Inspection, Testing & Audit Tenders in Gujarat

Digital Clamp on earth tester with automatic self-calibration, Jaw capacity 32mm, 4 digit LCD display with 47 x 28.5mm in length, automatic range selection and 0.01ohm to 100 ohm resistance measuremen

Supply of set of Torque Wrench and sockets as per Annexure-A for Mahakumbh Mela-2025. Calibration Certificate from NABL or Govt. Approved LAB required along with Supply. accepted make/brand-AUTHORISAT

Digital Clamp on earth tester with automatic self-calibration, Jaw capacity 32mm, 4 digit LCD display with 47 x 28.5mm in length, automatic range selection and 0.01ohm to 100 ohm resistance measuremen

Custom Bid for Services - Hiring of services for Testing and Calibration of the measuring instruments ELRs and OLRs installed or in use in drilling Rigs and FMP Electrical of ONGC Ahmedabad asset

Selection of Laboratories for Testing of Products/Material - HbA1C Kit; HbA1C Kit; Kit; HbA1C Kit, Selection of Laboratories for Testing of Products/Material - HbA1C Kit Control High Level and Low Level Kit; HbA1C Kit Control High Level and Low Level ... - Quality control for ... ml; Quality control for ... Kit; Quality control for ...

Custom Bid for Services - RA FOR CALIBRATION OF WIND SENSOR OF WSDI MAKE AERONAUTICAL AND GENERAL INSTRUMENTS LTD VIEW WSDI SENSOR SHOWING ERRATIC READING WHILE OPERATION Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Custom Bid for Services - PPM CARD OF OWS MALFUNCTIONING RA FOR CALIBRATION AND SERVICEABILITY CHECKS OF BILGE OWS Similar Category Repair and Overhauling Service Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) Repair, Maintenance and Installation of Plant Systems/Equipments

Custom Bid for Services - Hiring of services for calibration of test equipments LP calibrator 01 and temperature calibrator 01 Similar Category Repair and Overhauling Service Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) Repair, Maintenance and Installation of Plant Systems/Equipments

Design, Engineering, Supply, Testing, Supervision of Installation and Commissioning, Training, SAT, Warranty and FCRI calibration of line MFM and Master MFM based Proving System for Mineral Turpentile Oil product at IOCL Gujarat Refinery.

Replacement of Fuel cell sensor with calibration of Tayal Tech make 02 Nos of Breath Analyzer machines as per Annexure-A. Procurement from OEM or OEM authorized dealers only are instructed to upload

REPLACEMENT OF FUEL CELL SENSOR FOR TAYAL TECH BREATHANALYZER MODEL NO ALCOKHOJ-2018 WITH CALIBRATION AS PER RDSO Spec.NO RDSO/2015/EL/SPEC/0119,(Rev "2") DT-15/03/2018 Make/Brand: Tayaltech

Replacement of fuel cell sensor and calibration of breath analyzer sets of various make as per Annexure-A. Procurement from OEM or OEM authorized dealers only are instructed to upload valid OEM author

Calibration gas mixture in new 0.5 Ltr w/c Aluminum/Carbon Steel high-pressure canister with fine control needle valve & septum as spares to draw sample directly from canister using GC syringe. Detail

CALIBRATION GAS MIXTURE IN NEW 0.5 LTR W/C ALUMINUM/CARBON STEEL HIGH-PRESSURE CANISTER WITH FINE CONTROL NEEDLE VALVE & SEPTUM AS SPARES TO DRAW SAMPLE DIRECTLY FROM CANISTER USING GC SYRINGE. DETAIL

Custom Bid for Services - TOTAL PRICE INCLUDING APPLICABLE GST IN PLUS OR MINUS OR EQUAL TO OVER GAILS TOTAL ESTIMATED AMOUNT AS PER SPECIFICATION AND QUANTITY Specified at BOQ Similar Category Calibration Services

SET OF STANDARD CALIBRATION GAS CANISTER FOR DGA CONSISTING OF METHANE, ETHANE,ETHYLENE, ACETYLENE, HYDROGEN EACH 1000 PPM, CO AND CO2 EACH 5000 PPM AND NITROGEN BALANCE-01 NO, EACH GASES 500 PPM - 01

STANDARD CALIBRATION GAS CANISTER FOR DGA CONSISTING OF METHANE, ETHANE,ETHYLENE, ACETYLENE, HYDROGEN EACH 1000 PPM, CO AND CO2 EACH 5000 PPM AND NITROGEN BALANCE-01 NO, EACH GASES 500 PPM - 01 NO, EA

Calibration Gas Mixture in new 0.5 ltr W/C Aluminum/Carbon Steel High-Pressure Canister with Fine Control Needle valve & Septum as spares to draw sample directly from canister using GC Syringe as per

Calibration of tanks at Gujarat Refinery.

