE 4" THREADED BOTTOM FITTED RANGE 0 TO 40 KG/CM2 L.C. 1KG/CM2. ACCURACY PLUS-MINUS 1% WITH CALIBRATION CERTIFICATE. MAKE:-H.GURU, FIEBIG or Simi

Automatic Burette, Glasswares Burette Pipette Volumetric flask Measuring cylinder etc, Hot Air Oven digital thermal indicator, Glass Thermometer Incubator, Hot Plate Analog thermal indicator, Muffle Furnace Digital Temp controller, Analytical Digital Balances, Weight box, Loose Weight, pH Analyzer Digital Display, De Mineralized Water unit Digital Conductivity Meter, Compressor for ICP Instrument Pressure gauge and Switch, Argon Gas Regulators Pressure gauge and switch, Reactor Block Digital Temperature Controller

M. S. Hexagonal Nut 1.5D, Size 3/4" (20mm) BWS Thread 10, TPI 30 mm long for use in roof bolt

Tyre Defect Gauge for BG wheel for high-speed train, RDSO Ref Plate no38 rule 2,8,4 of IRCA, Flatness50 mm, Thin Flange - 22mm, with calibration certificate, Make: PIE or Similar-warranty 30 months from the date of supply.

Custom Bid for Services - Supply Installation calibration and commissioning of 06 nos battery operated telemetry digital flow meter with 1 year warranty and 5 years CAMC for Gevra Project Similar Category Customized AMC/CMC for Pre-owned Products

Custom Bid for Services - Integration of IVTS equipments like GPS devices 820 nos Boom Barriers 32 nos and Weighbridge Centering System 106 nos along with complete accessories andtwo yearsof maintenance in different areas of SECL Similar Category ... Category Calibration Services

Providing, installation, calibration and testing of 01 no. NGR with fail safe relay for 1.6 MVA, 33 KV/3.3KV transformer installed at surface sub- station Rani Atari UG mine in Rani Atari Sub Area.(As per Annexure-A enclosed in NIT)

Calibration and maintenance of Drager make Gas sensor (Xam 5600 Xam 2500 for NO2 NO SO2 CO2 CH4 O2 H2S Co and Aldehyde sensors (quarterly basis) of different UG Mines and RRRT Baikunthpur Area Having Authorize firm from Drager safety AG

Testing and calibration of protective relays, ACBs and high voltage test of 3.3 KV equipment (TSU, ACB) from NABL approved lab for DGMS approval / permission of HT electrical shifting at Balgi mine under SRK-BLG Sub Area of Korba Area.

Custom Bid for Services - Annual Maintenance Contract for repairs maintenance calibration and stamping of 60T SPAN make electronic road weigh bridge no4 located at Akash Nagar area is under Mining department Deposit5 Similar Category Customized AMC/CMC for Pre-owned Products

REAGENT PACK FOR HDC LYTE PLUS (ABGEM) BLOOD GAS ANALYZER 1050ML (Q3), DAILY CLEANER FOR HDC LYTE PLUS ( ABGEM) BLOOD GAS ANALYZER 6X15ML (Q3), QUALITY CONTROL FOR HDC LYTE PLUS ( ABGEM) BLOOD GAS ANALYZER (Q3)