Ratchet Type Torque Wrench, 3/4 inch Sq. drive, Range 200-815 Nm, IS:7268-1974 for industrial use with calibration and guaranty/warranty certificate. Make: Torque master TM 600R or Mac master TW 600R

SET OF STANDARD CALIBRATION GAS CANISTER FOR DGA CONSISTING OF (1) METHANE, ETHANE,ETHYLENE, ACETYLENE, HYDROGEN EACH 1000 PPM, CO AND CO2 EACH 5000 PPM AND NITROGEN BALANCE-01 NO,(2) EACH GASES 500 P

Calibration Gas Mixture for DGA with needle valve for drawing the gas. Each can contains 10 Ltrs of Gas at a pressure 20kg/cm2 in aluminum can have the following composition. (1) Methane - 1000 PPM, (

TORQUE WRENCH, 1/2 INCH SQUARE DRIVE, ALONG WITH CALIBRATION CERTIFICATE. MAKE: TAPARIA - MODEL NO. TW 160 (TORQUE RANGE: 50-220 Nm) OR BRITOOL - MODEL NO. EVT 2000A (TORQUE RANGE: 50-225 Nm) OR GROZ

Calibration Gas Mixture for DGA with needle valve for drawing the gas. Each can contains 10 Ltrs of Gas at a pressure 20kg/cm2 in aluminum can have the following composition. (1) Methane - 1000 PPM, (

Calibration Gas Mixture for DGA with needle valve for drawing the gas. Each can contains 10 Ltrs of Gas at a pressure 20kg/cm2 in aluminum can have the following composition. (1) Methane - 1000 PPM, (

On-Site Calibration of RTD and Thermocouples (TC) by NABL accredited Calibration Laboratory at 2X250MW GSECL BLTPS Bhavnagar Site.

Circuit Breakers with Integral Overcurrent Protection (RCBO) as per IS 12640 (Part 2) IEC 61009 - 1 (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years of Experience and Turnover No Bid to RA enabled No Type of Bid ... Empanelled Inspection Agency /Authority ... ONGC QUALITY ASSURANCE DEPARTMENT ...

Custom Bid for Services - HIRING OF SERVICES FOR PERIODIC INSPECTION, TESTING, REPAIRING AND CALIBRATION OF RELAYS AT GAIL PLANT GANDHAR, Custom Bid for Services - HIRING OF SERVICES FOR PERIODIC INSPECTION, TESTING, REPAIRING AND CALIBRATION OF ... Category Calibration Services ... Services Calibration Services

DESIGN,DETAIL ENGG,PREPARATION OF DRAWINGS,SUPPLY OF ALL MATERIALS,FAB.,ERECT.,LAYING,PAINTING,CALIBRATION,TESTING AND COMMISSIONING OF AUTOMATIC FIRE DETECTION AND FOAM BASED EXTINGUISHING SYSTEM FOR RIM SEAL FIRE PROTECTION OF FLOATING ROOF TANK

Design, Engineering, Transportation, Supply, Testing, Supervision of installation and commissioning, training, SAT, warranty and FCRI calibration of master MFM based proving system for PGH/FGH, PFRC, MTBE, HAB and FO/HVFO products at New TTL area

TORQUE WRENCH RATCHET TYPE, CAPACITY 1-7 KGM (14-70 NM) WITH 1/2 INCH SQ DRIVE IS:7268-1974, MAKE- TAPARIA, GRIPHOLD, MAC MASTER OR SIMILAR. (Calibration certificate should be provided by the firm) Fi

Bore gauge range dial 250-400 mm with dial LC 0.001 mm, Calibration certificate - Required from NABL/NPL accredited agency. Make-model 511-826 of Mitutoyo, Art no 4475003, 844 NA of Mahr, model no CG-

TORQUE WRENCH 1/2 INCH SQUARE DRIVE( RATCHET TYPE )WITH SQARE COUPLER, RANGE 70 TO 340 NM ( LEAST COUNT 10 NM OR BETTER )WITH CALIBRATION CERTIFICATE OF ONE YEAR VALIDITY , CALIBRATED AT 70 NM 100 NM

Custom Bid for Services - 9030C25A71 Expert Service of Ms Emerson India Private limited for troubleshooting of Emerson make Coriolis type MFMs and FCRI calibration of master MFM installed at IOCL Gujarat Refinery Similar Category Support Services

Custom Bid for Services - BIDDER HAS TO QUOTE LUMPSUM AMOUNT INCLUDING GST FOR EXPERT SERVICE FOR WEIGH BRIDGE SYSTEM FOR A PERIOD OF 02 YEARS REFER SCC SOW SOR OF TENDER DOCUMENT Similar Category Calibration Services

Calibration Services - TOTAL CHAREGES INC GST FOR PROFICIENCY TEST FOR CHEMICAL COMPOSITION OF LOW ALLOY STEEL 01 No; TOTAL CHAREGES INC GST FOR PROFICIENCY TEST FOR CHEMICAL COMPOSITION OF LOW ALLOY STEEL 01 No; NABL Labs; Buyer premises (onsi.., ... (onsi.., Calibration Services ... (onsite), Calibration Services ... (onsite), Calibration Services ... (onsite), Calibration Services ... (onsite), Calibration Services ...

Custom Bid for Services - 9030C25D04 Lining up agency for Providing assistance in Testing and Sampling activities in the Gujarat Refinery, Quality Control Laboratory Vadodara Fixed part item no 00010 and 00020, Custom Bid for Services - 9030C25D04 ... Refinery, Quality Control Laboratory ...

LED Luminaire for Floodlight (V2) Conforming to IS 10322 (Part 5/Section 5) (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years of Experience and Turnover No Bid to RA enabled No Type of Bid Two Packet Bid Time ... Empanelled Inspection Agency /Authority ... ONGC QUALITY ASSURANCE DEPARTMENT ...

Multi Sera Calibrator, Intensity Bulb, PM Kit for 3part BC21s, 3D Control, Cuvettes

Re-Certification of Emergency Response and Disaster Management Plan (ERDMP) for WRPL under PNGRB regulations 2010 through PNGRB empanelled TPI agency.

"Set of Air Spring Height Gauges (GO & NO GO) As per Ref. Drg. No. SK-ASG-1/2019. Gauge Material - Tool Steel to IS 3748/90, Hardness- 50/55 HRC. Supply is acceptable only with Calibration Certificate

1/2'' SQ DRIVE RATCHET TYPE TORQUE WRENCH CAP-7-35 Kgf.m (70-340 NM), AS PER DRAWING: IS:6789-2003 OR LATEST WITH CALIBRATION CERTIFICATE SHOULD BE PROVIDED BY THE FIRM, WITH DETAILS OF MASTER EQUIPME

Customized AMC/CMC for Pre-owned Products - Approval for Evaluation criteria and Tender documents for bid through GeM for Calibration and Annual Maintenance Contract of 09 Endress Hauser make Coriolis Mass Flow Meters at Ahmedabad Terminal, Sidhpur T..

A set of standard gas mixture for calibration of DGA. 10 ltr capacity Aluminum can with nozzle and screw fine control valve on to outlet valve on top of the can to obtain required gas flow with regula

HSS grade M42, size: 1-1/4 inch 8 TPI UN hand tapset (consist of 3 pcs) confirming to BS 949 (Q3)

On-Site Calibration of Pressure Transmitters (PT) and Differential Pressure Transmitters (DPT) by NABL accredited Calibration Laboratory at 2X250MW GSECL BLTPS Bhavnagar Site.

As per Scope of work in the proposal.

Calibration of 18 Nos. Breath Analyzer make Tayaltech model ALPHA/KATS for validity one year due in Feb 2023 to Feb 2024 by OEM for use in JP Div Lobby ie FL,RE,JP,BKI. Status of Breath Analyzer in lo

Custom Bid for Services - 9030C26C18 Annualized Rate Contract ARC for Witnessing the calibration and testing and rule 18 certification of safety valves of IOCL Gujarat Refinery Koyli and IOCL Gujarat Refinery Dumad Facility by PESO recognised compete.. Similar Category Support Services

Repair and Overhauling Service - TECHNICAL OFFICE COMPUTER TABLE LOCKE & 04 IN NOS FILE DOOR TO BE FABRICATED OR RENEWED AND CALIBRATION OF 02 NOS H2S SENSOR AND 04 NOS WOODEN GRATING TO BE REPAIRED AND RENWED; TECHNICAL OFFICE COMPUTER TABLE LOCKE ..